Parts for Ge PFIC1NFZBBV: 01 - Doors Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

This flat foam insulation assembly fits inside the freezer door to restore proper door insulation and help the freezer maintain consistent interior temperatures. Replacing degraded door foam can reduce frost buildup and improve cooling efficiency. What it does:

• Replaces the door's internal insulation to help keep cold air inside the freezer
• Helps reduce frost and ice buildup caused by poor door sealing or insulation
• Addresses uneven or rising freezer temperatures linked to lost insulation
• Supports overall appliance efficiency by restoring intended thermal barrier

• Disconnect power to the appliance before beginning any repair.
• Remove the freezer door liner or inner panel per the manufacturer's instructions to access the foam.
• Handle the foam and surrounding components carefully to avoid tearing or damaging the door liner.

Forms an airtight seal around your refrigerator door to maintain stable temperatures and prevent frost buildup. Replace when worn, torn, or no longer sealing properly.

Refrigerator door gasket creates an airtight seal to keep cold air in. Replace if door won't seal, frost builds up, or gasket is torn. Confirm fit with model.

Freezer door handle trim assembly for your refrigerator. Replaces cracked, broken, or damaged trim pieces around the handle. Essential cosmetic part.

This freezer trim handle assembly replaces a worn, cracked or missing freezer door trim so the door looks and functions like new. It restores a finished grip area and secures the trim around the freezer door edge. What it does:

• Replaces damaged or broken freezer door trim for improved appearance and safe grip
• Provides the finished trim piece where fingers normally pull the freezer door
• Helps stop loose or rattling trim that can catch on clothing or the freezer gasket
• Matches OEM fit to align with existing door mounting points

• One freezer trim handle assembly as shown

• Basic hand tools typically required; keep fasteners from original part for alignment
• Power off and unplug the appliance or disconnect power at the breaker before starting work
• Handle panels and edges may be sharp—wear gloves and work carefully
• Do not overtighten screws; ensure trim seats evenly to avoid stress or gaps

Mounting bracket that secures and stabilizes refrigerator panels and assemblies. Replace when the original bracket is broken, cracked, or missing.

Machine screw for refrigerator panels, brackets, and assemblies. Replaces lost, stripped, or damaged fasteners to restore secure fit and stability.

Lower left-hand shelf slide bracket for refrigerators. Supports and guides sliding shelves. Replace if cracked, broken, or missing to restore smooth operation.

Secures brackets, panels, and components inside your refrigerator. Replace stripped, rusted, or missing hardware to restore tight alignment and stability.

Replace a cracked, broken, or missing lower slide-out basket in your refrigerator. Restores organized storage for produce and fresh foods.

Replace your refrigerator door gasket to restore the airtight seal and prevent cold air loss. Install when gasket is cracked or loose. Confirm fit.

The French Door Gasket is an OEM part for GE refrigerators. This gasket seals the gap between the French doors of the refrigerator, maintaining an airtight seal to prevent warm air from entering and cool air from escaping. It ensures the refrigerator operates efficiently by keeping the internal temperature consistent.

You should replace this French door gasket if it becomes worn out or damaged. Causes of a bad gasket include regular wear and tear, damage from cleaning, or the gasket becoming brittle over time. A compromised gasket can lead to increased energy consumption and food spoilage.

Symptoms of a bad French door gasket include:

• Warm air entering the refrigerator
• Frost buildup around the doors
• Higher than usual energy bills
• The refrigerator door not sealing properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement door handle trim assembly for your refrigerator. Installs on the exterior door to restore appearance and grip. Needed when cracked or worn.

Door stop component that prevents your refrigerator door from swinging too far open. Replace this part if broken, cracked, or missing to restore proper door control.

Plastic retaining clip that secures drawer divider modules in place. Replaces broken, cracked, or missing snuggers to restore proper fit and separation.

This thimble door is the molded trim piece that surrounds the refrigerator/freezer door opening, restoring proper fit and finish. It replaces damaged or worn trim to reduce drafts and improve door alignment and appearance. What it does

• Covers and protects the door opening edge, providing a finished appearance
• Helps maintain a consistent seal by supporting proper door alignment
• Reduces air leaks and drafts at the door opening when installed correctly
• Replaces cracked, warped, or missing trim that can catch or rub during door use

• One thimble door trim piece as shown

• Disconnect power to the appliance before beginning any repair
• Typically secures with clips or screws; inspect existing fasteners and retainers for reuse
• Handle trim gently to avoid cracking; align carefully to ensure a proper fit

Door hinge thimble for refrigerator freezer doors. Installs on door hinge pivot points. Replace if cracked, worn, or missing to restore proper alignment.

Left-hand door closure cam for refrigerators. Installs on the door hinge assembly to control door closure. Replace if cracked, broken, or worn.

Clear flip-up cover for the door-mounted dairy compartment. Replaces cracked, broken, or missing dairy doors to restore a clean look and keep items secure.

Refrigerator dairy door compartment that mounts on the right door to store butter, cheese, and small items. Replace if cracked, broken, or missing.

Wire beverage rack installs on refrigerator door to organize cans and bottles. Replace if broken, bent, or missing to restore door storage space.

