Parts for Ge GPE12FGKCBB: Doors Parts

This fixed freezer shelf provides a stable storage surface inside the freezer compartment, helping keep frozen items organized and preventing items from shifting or blocking airflow. Direct replacement for a worn, damaged, or missing shelf. What it does:

• Supports frozen food containers and packages so items stay organized and accessible
• Restores proper shelving after cracks, chips, or sagging that let items fall through
• Helps keep airflow clear by providing the intended shelf plane in the freezer
• Safe, direct-fit shelf when the original shelf is broken or missing

• Unplug the appliance or disconnect power before removing or installing the shelf.
• Remove food and any loose items from the shelf area before starting.
• Support the shelf while disengaging clips or rails to avoid dropping or damage.
• Refer to the refrigerator's owner manual for exact removal steps.

This reversible door hinge plug covers and protects the refrigerator door hinge for a finished look and to keep dirt and moisture out. It restores the hinge appearance and helps prevent debris buildup that can affect hinge movement. What it does:

• Snaps into the hinge opening to cover exposed hardware and mating surfaces
• Helps keep dust, grease, and moisture from collecting in the hinge area
• Restores a clean, finished appearance to the door edge
• Can reduce noise or rubbing caused by debris trapped at the hinge

• One reversible door hinge plug (plastic)

• Designed for simple push-in installation; align and press until it snaps into place
• No special tools typically required; use a soft cloth to protect surrounding surfaces
• Inspect hinge and mounting hardware for wear or damage before installing
• If the plug is brittle or damaged, replace to maintain protection and fit

This replacement freezer door gasket seals the freezer compartment to help maintain proper temperature and limit frost buildup. It restores an even door seal to improve cooling consistency and reduce moisture intrusion. What it does:

• Creates an airtight seal around the freezer door to help keep cold air in and warm, moist air out
• Helps reduce frost and ice buildup caused by air leaks at the door
• Addresses symptoms like excessive frost, warm/freezer not staying cold, or a door that feels drafty
• Supports more consistent compressor cycling by preventing unnecessary warm-air infiltration

• One freezer door gasket

• Disconnect power before servicing the appliance to avoid electrical or compressor hazards
• Remove the old gasket and thoroughly clean the gasket channel before installing the new seal
• Press the new gasket evenly into the channel, starting at one corner and working around the perimeter to ensure full seating
• After installation, check the door for an even, continuous seal; replace or re-seat if gaps remain.

This door stopper is a small rubber bumper that cushions and limits door travel to prevent impact damage and reduce noise. It restores proper door alignment and quiets slamming on compatible appliances. What it does:

• Absorbs impact when the door reaches its stop to prevent chipping or dents.
• Helps maintain correct door position and seal by limiting over-travel.
• Reduces vibration and noise from closing or banging doors.
• Commonly used where a soft, durable bumper is required on appliance doors.

• Inspect the mounting area and remove debris before installing the bumper.
• Press or slide the stopper into its locator until fully seated; some models may require a light tap.
• If fasteners are present on your model, secure with the original screw(s); do not overtighten.
• Disconnect power and follow the appliance manufacturer's safety instructions before working near electrical components.

Replacement door gasket that restores a tight seal on the freezer door to help keep cold air in and reduce frost buildup. Restores proper sealing to improve cooling consistency and help protect frozen food quality. What it does:

• Seals the freezer door to limit cold air loss and reduce warm-air infiltration.
• Helps prevent frost buildup and excessive ice formation inside the freezer.
• Can reduce temperature fluctuations that cause food to thaw or freezer to run more frequently.
• Common symptom indicators: visible gaps around the door, frost accumulation, or a freezer that runs continuously.

• Disconnect power and remove food and ice from the freezer before starting.
• Start at a corner and press the gasket into the door channel, working around the door for even seating.
• Inspect for gaps around the entire door after installation and adjust as needed.
• Follow OEM installation instructions for any model-specific steps or recommended seating techniques.

The Fixed Door Shelf is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door shelf can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door shelf.

Signs of a faulty door shelf include:

• Cracked or broken shelf
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's door by replacing the faulty door shelf with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This replacement condiment shelf restores organized storage on the refrigerator door so bottles, jars and small containers sit securely. Simple direct-replacement shelf that reattaches to the existing door rails for reliable everyday use. What it does:

• Provides a dedicated shelf on the refrigerator door for condiments, sauces and small containers.
• Holds items upright and helps reduce shifting or falling during normal door use.
• Replaces cracked, chipped or missing door shelves that no longer secure items.
• Matches OEM door-rail attachment style for a straightforward swap with the original shelf.

• Remove all items from the door before starting and work with the door supported.
• Inspect door rails and mounting grooves for damage; replace damaged clips or hardware as needed.
• Lift the old shelf out of the rails (or unclip, depending on style) and seat the new shelf into the door rails until it engages; do not force.

A replacement center hinge bushing that supports smooth door pivoting and helps keep refrigerator/freezer doors aligned. Restores proper door swing and reduces rubbing or uneven gaps for a better seal and operation. What it does:

• Guides the center hinge pin so the door opens and closes smoothly
• Helps maintain proper door alignment to prevent rubbing or sagging
• Reduces wear on the hinge pin and surrounding hinge surfaces
• Can help improve door sealing when misalignment is causing gaps

• One center hinge bushing

• Intended for the center/top door hinge; refer to your service manual for correct hinge orientation
• Remove power or follow appliance-specific safety steps before disassembling door/hinge
• Inspect hinge pin and surrounding parts for wear; replace damaged components as needed
• Use basic hand tools; do not force parts—replace per OEM guidance

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.