Echo Chainsaw Parts

This is a genuine replacement bolt that is designed for use with select trimmers and brush cutters. The metal hex screw is generally found on the starter cover and used to secure the cover to the trimmer to protect the internal engine components. Although the screw is durable, it can become damaged due to impact or another incident. It may also be lost in the process of other repairs or maintenance. It will need to be replaced with an OEM model like this screw for the best results. This 4x16 screw is manufactured by Shindaiwa and compatible with select machines from the brand, as well as those from Little Wonder and Echo. This metal screw is sold as an individual unit and does not include any additional parts or accessories. Replacing the starter cover screw is generally a simple task. Allow the engine to cool and disconnect the power supply. Then, use an Allen wrench to remove the old screw if it isn't already missing. Install the new screw and the job will be done. It is important to wear gloves and use the right size hex key to ensure that the screw doesn't get stripped during installation.

This is a genuine replacement chain tensioner that is used for select outdoor chainsaws. The chain tensioner is an assembly on chainsaws that is responsible for assisting in adjusting the tension. The included screw is installed near the bar and blade, and that screw is turned in order to increase or decrease the tension. This ensures that the tool has a taut blade that can cut properly. In some cases, this screw or other elements of the tensioner assembly can become worn or damaged. The small pins can also get lost or damaged over time, resulting in the need for a replacement. This chain tensioner kit is the ideal solution for compatible machines. This genuine OEM chain tensioner is manufactured to exact standards by Echo. It can be used in select lawn and garden equipment from Echo and Shindaiwa, including more than 150 models of saws and certain models of pruners. This tensioner includes the adjustment bolt and the tension gear/pin, and will require a screwdriver and socket set to replace. This is sold as an individual unit and does not include additional hardware or parts. Always disconnect the power supply and wear gloves when performing repairs on outdoor power equipment.

These types of nuts have a flange on one side to act as a washer. Flange nuts are often used in chainsaws because the user will not need a separate washer. They will still achieve the benefit of spreading the pressure of the connection over a larger surface area. The flange nuts also tend to stay tighter, so there is less of a risk of them becoming loose when the machine vibrates during operation. Flange nuts can last for a long time, but they may eventually need to be replaced. If they begin to corrode or they have sustained damage, they should be replaced with new nuts. In some cases, the owner might have lost one of the nuts on their machine, which will require a replacement before it can be used safely. This is an authentic OEM replacement part specifically for use with chainsaws from Echo and Shindaiwa. The flange nut is sold individually. Owners will want to make sure they are buying the correct flange nut for the job and that they have all they need.

The bevel gear may be small , but it is an important part of the chainsaw's chain tensioner mechanism. It helps to ensure that the chainsaw's tension is correct, which is important for the safety of the user and those around them. Over time, this metal piece can start to wear down. In some cases, it could start to corrode or even break. Because the part is essential for the tensioner mechanism, it is important to replace it when there is a sign of an issue or it will not be possible to get the correct tension on the chain. This is an authentic OEM bevel gear made from durable material specifically for chainsaws. The chain tension adjustment gear screw is compatible with several brands including Echo and Shindaiwa.

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

This genuine Echo retaining ring can be used as a replacement part for string trimmers, hedge trimmers, chainsaws, leaf blowers, and leaf vacuums. The function of a retaining ring for a small engine appliance is to fasten and limit the motion of a component by attaching it to a shaft or into a bore. A retaining ring can come loose and fall off, becoming lost. A retaining ring can also suffer damage over time in the form of punctures, piercings, or corrosion to the metal material that can preclude it from continuing to fasten components to shafts and bores. If this is the case, the damaged retaining ring should be immediately removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This retaining ring is compatible with the following brands: Echo, Little Wonder, and Shindaiwa.

This collar makes up part of the fuel assembly inside various types of lawn and garden equipment. The part is made of durable metal and attaches directly to the fuel tank. The collar ensures the fuel tank is protected from damage from the tool's metal screws. It also works to secure the fuel tank so the engine will power on. The collar can become damaged or worn through use and may need to be replaced.If the collar is broken, it will no longer provide protection for the fuel tank. It can also remove the tank's secure attachment to the rest of the equipment. When replacing this part, an Allen wrench or a screwdriver may be needed. Unscrew the fasteners that hold the collar onto the fuel tank to remove it from the tool. Reattach the new collar to the equipment's fuel tank.This collar is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual unit. The collar is designed to be compatible with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners manufactured by Echo, Shindaiwa, and Mantis.

