Parts for Ge GPE12FGKCBB: Fresh Food Section Parts

The Evaporator Fan Motor is an OEM replacement part for GE refrigerators. It is designed to fit in the freezer compartment, to circulate cold air and maintain a consistent temperature throughout the freezer. This fan ensures proper airflow, preventing the formation of frost and ice buildup. The felt helps reduce noise and vibration, providing a quieter and smoother operation.

A bad evaporator fan can occur due to various factors, including normal wear and tear, motor failure, or damage to the fan blades. If you notice symptoms such as unusual noises, reduced cooling performance, or frost accumulation in the freezer, it may indicate a need to replace the evaporator fan.

Symptoms of a bad evaporator fan include:

• Unusual noises coming from the freezer
• Reduced cooling performance
• Frost accumulation in the freezer

Restore your refrigerator's freezer compartment by replacing the faulty freezer fan with felt using this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This evaporator cover and fan assembly replaces the evaporator housing and blower that sit behind the freezer liner, helping restore airflow across the evaporator so your refrigerator cools evenly and prevents excessive frost buildup. What it does:

• Houses the evaporator fan that circulates cold air through the freezer and fresh food compartments
• Restores proper airflow when the original fan or cover is damaged or noisy
• Helps reduce frost accumulation by ensuring consistent circulation over the evaporator
• Common symptoms: warm refrigerator, freezer not maintaining temperature, unusual fan noise, or visible damage to the evaporator cover

• Disconnect power to the appliance before starting work to avoid electrical shock
• Access typically requires removing interior liners or shelves—keep track of fasteners and clips
• Handle edges and evaporator fins carefully; wear gloves to avoid cuts
• After installation, restore power and verify proper fan operation and airflow

This refrigerator vegetable pan is the crisper drawer that holds fruits and vegetables in the fresh food compartment. Replace a cracked or missing bin to restore smooth operation and proper storage capacity.

• Stores produce in the crisper area of the refrigerator
• Slides on the shelf rails for easy access
• Replaces bins that are cracked, chipped, or have broken tabs
• Helps resolve sticking or misalignment caused by a deformed drawer

• Disconnect power before servicing interior parts
• Open doors fully and remove any items or obstructing bins
• Slide the old drawer out; align and slide the new drawer onto the correct rails until fully seated
• Check for smooth travel and proper fit before loading produce

This vegetable pan cover assembly replaces a cracked, warped or missing crisper cover to help keep produce contained and separated in the refrigerator. It restores the cover that sits over the vegetable/fruit drawer for normal use and appearance. What it does:

• Covers and protects the refrigerator vegetable/crisper pan, helping contain produce and spills.
• Helps maintain separation between crisper drawer and shelf space.
• Stops rattling or shifting caused by a broken or loose cover.
• Useful when the original cover is cracked, chipped, warped or missing.

• One vegetable pan cover assembly only.

• Remove stored food from the crisper area before installing.
• Typically snaps or slides into place; no special tools usually required. Inspect existing mounting points for damage.
• Handle carefully to avoid scratching or cracking the part during installation.

This lamp cover is the replacement light lens that protects and diffuses the interior light in compatible GE refrigerators, restoring even lighting and protecting the bulb from spills and impacts. What it does:

• Covers and protects the refrigerator interior light bulb from bumps, spills and debris
• Diffuses light for more even illumination inside the compartment
• Replaces cracked, chipped or missing lenses that can allow moisture or damage to the bulb
• Helps maintain a clean, finished interior appearance

• One lamp cover / light lens

• Disconnect power to the appliance before servicing
• Remove the light bulb and any retaining clips or screws before installing the cover
• Handle the lens carefully; use gloves to avoid cuts and fingerprints
• Use only the correct replacement lens and follow manufacturer instructions for reassembly

This thermistor is a refrigerator temperature sensor that helps the control board monitor and maintain proper cooling. Replacing a faulty thermistor restores accurate temperature readings for more consistent fridge/freezer performance. What it does:

• Senses internal air/evaporator temperature and sends the signal to the control board
• Helps the control system regulate compressor and fan run cycles
• Commonly linked to symptoms like temperature fluctuations, poor cooling, or long run times
• Works as part of the appliance's temperature-management system

• One thermistor sensor

• Disconnect power to the appliance before starting any repair
• Handle the sensor and wiring carefully; avoid excessive bending or pulling on leads
• Mount and route the sensor per the manufacturer's placement to ensure accurate readings

This control interface assembly is the user-facing control and touchpad used to enter commands and display oven settings, restoring responsive button control and readout for affected units. It replaces a worn, unresponsive, or damaged control panel to bring back normal user operation. What it does:

• Provides the front user controls and display for setting bake, broil, timers and clock
• Replaces a control panel that is unresponsive, has stuck or non-working buttons, or shows incorrect/missing display segments
• Restores reliable touch/button input so oven cycles and settings register properly
• Works with the oven's electronic control to communicate user commands

• One control interface assembly (one complete user control/touchpad)

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the assembly carefully to avoid damaging the display, ribbon cable, or connectors
• Reconnect ribbon and wiring securely; verify proper seating before reassembly

This LED lamp is the interior light assembly for compatible refrigerators, restoring bright, energy-efficient lighting so you can see food clearly. It replaces a failed or dim interior lamp assembly. What it does:

• Provides steady interior illumination for refrigerator compartments
• Replaces burned-out or flickering lamps to improve visibility
• Helps identify spoiled or misplaced items by restoring proper light
• Designed to fit the factory lamp housing and electrical connector

• Disconnect power to the appliance before replacing the lamp to avoid shock.
• Remove the lens or cover, unplug the old lamp assembly, and connect the replacement to the same connector.
• Handle with care to avoid damaging the LED or connector; do not force connectors.