Parts for Ge VFD31EDSR0WW: Drum Parts

This is a ST3.5 x 12 self-tapping screw designed to secure trim, panels, and small appliance components. It replaces stripped or missing screws to restore proper fit and reduce movement or vibration. What it does:

• Fastens appliance panels, brackets, or trim where ST3.5 x 12 screws are specified
• Helps stop rattling, loose panels, or parts that shift during operation
• Provides a secure threaded hold in thin sheet metal or plastic mounting points
• Matches OEM fit where the WH02X26267 screw is specified

• Use the properly sized Phillips driver to avoid cam-out and head damage
• Start screws straight and apply steady pressure; do not over-torque to prevent stripping
• Wear eye protection when working with small fasteners and sharp edges
• Compare size and thread to ensure a proper match

Dryer door gasket creates an airtight seal to maintain proper drying temperature. Replace if torn, cracked, or causing heat loss. Verify fit with your model.

Replace a missing or corroded ground screw to restore proper electrical grounding. Prevents shock hazards and ensures safe appliance operation. Quick fix.

This is a small retaining clip used to secure a fixed line or hose inside a dryer. It snaps onto the line to hold it firmly in position against the dryer frame or panel, preventing movement during operation. Replace this clip if it is cracked, broken, or missing, which can cause internal lines to shift or disconnect.

A standard M10 hex nut used to secure M10-threaded fasteners on compatible appliances. Replaces worn or missing nuts to restore secure connections and reduce rattling or looseness. What it does:

• Secures M10 bolts or studs to hold components together
• Helps eliminate movement that can cause vibration or noise
• Restores proper fit where a damaged or missing nut caused instability
• Used anywhere an M10 nut is specified by the manufacturer

• Use the correct wrench or socket to avoid rounding the nut
• Tighten until secure—follow OEM torque specs when available
• Disconnect power and follow safety instructions when working near electrical components

A small M10 nut with an integrated gasket that secures and seals threaded appliance connections to help prevent leaks and hold fittings tight. Compact replacement for worn or damaged sealing nuts. What it does:

• Provides a sealed threaded connection between hoses or fittings and appliance ports
• Compresses the gasket to prevent water or air leaks at the joint
• Keeps fittings securely fastened to reduce vibration and loosening
• Commonly replaced when threads are corroded, gasket is crushed, or leaks are present

• One M10 nut with bonded gasket

• Disconnect power and shut off water supply before servicing
• Hand-start the nut to avoid cross-threading, then snug with the correct sized wrench
• Inspect mating threads and sealing surface; replace if damaged or corroded
• Test the connection for leaks after reassembly

Fix a noisy or wobbling dryer drum with this drum support shaft. Holds the drum wheel in place for smooth spinning and proper alignment. Simple fix.

Supports the dryer drum and allows smooth rotation. Replace if cracked, worn flat, or causing the drum to wobble. Installs on the axle at rear or front.

A small hex nut used to secure fasteners on appliances, restoring proper thread engagement and helping hold panels or components in place. Replaces a worn or missing nut to prevent loose or rattling parts. What it does:

• Secures a mating bolt or stud to keep panels, trim, or components fastened
• Restores proper thread engagement when an original nut is stripped or lost
• Helps stop vibration-related looseness and rattling noises
• Suitable wherever the OEM called out this specific nut in the parts list

• Turn off and unplug the appliance before accessing internal components
• Use the correct size wrench or socket to avoid rounding the nut
• Replace with the same style and thread engagement length specified by the OEM
• Replace the mating stud or bolt to ensure a secure fit

This flat metal washer provides a stable bearing surface for a fastener, helping distribute load and protect surfaces for reliable appliance assembly. It's a simple hardware replacement that restores proper fastening and reduces wear. What it does:

• Provides a smooth, even surface for nuts or bolts to bear against
• Distributes clamping force to prevent damage to panels or components
• Helps reduce loosening and vibration-related rattles
• Protects mating surfaces from wear and deformation

• Disconnect power and water to the appliance before accessing internal components
• Use appropriate tools; avoid over-tightening which can deform the washer or strip threads
• If corrosion or other damage is present, inspect surrounding fasteners and replace as needed

This drum baffle assembly lifts and separates laundry as the dryer drum rotates to improve tumbling and airflow for more even drying. It replaces worn or broken lifters that can cause fabric snagging or noisy operation. What it does:

• Lifts and releases clothes during tumbling to promote even drying and reduce clumping
• Helps move items through the drum so air circulates for consistent heat exposure
• Reduces rubbing and snagging from a cracked or missing lifter
• Commonly replaces a damaged or loose baffle that causes thumping, banging, or uneven drying

• Disconnect power (and gas supply for gas dryers) before servicing.
• Replacement may require partial drum removal—follow the dryer's service manual.
• Inspect mounting clips and screws; replace any damaged hardware.
• Wear gloves to protect hands from sharp sheet-metal edges.

This wire tie secures wiring and small harnesses inside the appliance to prevent rubbing, snagging, or contact with moving parts. Durable and simple to use, it keeps internal wiring neat and reduces noise from loose wires. What it does:

• Fastens and groups wires or small hoses to reduce movement and chafing
• Helps prevent electrical shorts and wear caused by rubbing against panels or components
• Keeps wiring harnesses routed away from motors, belts, and heating elements
• Can reduce vibration noise from loose wiring

• Always disconnect power to the appliance before servicing electrical components
• Thread the tie through the bundle and pull snug; trim excess tail flush with a cutter
• Do not overtighten — secure wires without pinching insulation
• Replace any brittle or damaged ties; use only as directed for wire management

This compact adjustment wrench is designed to turn and set appliance leveling legs so your appliance sits steady and balanced. It gives a simple way to raise or lower legs to reduce rocking and improve door alignment. What it does:

• Fits the hex nuts on standard appliance leveling legs to make adjustments quick and precise
• Lets you raise or lower individual legs to stabilize and level the appliance
• Helps address common symptoms like rocking, vibration, or uneven doors
• Use to fine-tune appliance height after installation or floor settling

• Disconnect power and empty the appliance if removing drawers or moving it is required for access
• Use proper lifting technique or a second person when tilting or shifting the appliance
• Adjust legs in small increments and check level after each move
• Do not force the wrench or overtighten leveling nuts to avoid damage