This is a genuine breather cover replacement for select outdoor lawn and garden equipment engines. The breather cover, also known as a vent cover, is installed directly onto the vent tube that connects to the carburetor, ensuring that the unit can breathe while it is in use. The vent cover is a sturdy piece, but it is also exposed to a lot of vibrations and could even be affected by impact damage. Replacing it with an original part is going to ensure that your engine can vent correctly. This OEM breather cover is manufactured by Echo. It works with blowers, vacuums, trimmers, edgers, and vent-piped saws from Echo, Little Wonder, and Shindaiwa. The breather cover doesn't require any tools to install. Be sure that gloves are worn whenever doing engine work. Allow the machine to cool completely and work in a well-ventilated area at all times. Make sure that the new vent is installed properly so that the correct engine pressure is maintained and the carburetor can breathe like it should.

Most lawn and garden machines operate on fuel, typically gas or a blend of gas and oil. The system for delivering fuel to the engine relies on fuel lines with durable seals and connections. The fuel grommet on many power tools is designed for use between the fuel tank and the filter. It is meant to secure the line and ensure there is no leakage and only minimal movement. This replacement fuel grommet is designed for Echo, Shindaiwa, LIttle Wonder, and other makes and models of lawn and garden gear. This includes trimmers, pruners, chainsaws, and many other small engine machinery. This is an OEM replacement part that will ship individually and will require pliers to install. It is important to ensure that this is the appropriate size and gauge for the machine in question prior to the repair.

This is a starter grip that is used on many different types of lawn and garden equipment. The starter is the part that engages the pull rope when the user yanks on it. This causes the engine to turn quickly enough for the ignition module to make a spark. This spark is used to ignite the gasoline in the cylinder. The starter grip is made of durable plastic but can become damaged, broken, or lost. The starter grip has an important function in starting the tool while also being comfortable to use.If the starter grip needs to be replaced, a socket wrench and a screwdriver will be required. Put the tool on a flat surface and remove the spark plug wire before making the replacement. Disassemble the tool to reach the starter assembly so the grip can be removed. Replace the grip and reassemble the parts.This starter grip is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The starter grip has been designed to fit tillers, edgers, string trimmers, hedge trimmers, and leaf blowers manufactured by Mantis, Little Wonder, and Echo.

This 5 x 55 hex bolt is designed for many types of lawn and garden equipment. It is generally used to secure the muffler in place. Each bolt is made of durable metal. If the bolt snaps or becomes damaged or corroded, it will need to be replaced. Keeping a defective hex bolt installed can cause the muffler to eventually come loose.A visual inspection of the hex bolt will indicate whether it is working correctly. If it needs to be replaced, a screwdriver will be required. Place the lawn and garden equipment on a flat surface and remove the spark plug wire for safety. The bolts and any other damaged parts can be removed. Use an Allen wrench to add in the new hex bolt.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The 5 x 55 hex bolt is designed to be used with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Shindaiwa, Echo, and Mantis.

The 5x20 screw is designed for use with Echo engines. This is a standard piece of hardware that has multiple applications for securing engine components and housings depending on the exact model and type of machine. The screw can become stripped or worn over time, break off due to an incident or impact, or even get lost during other repairs. In any situation, this screw will need to be replaced as quickly as possible to prevent any further damage or issues with the operation of the equipment. This genuine OEM screw will work with select models of equipment from Echo, Shindaiwa, and Little Wonder. It can be used with over 150 trimmers, edgers, blowers, and hedge trimmers. This screw has multiple uses on various models so consult the parts diagram for exact location and replacement process. This screw requires a phillps head screwdriver for replacement. It is sold individually and includes the washer and lock washer to create a secure seal. Those who need additional screws will have to purchase multiple quantities.

This is a ball bearing that is made out of durable metal and used in a variety of lawn and garden equipment types. It fits in between a washer and a spacer in a tool to prevent excessive heat and friction between different components. The ball bearing takes the load and spins to help distribute weight while preventing friction so the tool runs at its best. When the ball or bearing retainer wears out, it can cause issues with the gardening tool. If it is located in a wheel, it can make it hard to turn.Wear is constant on ball bearings whenever a tool is in use, which means they over time they will start to experience issues and can wear out. Pressure, heat, vibration, and friction will take a toll over time. It's important to maintain the ball bearings and replace them whenever needed. This ball bearing is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. The part is designed for use with string trimmers, hedge trimmers, chainsaws, tillers, and pole pruners made by Echo, Little Wonder, Mantis, and Shindaiwa.