Parts for Ge GPE12FGKCBB: Case Parts

This top hinge cover is a trim piece that hides and protects the refrigerator's top hinge assembly while restoring a finished appearance. It's reversible to fit either side and replaces damaged, cracked, or missing hinge trim. What it does:

• Covers and protects the top hinge area from dust and debris.
• Restores the refrigerator's finished look by replacing cracked or broken trim.
• Reversible design fits left- or right-side top hinge installations.
• Helps prevent clothing or items from catching on exposed hinge hardware.

• One top hinge cover (reversible)

• Disconnect power to the appliance or unplug the refrigerator before beginning work.
• Remove the door or support the door per manufacturer instructions to relieve hinge load before removing hinge parts.
• Use basic hand tools; handle trim carefully to avoid cracking plastic.

This bottom hinge is the refrigerator door pivot that supports and aligns the lower door section for smooth opening and secure closing. It replaces a worn or damaged hinge to restore proper door movement and seal. What it does

• Supports the weight of the lower refrigerator/freezer door and provides the pivot point for swinging motion
• Keeps the door aligned so the gasket seals evenly to maintain temperature control
• Reduces sagging, scraping or uneven gaps that can prevent full closure
• Stops excessive noise or grinding caused by worn hinge surfaces

• Disconnect power to the appliance before starting work and remove food from the door area
• Support or brace the door during removal to prevent drops or damage to the cabinet and gasket
• Basic hand tools required; retain existing fasteners unless replacements are supplied

This replacement door switch restores proper door sensing so your refrigerator's interior lights turn on when the door opens and shut off when it closes, helping prevent warm spots and nuisance door-ajar alerts.

• Spring-loaded plunger detects the door's open/closed position
• Switches power to the interior lights; on many models also signals door-ajar or fan interlock functions
• Helps prevent lights from staying on and heating the compartment
• Typical failure signs: lights won't turn on, lights stay on, or door-ajar warnings with the door closed

• Disconnect power to the refrigerator before servicing
• Carefully pry the old switch straight out of the liner or remove its mounting screws, as applicable
• Move wires to the new switch one at a time to keep connections correct
• Seat the new switch fully; verify the plunger moves freely and lights operate before closing up

This adjustable foot lets you level and stabilize your appliance to reduce rocking and uneven operation. It provides height adjustment for a secure, even installation and helps doors seal properly. What it does:

• Raises or lowers one corner of the appliance to correct an out-of-level cabinet or floor.
• Stabilizes and prevents rocking or vibration that can cause noise or wear.
• Helps improve door alignment and sealing on refrigerators and other freestanding appliances.
• Typical symptom: appliance tilts, rocks, or doors don't close evenly.

• One adjustable foot (leveling leg)

• Unplug the appliance and remove food or loose items before tilting or adjusting.
• Support the unit securely; use a helper or appliance jack to prevent tipping.
• Turn the leg clockwise to lower the appliance or counterclockwise to raise it; make small adjustments until level.
• Do not overtighten or force—replace with matching part number if damaged.

This door stopper is the replacement plastic stop that limits a refrigerator door's swing to prevent over-travel and reduce stress on the hinge. It helps keep the door aligned and reduces banging or sudden slams. What it does:

• Acts as a bumper and travel limit for the refrigerator door to prevent over-opening and hinge damage
• Cushions the door to reduce noise from slamming and repeated impacts
• Helps restore proper door alignment when the original stopper is worn or broken
• Works with the door hinge/assembly to maintain smooth, controlled movement

• One door stopper (exact part WR01X20397)

• High-level replacement: remove the door hinge or lift the door as required to access the stopper — follow your model's service instructions
• Support the door while you work to prevent damage or injury
• Use basic hand tools; do not force components
• If work requires moving electrical controls or lights, unplug the appliance or switch power off before starting

A replacement left bottom hinge that supports and pivots the refrigerator door to ensure proper alignment and smooth opening and closing. Restores secure door mounting and helps maintain an even seal along the bottom edge. What it does:

• Supports the lower corner of the refrigerator door and provides the pivot point for opening and closing
• Keeps the door aligned to help maintain a consistent seal and even contact with the cabinet
• Replaces worn or damaged hinge hardware that can cause door sag, misalignment, scraping or uneven gaps
• Helps reduce binding or noisy movement when the original hinge is bent, worn or broken

• Disconnect power to the appliance before starting and remove perishable food or secure temperature-sensitive items
• Support the door from below while removing hinge fasteners to prevent sudden drops or damage
• Use appropriate hand tools; inspect mounting screws and the mating surface and replace any damaged fasteners