Parts for Kenmore 253.31844104 (25331844104, 253 31844104): Doors Parts

Seals freezer door to prevent warm air entry and cold air loss. Replace if you notice frost buildup, poor sealing, or rising temps. Confirm fit with model.

Seals the refrigerator door to prevent cold air loss and maintain efficiency. Replace if torn, cracked, or not sealing properly. Verify fit by model.

White refrigerator door bar that snaps into door rack supports for organizing bottles and jars. Replace if cracked, broken, or missing. Easy install.

Replacement door rack support for refrigerator door bins. Secures door shelves to the refrigerator door. Replace if cracked, broken, or missing.

Replacement door rack support for refrigerators. Secures bins and shelves on the refrigerator door. Replace when cracked, broken, or missing.

Structural bracket that mounts and secures door racks inside your refrigerator door. Replace if cracked, broken, or missing to restore proper bin support.

Replacement door rack support for refrigerator door bins. Snaps into place to secure door shelves. Needed when original support is cracked or broken.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

White refrigerator door bar that snaps into door rack supports for organizing bottles and jars. Replace if cracked, broken, or missing. Easy install.

Bisque plug insert for refrigerator door hinge bearing hole. Replaces missing, cracked, or damaged plugs. Covers hinge pin opening for clean finish.

This small white plastic plug covers an unused hinge bearing hole on the refrigerator door, typically left open when the door is configured to swing in one direction. It provides a clean, finished look and prevents moisture or debris from entering the hole. Replace this plug if it is missing, cracked, or yellowed, restoring the door's appearance.

This outer freezer door panel replaces a cracked, dented or cosmetically damaged front to restore the freezer's appearance and fit. Designed to match the original door's shape and mounting points for a clean finish. What it does:

• Replaces a damaged or scratched freezer door front to improve appearance
• Provides proper surface for existing handle and trim to reattach
• Restores alignment and sealing where outer panel wear causes misfit
• Helps protect the inner door liner and components from external damage

• One outer freezer door panel

• Basic disassembly of freezer door trim and handle required; keep all fasteners for reassembly
• Transfer any hardware, insulation, or inner panel pieces only if instructed by the OEM
• Use proper support for the door during work to avoid bending or injury
• Disconnect power to the appliance before major disassembly and follow safety guidance

This replacement door stop helps keep a refrigerator door from swinging past its intended range, protecting the hinge and cabinet. Fits at the door hinge area to restore correct stopping and smooth door motion. What it does:

• Limits door travel to prevent over-rotation and cabinet damage
• Helps maintain proper door alignment for a secure seal
• Stops excessive force that can stress hinges or cause the door to come off
• Commonly replaced when the door no longer stops or binds during opening/closing

• One door stop

• Unplug the appliance or disconnect power before beginning any repairs
• Access may require opening the hinge cover or removing the door
• Use appropriate tools and avoid overtightening fasteners to prevent damage

Replaces a broken or worn refrigerator door stop that limits door travel. Prevents over-rotation damage to hinges and cabinet. Restores smooth closing.

Limits refrigerator door swing to prevent overextension and protect hinges. Replace if cracked, broken, or missing to restore controlled door movement.

Limits door opening angle to prevent overextension and cabinet strikes. Replace if worn, broken, or missing to restore controlled door travel.

Bisque-colored plug insert for refrigerator control panels. Replaces missing, cracked, or discolored button plugs to restore a clean appearance.

Color: White

This outer refrigerator door panel replaces a damaged or dented exterior door shell to restore appearance and protect internal components. It provides a clean, finished look and a solid mounting surface for door hardware. What it does

• Replaces the exterior door shell to cover and protect the inner liner and insulation
• Restores a smooth, undented finish so the refrigerator looks like new
• Provides the mounting surface for trim, handles, seals, and other door hardware
• Helps maintain proper door alignment and fit for effective sealing

• Designed for swap-out of the existing outer panel; remove door from appliance per manufacturer instructions before beginning.
• Handle, trim, insulation, and screws may need to be transferred from the old panel.
• Use proper tools and an assistant for heavy or awkward doors to avoid damage or injury.
• Disconnect power and follow all safety precautions.

The Door Handle is an OEM replacement part for Frigidaire refrigerators. It allows for easy, opening of the refrigerator door.

Causes of a faulty door handle can include cracked or broken handle mounts from excessive pressure, material fatigue weakening the grip points over time, or damage restricting smooth movement.

Symptoms of a bad door handle include:

• Difficulty opening the refrigerator door
• Loose, detached, or missing door handles
• Sharp door edges present a safety concern
• Irregular mechanics inhibiting proper handle function

This handle is also fit for Electrolux, Gibson, and Kelvinator side-by-side refrigerator doors along with Frigidaire models.

White refrigerator door handle attaches to the fresh food door for a secure grip. Replace yours if cracked, broken, loose, or missing to restore function.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

The Screw is an OEM part for Frigidaire appliances. This specific screw is designed for Frigidaire models, ensuring a secure fit and proper function in the appliance assembly. Screws like this one are critical for holding components together tightly, contributing to the overall stability and durability of the appliance. Whether used in refrigerators, ovens, washers, or dryers, this screw plays a pivotal role in assembly and maintenance tasks, ensuring parts remain securely fastened during operation.

Over time, screws can become loose, stripped, or lost during repairs or adjustments, potentially compromising the appliance's integrity and performance.  

Symptoms of needing replacement screws include:

• Loose parts or panels on the appliance
• Difficulty in securing components during assembly or maintenance
• The need to replace lost or damaged screws during repair work

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Refrigerator door hinge bearing provides smooth pivot action for proper door operation. Replace if door sags, sticks, or pops open. Confirm fit with your model number.

This replacement egg tray restores organized egg storage in your refrigerator door or shelf area so eggs stay upright and easy to access. Durable molded plastic replaces cracked or missing trays to help keep eggs contained. What it does:

• Holds and secures eggs to prevent rolling and tipping
• Restores a missing or damaged egg storage area in the fridge
• Helps reduce mess from cracked or loose eggs
• Fits into the refrigerator door or designated shelf location

• Simply remove the old tray and snap the new tray into the existing mounting location
• No tools required for most installations; handle gently to avoid cracking the tray
• Clean with mild detergent before first use
• Keep away from high-heat sources and avoid harsh chemicals

Replace your refrigerator's handle trim piece. This decorative cover installs over the door handle. Order a new trim if yours is cracked or missing.

Plastic mounting block that anchors the refrigerator door handle assembly. Replace if cracked, broken, or causing a loose handle from repeated use.

Specs: 10-16 X 0.500