Parts for Poulan 96142012201: Drive Control / Gear Case / Wheels Parts

This 8 x 1 wheel is used on many walk-behind mowers from major manufacturers. This is one of the front wheels, and it is used to drive the lawnmower and ensure it moves across the lawn. This wheel is made from durable black plastic, but it may become damaged or broken and need to be replaced. If the wheel is broken but not replaced, the lawnmower will not offer the performance expected.Inspect the wheel to determine whether it is damaged and needs to be replaced. The only tool needed to replace the wheel is a socket set and a pair of work gloves. Move the lawnmower to a flat surface while turned off and disconnect the spark plug wire. The bad front wheel can be removed using the socket before installing the replacement part. Reassemble before using.This is an 8 x 1 wheel that is sold on an individual basis. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is compatible with lawnmowers manufactured by Husqvarna, Ariens, and Poulan.

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This pawl drive is a genuine Husqvarna part, sold individually. This pawl drive can be used as a replacement part in lawn mowers and chainsaws. This pawl drive is made out of durable metal. A pawl drive might have to be replaced within the standard lifespan of a lawn mower or a chainsaw. A pawl drive could suffer damage as a result of general long-term usage or from a direct collision with a falling object or a hard surface; this damage could come in the form of puncturing, erosion to the metal material, or warping the part beyond repair. If this is the case, the pawl drive should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Pawl drive is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Weed Eater, and Ariens.

This genuine Husqvarna selector knob affixes to the selector spring as part of a mechanism that lowers and raises the handle of the lawn mower for flexible usage.The selector knob might have to be replaced in the event that it suffers damage that impedes its ability to lower and raise the handles of the lawn mower. This kind of damage can occur as a result of general wear and tear from long-term usage, exposure to the elements, or a direct collision that warps the selector knob beyond repair. If any of this form of damage occurs and prevents the adjustability of the handles, the selector knob should be replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This selector knob is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. A pulley is a common part that assists in many engines running smoothly and efficiently. Pulleys are able to connect parts together and keep them running smoothly as the engine runs. A new pulley might be needed if the current one is no longer operating properly. If the current one is stripped down, it should be replaced. This is a normal occurrence because of the amount of friction pulleys typically endure. Be sure to wear work gloves during this repair as objects can easily pinch the user. Refer to the proper user manual before beginning this repair. This part is sold individually and is sourced directly from the manufacturer. This pulley is also a genuine OEM replacement part to ensure proper fit.

This is a replacement height adjuster assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty or damaged height adjuster assembly on a variety of different lawnmower models. This height adjuster fits onto the right-hand side of the lawnmower's deck. This part allows the mower deck to be easily maneuvered to the desired height. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part, including a wrench. For more accurate information on how and where to install this height adjuster assembly, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this height adjuster is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a lower transmission spring. This lower transmission spring is an integral component needed for the self-propel or automatic drive function on outdoor power equipment. It is made of durable metal.A new lower transmission spring may be needed if the self-propel function is not working properly on a lawnmower or snow thrower. Another reason that a new lower transmission spring will be needed is if it is physically broken or damaged in any way. Sometimes the lower transmission spring needs to be replaced simply due to normal wear and tear after a long period of time and use. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This lower transmission screw is used on lawnmowers and snowthrowers manufactured by Husqvarna, Poulan, Weed Eater, and Jonsered.

This is a genuine OEM left front wheel adjuster kit that is sourced directly from the manufacturer. It is designed for use on lawn mowers and lawn tractors. The front wheel adjuster is responsible for the cutting height of the blades. The part is moved up or down to set the height for the desired lawn length. Over time, the part may become worn and will need to be replaced. If the wheel will not turn or the cutting pattern is not level, the wheel adjuster could be the cause. If the adjuster doesn't engage, it will need to be replaced.A nut driver and screwdriver are required to remove and replace this part. Removal and replacement is a relatively simple task that takes less than half an hour. Remove the spark plug before working on the machine to prevent accidental powering. Remove the old unit and install the new one. This kit is the left side front wheel adjuster. The right side wheel adjuster is sold separately. This left front wheel adjuster kit is made of metal; it is sold as a pre-assembled individual unit. This left front wheel adjuster kit is compatible with lawn tractors and lawnmowers manufactured by Craftsman, Husqvarna, and Poulan.

This grass catching bag is a genuine Husqvarna part, sold individually. This grass catching bag can be used as a replacement part for lawnmowers. This grass catching bag collects all of the grass trimmings that pass under the mower deck of the appliance so that they are swept out of the way of the operator while using the lawnmower.The grass catching bag might have to be replaced if it suffers damage that allows the grass to spill out of the bag. This could occur if the bag has been punctured, torn, ripped, or some of the material has eroded to the point that it creates a hole in the component. If this occurs, the grass catching bag should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This grass catching bag is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This is a grass catcher frame that secures the grass catcher bag to the body of the mower. Mowers are twisted, lifted, and banged constantly, so a frame may become warped beyond use. If so, this OEM manufactured part is the solution. The replacement is an easy fix and should require less than 15 minutes and doesn’t require any tools. Simply remove the grass bag from the old frame, noting how the bag fit. Slide the new frame inside the bag. It should fit snugly with no undue tautness or slack. To make certain the frame was properly introduced into the bag, attach the frame to the mower. If the frame fits securely against the cowling of the mower, then the bag and frame have been fitted properly together. This grass catcher frame was designed specifically for Husqvarna and Poulan lawnmowers, though there are also a number of Craftsmen mowers on which this frame can be installed. This OEM part is sold individually. Bag sold separately.