Echo Edger Parts

This 5 x 55 hex bolt is designed for many types of lawn and garden equipment. It is generally used to secure the muffler in place. Each bolt is made of durable metal. If the bolt snaps or becomes damaged or corroded, it will need to be replaced. Keeping a defective hex bolt installed can cause the muffler to eventually come loose.A visual inspection of the hex bolt will indicate whether it is working correctly. If it needs to be replaced, a screwdriver will be required. Place the lawn and garden equipment on a flat surface and remove the spark plug wire for safety. The bolts and any other damaged parts can be removed. Use an Allen wrench to add in the new hex bolt.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The 5 x 55 hex bolt is designed to be used with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Shindaiwa, Echo, and Mantis.

The 5x20 screw is designed for use with Echo engines. This is a standard piece of hardware that has multiple applications for securing engine components and housings depending on the exact model and type of machine. The screw can become stripped or worn over time, break off due to an incident or impact, or even get lost during other repairs. In any situation, this screw will need to be replaced as quickly as possible to prevent any further damage or issues with the operation of the equipment. This genuine OEM screw will work with select models of equipment from Echo, Shindaiwa, and Little Wonder. It can be used with over 150 trimmers, edgers, blowers, and hedge trimmers. This screw has multiple uses on various models so consult the parts diagram for exact location and replacement process. This screw requires a phillps head screwdriver for replacement. It is sold individually and includes the washer and lock washer to create a secure seal. Those who need additional screws will have to purchase multiple quantities.

This is a ball bearing that is made out of durable metal and used in a variety of lawn and garden equipment types. It fits in between a washer and a spacer in a tool to prevent excessive heat and friction between different components. The ball bearing takes the load and spins to help distribute weight while preventing friction so the tool runs at its best. When the ball or bearing retainer wears out, it can cause issues with the gardening tool. If it is located in a wheel, it can make it hard to turn.Wear is constant on ball bearings whenever a tool is in use, which means they over time they will start to experience issues and can wear out. Pressure, heat, vibration, and friction will take a toll over time. It's important to maintain the ball bearings and replace them whenever needed. This ball bearing is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. The part is designed for use with string trimmers, hedge trimmers, chainsaws, tillers, and pole pruners made by Echo, Little Wonder, Mantis, and Shindaiwa.

This ball bearing is located in the gear or fan case of different types of lawn equipment including edgers and trimmers. The ball bearing allows the clutch drum to rotate within the case while staying in a fixed position. With regular use, the ball bearings can wear down or seize up. Common signs the ball bearings need to be replaced are blades that won't work or a noisy gearcase. In either event, the machine will need to be taken apart and the ball bearings will require a replacement.Before beginning a replacement of the ball bearing, make sure to put on gloves and collect tools including a screwdriver, pliers, and a socket set. Emptying the fuel tank is recommended for safety. Remove locking nuts on the trimmer. Remove blade guard, washers, and tip guard. Remove screws on the gear case cover. Take apart all blades and gears. Use snap ring pliers to pull out the retaining ring and pull out the clutch drum. Internal snap ring pliers are used to remove the ball bearing drum to access the ball bearings. Remove old bearings and replace them with new ones before reassembly.This ball bearing is a genuine OEM replacement part. It can be used in various trimmers and edgers manufactured by Shindaiwa and Echo. The part is sold individually. For some repairs, two bearings may be required.

Piston rings help to maintain the pressure between the piston and cylinder wall. If the compressed gas between these two parts begins to leak out, the engine will not be able to put out enough energy, and the lawn appliance will stop working. Piston rings can wear out over time due to engine overheating or faulty ignition in the engine. A telltale sign of a burnt-out piston ring is whitish-grey smoke coming from the appliance. Extreme oil inefficiency is another sign. This part is a genuine OEM part designed for Echo or Mantis handheld yard tools such as a chainsaw, hedge trimmer, leaf blower, edger, pole pruner, or tiller engine. It does not ship with other parts. Any additional parts needed to install the piston ring must be ordered independently.