Parts for Kenmore 253.60622410 (25360622410, 253 60622410): Doors Parts

Seals freezer door to retain cold air and prevent frost buildup. Replace when torn, cracked, or no longer sealing properly. Verify fit with your model number.

Creates an airtight seal to keep cold air in and moisture out. Replace if torn, worn, or causing the door to pop open. Confirm fit with your model.

Seals freezer door to prevent air leaks and maintain temperature. Replace if door won't stay closed or gasket is torn. Confirm fit with your model number.

Refrigerator door gasket creates an airtight seal to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Seals refrigerator door to maintain cold air circulation and energy efficiency. Replace when cracked, torn, or worn to prevent condensation.

Seals the refrigerator door to prevent cold air loss and maintain efficiency. Replace if torn, cracked, or not sealing properly. Verify fit by model.

Clear storage drawer that holds fruits, vegetables and refrigerated items. Replace when your existing bin is cracked, warped or missing to restore storage.

This clear refrigerator bin stores and organizes food items on a shelf or in a door, keeping groceries contained and easy to access. It replaces cracked, broken, or missing bins so items stop shifting or falling. What it does:

• Holds and organizes produce, deli items, or packaged foods to maximize usable shelf space
• Prevents items from sliding and reduces spills inside the refrigerator
• Restores proper fit where a damaged or missing bin causes gaps or instability
• Compatible with models that use a straight-fit clear storage bin design

• One clear refrigerator bin

• Remove all contents and open the shelf or door fully before installing
• Align bin with shelf rails or mounting slots and slide until it seats securely
• Do not force; if it does not seat easily, inspect for obstructions or misaligned rails
• Clean with mild soap and water; avoid abrasive pads or strong solvents that can damage the plastic

Replacement door bin for refrigerator or freezer doors. Mounts to interior door rails to restore organized storage when original is cracked, broken, or missing.

This small black plug/button covers a hinge or bearing access hole to restore a finished appearance and help keep out dirt and debris. It's a simple, inexpensive trim piece that maintains the appliance's look and helps protect internal components. What it does:

• Covers exposed hinge or bearing access holes for a clean, finished appearance
• Helps keep dust and debris out of hinge or bearing cavities
• Prevents snagging and reduces the chance of small items entering the opening
• Matches factory appearance and fit for a seamless repair

• Push-fit design; press into the hole until fully seated
• Keep away from small children — small part is a choking hazard

Control panel button won't respond? This push button restores tactile control on your refrigerator. Snaps into place for a factory-fit repair in minutes.

This small white plastic plug covers an unused hinge bearing hole on the refrigerator door, typically left open when the door is configured to swing in one direction. It provides a clean, finished look and prevents moisture or debris from entering the hole. Replace this plug if it is missing, cracked, or yellowed, restoring the door's appearance.

Complete freezer door assembly for top-mount refrigerators. Replaces cracked, dented, or damaged outer door panels that cannot be repaired separately.

Replace your refrigerator's damaged or cracked freezer door. Direct replacement for broken, warped, or worn doors that need updating or repair.

Nameplate label for freezers and refrigerators. Mounts on exterior cabinet to display model information. Replace if faded, peeling, or missing.

Replacement nameplate label for your refrigerator. Attaches to the exterior cabinet to display model information. Needed when original is faded or missing.

Nameplate label that attaches to your refrigerator's exterior to display model information. Replace if cracked, peeling, faded, or missing.

Refrigerator door stop that prevents the door from swinging too far open. Replace if cracked, broken, or missing to protect cabinet and door hinges.

Replacement door stop for top-mount refrigerators. Installs on the door to prevent overextension. Replace if cracked, broken, or missing.

Limits refrigerator door opening range to prevent overextension and hinge damage. Replace worn or broken stops to restore controlled movement.

Limits refrigerator door swing to prevent overextension and protect hinges. Replace if cracked, broken, or missing to restore controlled door movement.

Limits door opening angle to prevent overextension and cabinet strikes. Replace if worn, broken, or missing to restore controlled door travel.

Black plug button that covers exposed holes or openings in refrigerator doors and panels. Restores a finished look and keeps dirt out of unused mounting holes.

Gray plastic plug button that covers screw holes on refrigerator exterior panels. Replace missing, cracked, or discolored plugs for a clean finish.

Color: White

This outer refrigerator door replaces a damaged or worn door to restore proper closure and appearance. It provides a secure closure surface that helps maintain internal temperature and protect stored food. What it does

• Replaces a dented, cracked, or cosmetically damaged outer refrigerator door
• Restores sealing surface so the gasket can close properly and reduce cold air loss
• Replaces a door with damaged hinge or mounting areas that prevent proper alignment
• Returns the cabinet to a finished appearance after collision or wear

• Disconnect power and remove all contents from the door before starting
• Two people are recommended for removal and installation to avoid dropping or bending the door
• Transfer handle, gasket, shelves, and hinge hardware from the old door if required; only the door panel is included
• Check hinge fasteners and gasket seating after installation; adjust hinges per the range of the appliance manufacturer's instructions

Replacement door handle set for top-mount refrigerators. Installs on exterior door to restore grip and appearance when original is cracked, broken, or worn.

Replacement door handle set for top-mount refrigerators. Installs on exterior door to restore grip and appearance when original is cracked, broken, or worn.

Replaces cracked, broken, or yellowed refrigerator door handles. Restores a secure grip for opening and closing. Easy snap-on installation available.

Exterior door handle for refrigerators. Mounts on the front door panel for opening and closing. Replace if cracked, broken, yellowed, or missing.

Replaces broken, cracked, or yellowed refrigerator door handles. Installs on fresh food compartment door with mounting screws for secure grip.

Replacement handle for refrigerator doors. Installs on the exterior door panel for opening and closing. Replace if broken, cracked, loose, or discolored.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

The Screw is an OEM part for Frigidaire appliances. This specific screw is designed for Frigidaire models, ensuring a secure fit and proper function in the appliance assembly. Screws like this one are critical for holding components together tightly, contributing to the overall stability and durability of the appliance. Whether used in refrigerators, ovens, washers, or dryers, this screw plays a pivotal role in assembly and maintenance tasks, ensuring parts remain securely fastened during operation.

Over time, screws can become loose, stripped, or lost during repairs or adjustments, potentially compromising the appliance's integrity and performance.  

Symptoms of needing replacement screws include:

• Loose parts or panels on the appliance
• Difficulty in securing components during assembly or maintenance
• The need to replace lost or damaged screws during repair work

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

Refrigerator door hinge bearing provides smooth pivot action for proper door operation. Replace if door sags, sticks, or pops open. Confirm fit with your model number.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

Secures the door handle to your refrigerator door. Replace if cracked, broken, or worn from repeated use, causing the handle to detach or feel loose.

This part number contains one (1) screw.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances