Parts for Kenmore 790.48913410 (79048913410, 790 48913410): Doors Parts

Trim piece for range control panel. Replaces cracked, chipped, or discolored trim around the control area. Restores a finished appearance to your range.

Sound dampening insulation for wall ovens. Replaces worn, damaged, or missing insulation that reduces noise and heat transfer during operation.

Oven won't maintain temperature or exterior gets too hot? This insulation blanket contains heat and protects nearby components. Moderate DIY repair.

This is the inner glass panel that sits on the inside of the oven door assembly. It helps contain heat within the oven cavity and works with the outer glass to provide insulation for efficient cooking. Replace this panel if it is cracked, shattered, or has developed visible damage that could compromise heat retention or safety.

Mounting screw for electric and gas ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or broken.

Oven doors like this one are vital in maintaining the heat inside the appliance while it is engaged. If the oven door is damaged, typically, the appliance will not heat properly, depending on the severity of the damage. Warping and bending of the door will cause the seal to become faulty, and the oven won't hold heat efficiently. Even small cracks in the glass can cause big problems. A replacement door can be ordered to restore the oven back to working condition. Before starting the installation, make sure the oven is unplugged, and the door is not hot to the touch. Open the door and remove the screws from the hinges to take off the old part. Use two people to lift the door and replace it with the new one.This Frigidaire oven door assembly is a genuine OEM replacement part sourced directly from the manufacturer. The door is sold individually. This product is compatible with Frigidaire and Kenmore appliances.

The Hinge is an OEM component specially designed for Frigidaire wall ovens. Responsible for securely mounting the heavy oven door during continuous opening/closing cycles, it ensures safe, reliable use.

Constant load stress from opening doors causes typical wear degrading precision fit reducing function over years of use. Oven access suffers from misaligned closures.

Symptoms indicating hinge issues involve:  

• Difficulty fully opening or stabilizing door position
• Noisy or off-center door alignment disturbing recipes  
• Sagging or loose door fit risking accidental closing 

Causes relate to normal metal component fatigue from sustained weight bearing multiplied by every use cycle. Impacts damage lubrication preventing smooth pivoting.

Replacing with this OEM Frigidaire hinge restores a secure, balanced opening for convenient recipe checks. Compatibility also fits some Kenmore, Gibson, and Electrolux wall ovens renewing a well-supported entrance for safety and long-lasting enjoyment. 

Mounting spacer positions and supports range components for proper alignment. Replace if worn, cracked, or missing to restore correct panel fit.

This replacement refrigerator door handle restores a secure, comfortable grip for opening and closing the appliance door. Durable and designed to match the original mounting points, it helps keep the door operating safely and reliably. What it does

• Provides a stable, ergonomic grip for opening and closing the refrigerator door
• Replaces a cracked, broken, loose, or missing handle to restore normal use
• Matches original mounting points so the door latch and seal function correctly
• Improves safety by preventing sharp edges or split plastic where damage occurred

• One refrigerator door handle

• Use basic hand tools; set screws or mounting hardware may be required
• Disconnect power and remove food from door area if work requires leaning or tilting the door
• Support the door while removing/installing to avoid stress on hinges
• Do not overtighten fasteners; inspect mounting clips and screws for wear and replace if needed

Secures and routes wiring cables inside your range or oven. Replace this retainer bracket if it's cracked, broken, or missing to properly support cables.

Metal support bracket that secures and stabilizes range components. Replaces broken, bent, or missing brackets to restore proper panel alignment.

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.

Interior panel component for microwave oven doors. Replaces cracked, dented, or broken inner door panels. Essential for maintaining door integrity.

Replacement front cabinet trim frame for microwaves. Restores finished look when original is cracked, warped, or broken. Secures control area alignment.

Microwave won't turn on or door won't close? A broken right latch head prevents the safety interlock from engaging. DIY repair in 30-45 minutes.

Microwave won't start or stops mid-cycle? A broken left door latch prevents proper door closure and engagement. Moderately difficult repair with panel removal.

Replacement mounting screw secures panels, trim, and components in microwaves. Needed when original screws are stripped, missing, or lost during repairs.

Mounting screw for microwave installation. Secures microwave to cabinet or wall bracket. Replace if missing, stripped, or damaged during installation.

This replacement adhesive label restores the appliance's original product and rating information so owners can identify model and serial details. It helps keep safety and specification markings legible for troubleshooting and repairs. What it does:

• Replaces a missing, torn, or faded product/rating label so model and serial info remain readable
• Preserves appliance specifications and safety markings used during service and part ordering
• Helps technicians confirm correct parts and diagnostics without guesswork
• Prevents misidentification that can delay repairs or lead to incorrect parts

• One adhesive product/rating label

• Clean and dry the mounting surface before applying; remove old adhesive residue
• Align carefully; press firmly from one side to the other to avoid air bubbles
• Use gloves if handling adhesive-backed labels to avoid fingerprints or oils
• Do not stretch or trim the label; replace with the exact part supplied

This stainless steel cleaner restores and protects stainless surfaces, removing fingerprints, smudges and light soils to improve appearance and make routine cleaning easier. Safe for finished stainless when used as directed. What it does:

• Cleans away fingerprints, grease, and light residue from stainless surfaces
• Restores a streak-free shine and improves overall appearance
• Helps reduce visible smudges for easier routine maintenance
• Leaves a light protective finish that helps resist fingerprints between applications

• Read and follow the product label before use; test on an inconspicuous area first
• Apply to a soft cloth and wipe with the grain of the stainless; avoid abrasive pads
• Do not use on hot surfaces, painted finishes, or unsealed metals unless manufacturer approves
• Keep out of reach of children and avoid contact with eyes; if contact occurs, rinse thoroughly

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.