A replacement module shelf assembly that supports and secures a refrigerator's electronic control module and wiring inside the cabinet, helping maintain proper component position and reduce vibration-related connection issues. What it does:

• Provides a stable mounting surface for the main control module and related wiring harness
• Keeps the module correctly positioned to prevent loose connections or intermittent electrical symptoms
• Helps reduce vibration and rattling that can occur when the original shelf is cracked or broken
• Maintains proper spacing to avoid contact with other components that might cause wear or shorting

• One module shelf assembly

• Disconnect power to the appliance before beginning any service
• Handle the shelf and electrical connectors gently to avoid damaging clips or wiring
• Installation typically requires basic hand tools and removing interior panels for access
• Module and harness are fully seated and secured before restoring power

This glass or wire shelf is permanently mounted inside the fresh food compartment of the refrigerator to provide storage space. Replace when the shelf is cracked, broken, or no longer securely holds items due to damaged mounting brackets.

Lower right-hand freezer rail holder mullion for your refrigerator. Replacement for cracked, broken, or missing original part. Secures interior components.

Left-hand freezer rail holder for refrigerators. Secures and stabilizes sliding drawer rails. Replace if cracked, broken, or missing to restore smooth operation.

Replace your refrigerator's freezer handle end cap if it's cracked, broken, or missing. This cosmetic cap installs on the handle edge for a finished look.

Size: 10-32 GXTT FLP.595 S

This articulation mullion is the flip-out center rail on a French-door refrigerator. It swings into place as the door closes to seal the gap between doors, helping maintain proper temperatures and limit moisture around the center joint.

• Provides the pivoting center rail that engages the opposite door to complete the seal
• Common signs of failure: cracked or loose mullion, won't flip or latch, doors not closing smoothly, or moisture/condensation near the center
• Helps restore proper door sealing and reduce air leaks between doors
• Mounts on the door edge in the same location as the original flipper

• Disconnect power to the refrigerator before servicing
• Remove door bins if needed for access
• Remove mounting screws, lift off the old mullion, position the new mullion, and secure with the original hardware
• Open and close the door to ensure the mullion extends, retracts, and seals correctly

Door bumper for French door refrigerators. Cushions and stops door travel. Replace if cracked, missing, or worn to prevent door damage.

Small cushioning bumper for French-door refrigerators. Prevents door rattling and protects against wear. Replace if cracked, missing, or worn out.

Refrigerator handle trim assembly that installs on the door to provide a finished appearance. Replace if cracked, chipped, discolored, or missing.

Decorative trim piece that covers the top edge of your refrigerator's fresh food door. Replace if cracked, broken, discolored, or missing.

Replaces damaged or worn decorative trim on the front side edge of your refrigerator door. Restores a finished look and protects the door edge.

Replaces the decorative side trim on your refrigerator's fresh food or freezer door. Needed when the original trim is cracked, broken, or missing.

This is a replacement door side trim that restores the finished edge and appearance of the freezer/refrigerator front. It helps cover and protect the door jamb while keeping the cabinet looking complete. What it does

• Replaces damaged or cracked side trim on the front of a refrigerator/freezer door
• Restores a clean, finished appearance and hides the door edge
• Helps protect the door jamb from dings and moisture at the edge
• Works with the existing hinge and door assembly to maintain proper door fit

• One door side trim piece

• Remove power to the appliance before starting repairs and work with the door supported
• Trim typically secures with clips or screws—retain existing fasteners or replace with OEM hardware
• Handle carefully to avoid scratching the finish; align trim before fully fastening

Trim piece that finishes the side edge of your refrigerator door. Replace if cracked, chipped, discolored, or missing for a clean appearance.

Freezer door side trim assembly for your refrigerator. Replaces cracked, broken, or missing trim pieces along the side of the freezer door.

Exterior trim piece for refrigerator. Installs along outer edges or panels. Replace if cracked, broken, discolored, or missing to restore appearance.

Bottom divider basket for refrigerator freezer compartment. Organizes frozen items and creates separate storage sections. Replace if cracked or broken.

Hex washer head screw secures panels, brackets, and small assemblies inside refrigerators and ranges. Replace stripped, missing, or damaged screws.

Fastens refrigerator panels, brackets, and internal components. Replace this screw if the original is missing, stripped, or damaged to restore secure mounting.

The Gear Pinion is an OEM component specifically designed for GE French door refrigerators. This part is responsible for the smooth operation of door hinges and closing mechanisms. 

The gear pinion works together with other inner door components to evenly distribute strength across the refrigerator’s motion system. This ensures doors move fluidly and stay securely sealed when closed. 

Causes of a bad gear pinion can include wear from repetitive use over many years, stress from overloading the doors, or misalignment of connecting mechanisms.

Symptoms of a bad gear pinion include: 

• Doors not closing or latching properly
• Binding or sticking movement  
• Noise or vibration when opening/closing
• Increased effort required to operate doors

Note: Right-hand side

Replace this precision gear with a genuine GE OEM part to restore dependable door functionality. This product is also compatible with Hotpoint, RCA, and Kenmore refrigerator models.