Parts for Ge ZICS360NHBLH: Doors Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Size: 10-32 GXTT FLP.595 S

This screw set contains #10-32 thread fasteners used to secure appliance panels and components. It provides direct-fit replacement screws to restore proper fastening and stop loose or rattling parts. What it does:

• Replaces missing or damaged #10-32 screws used on appliances
• Secures panels, brackets, trim pieces, and internal components
• Helps eliminate rattling, vibration noise, and loose fittings
• Restores factory fastening for safe, stable operation

• Disconnect power and water before servicing the appliance
• Keep small parts organized and use a magnetic tray to avoid loss
• Use the correct driver to avoid stripping screw heads; do not overtighten

This is a #10-32 x 3/4 truss-head screw designed to fasten small appliance panels and components securely. It replaces missing or worn fasteners to restore stable mounting and reduce rattles or movement. What it does:

• Secures trim, control panels, brackets, and small assemblies
• Restores tight mounting to stop panel vibration or rattling
• Keeps electrical and mechanical components properly aligned
• Works where a #10-32 machine screw with a short 3/4" length and truss head is required

• Disconnect power before working on the appliance
• Use the correct screwdriver or nut driver to avoid stripping the head
• Tighten until secure; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized for reinstallation

This euro standoff kit provides the mounting hardware used to secure trim panels and components on compatible appliances, restoring proper panel alignment and preventing rattles or loose trim. It's a direct-fit replacement for the listed part number. What it does:

• Replaces worn or damaged mounting standoffs that hold panels or trim in place
• Restores secure panel attachment to reduce vibration, rattling, or misalignment
• Helps maintain proper spacing between panels and cabinet for correct fit and finish
• Designed to match the original part's fit and function for reliable repair

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove affected trim/panel carefully to access standoffs; retain screws and hardware
• Install standoffs in the original locations and tighten screws until snug — do not overtighten
• If alignment issues persist after replacement, check adjacent clips, fasteners, and mounting surfaces

Color: white

This deep fresh food door bin installs on the right-hand refrigerator door to provide sturdy storage for taller containers and everyday items. Replace a broken or missing bin to restore safe, organized space on your refrigerator door.

• Mounts to the right-side fresh food door to hold and organize items
• Deep profile adds capacity for taller containers and bottles
• Replace when the bin is cracked, warped, has broken tabs, or won't stay seated
• Common symptoms: bin falls out, leans, is loose, or is missing

• Empty the old bin; lift straight up to remove from the door liner
• Align the new bin's hooks with the slots and press down until fully seated
• Handle gently; allow plastic to warm to room temperature to reduce cracking risk
• Do not force into place; ensure correct right-side orientation

Color: white

The Freezer Drawer Gasket is an OEM replacement part for GE refrigerators. It serves as a critical seal between the freezer drawer and the refrigerator cabinet, preventing cold air from escaping and warm air from entering the freezer compartment.

Symptoms of a need to replace the freezer drawer gasket:

• Frost buildup or condensation inside the freezer compartment
• Difficulty opening or closing the freezer drawer due to a poor seal
• Visible gaps, cracks, or damage to the gasket material
• Gasket feeling brittle or not sealing properly when the drawer is closed

Causes of a faulty freezer drawer gasket can include general wear and tear over time, exposure to extreme temperatures, damage from mishandling or improper cleaning, and loss of flexibility or brittleness of the material.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This part is the door handle made for a refrigerator unit. The purpose of this handle is to provide a solid component that the user can pull to open the refrigerator door. Over time and with repeated use, this component may begin to show signs of wear and tear. The door handle can be replaced for cosmetic purposes. The door handle is simply held on with screws and is very easy to replace. A screwdriver will be needed to perform the replacement process for this refrigerator door handle. The person performing the replacement may wish to wear work gloves to protect the hande during this process.This particular white door handle is compatible with refrigerators that are manufactured by General Electric. It is sold individually. This high-quality and durable part is sourced directly from the manufacturer.

This Euro-style freezer door handle kit replaces a damaged or worn handle so the freezer door opens and closes securely. It restores a clean, finished look and reliable grip for everyday use. What it does:

• Replaces a broken, cracked or loose freezer door handle to restore proper opening and closing
• Provides a secure grip that helps prevent accidental drops or slippage when opening the freezer
• Matches the slim Euro-style profile used on many modern freezer doors for a consistent appearance
• Helps eliminate rattling or movement caused by damaged mounting points

• One Euro-style freezer door handle kit with fasteners

• Disconnect power to the appliance before beginning work and follow the manufacturer's safety guidelines
• Use basic hand tools; avoid overtightening fasteners which can crack trim or strip threads
• Support the door while removing and installing the handle to prevent stress on hinges or seals