Echo Edger Parts

This oil seal is used in a wide selection of lawn and garden equipment. It is used to prevent dust, water, dirt, and other contaminants from reaching important parts. It also helps retain lubrication so the motor can run without any issues. If the oil seals are no longer working correctly, it can allow the oil to leak out of the tool. Topping off the oil is an option, but replacing the seal will take care of the issue for good. If there is oil leaking from a pole saw or hedge trimmer, this is an indication that new oil seals may be needed. Sockets and wrenches will be needed to handle the replacement process. Drain the oil from the engine and remove the motor to get started. Take a look at the oil seals and how they are seated for replacing the seal later. A drill or a screw can be used to remove the old seal before putting the new one in. Designed for use with Echo, Little Wonder, Mantis, and Shindaiwa string trimmers, hedge trimmers, leaf blowers, tillers, edgers, and pole saws, this component is sold individually. It is a genuine OEM part that comes directly from the manufacturer.

This is a genuine replacement bolt that is designed for use with select trimmers and brush cutters. The metal hex screw is generally found on the starter cover and used to secure the cover to the trimmer to protect the internal engine components. Although the screw is durable, it can become damaged due to impact or another incident. It may also be lost in the process of other repairs or maintenance. It will need to be replaced with an OEM model like this screw for the best results. This 4x16 screw is manufactured by Shindaiwa and compatible with select machines from the brand, as well as those from Little Wonder and Echo. This metal screw is sold as an individual unit and does not include any additional parts or accessories. Replacing the starter cover screw is generally a simple task. Allow the engine to cool and disconnect the power supply. Then, use an Allen wrench to remove the old screw if it isn't already missing. Install the new screw and the job will be done. It is important to wear gloves and use the right size hex key to ensure that the screw doesn't get stripped during installation.

This genuine Echo flywheel can be used as a replacement part for string trimmers, edgers, hedge trimmers, leaf blowers, leaf vacuums, and pole saws. The purpose of the flywheel in the small engine of such outdoor appliances is to save up the momentum generated by the combustion of the engine's fuel to maintain the rotation of the crankshaft while the engine is not actively using the fuel.A flywheel might have to be replaced in the lifespan of an outdoor appliance if it exhibits symptoms of malfunction such as frequently slipping gears, a burning smell, occasional unexplained kickback, and rattling noises coming from the brake clutch. If the flywheel exhibits any of these symptoms that are directly attributable to a malfunctioning flywheel upon inspection, the flywheel should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This flywheel is compatible with the following brands: Echo and Shindaiwa.

This is a genuine replacement chain tensioner that is used for select outdoor chainsaws. The chain tensioner is an assembly on chainsaws that is responsible for assisting in adjusting the tension. The included screw is installed near the bar and blade, and that screw is turned in order to increase or decrease the tension. This ensures that the tool has a taut blade that can cut properly. In some cases, this screw or other elements of the tensioner assembly can become worn or damaged. The small pins can also get lost or damaged over time, resulting in the need for a replacement. This chain tensioner kit is the ideal solution for compatible machines. This genuine OEM chain tensioner is manufactured to exact standards by Echo. It can be used in select lawn and garden equipment from Echo and Shindaiwa, including more than 150 models of saws and certain models of pruners. This tensioner includes the adjustment bolt and the tension gear/pin, and will require a screwdriver and socket set to replace. This is sold as an individual unit and does not include additional hardware or parts. Always disconnect the power supply and wear gloves when performing repairs on outdoor power equipment.

Many gas-powered small engines require the use of a pull cord to get the engine going. Rather than a starter, it is the pull of the cord that causes the engine to turn over and combustion to begin inside of the engine. These pull mechanisms often use a damper spring on the starter assembly. It exists to "pre-load" a recoil or pull starter with a lot of tension. When it malfunctions, it will take a tremendous amount of effort to get the engine going. This replacement damper spring is designed for a long list of Shindaiwa and Echo machines. These include trimmers, blowers, edgers, and more. This OEM replacement part is shipped individually and made of durable metal for years of service.

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

This genuine Echo retaining ring can be used as a replacement part for string trimmers, hedge trimmers, chainsaws, leaf blowers, and leaf vacuums. The function of a retaining ring for a small engine appliance is to fasten and limit the motion of a component by attaching it to a shaft or into a bore. A retaining ring can come loose and fall off, becoming lost. A retaining ring can also suffer damage over time in the form of punctures, piercings, or corrosion to the metal material that can preclude it from continuing to fasten components to shafts and bores. If this is the case, the damaged retaining ring should be immediately removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This retaining ring is compatible with the following brands: Echo, Little Wonder, and Shindaiwa.

This part is a crankcase gasket. The crankcase is the housing for the crankshaft, which is integrated into the engine block. The crankcase is split into two parts and the crankcase gasket creates a seal between the two halves.A new crankcase gasket may be needed if they are worn out or broken so there isn't a proper seal. It is recommended that the crankcase gaskets are replaced any time that the engine is serviced. This ensures that a proper seal is created when the engine is reassembled.This genuine OEM Echo part is sourced directly from the manufacturer and it is sold individually. This crankcase gasket is used on a variety of outdoor power equipment machines including hedge trimmers, leaf blowers, grass trimmers, edgers, pole saws, and brush cutters. It is compatible with outdoor power equipment that is manufactured by Shindaiwa, Echo, and Little Wonder.

A throttle return spring is a coil-shaped metal mechanism designed for use with outdoor lawn and garden power equipment such as trimmers, hedge trimmers, tillers, string trimmers, pole pruners, cultivators, pumps, reciprocating saws, regular saws, edgers, leaf blowers and vacuums, and pole saws. It is compatible for use with products manufactured by Echo, Mantis, Little Wonder, and Shindaiwa.The throttle return spring pushes the throttle closed when the user lets off the gas. A weak or failed throttle return spring is dangerous because it will prevent the throttle from easily returning to its resting position. This could pose a serious safety hazard to the person operating the machine and anyone nearby. This throttle return spring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Echo. This throttle return spring is made of metal.

This is a low speed needle that is used in many types of lawn and garden equipment. It is made of a durable metal material and installed inside the carburetor. The purpose of the low speed needle is to help control the flow of gasoline when the engine is running at low speeds. If the low speed needle is damaged or broken, it can result in stalling, smoke coming from the engine, odd sounds when speeding up, and a fluctuating idle speed.If lawn equipment is experiencing any of the issues mentioned, the low speed needle might be the culprit. Replacing a damaged low speed needle will require work gloves and a basic set of tools. First, the lawn equipment will need to be disassembled so the carburetor can be removed. The carburetor will need to be broken down to access the low speed needle. Remove the old one and replace it with a new part before using the machine again.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. It is sold as an individual component. The low speed needle is compatible with tillers, string trimmers, edgers, hedge trimmers, and pole pruners created by Echo, Little Wonder, and Mantis.

This high speed needle is made of durable metal and is located on the interior of the carburetor on many types of lawn and garden equipment with small engines. The high speed needle ensures the flow of gasoline is correct when the engine is running at high speeds. If the high speed needle is damaged or broken, it can create engine smoke, result in stalling, make odd noises as the engine speeds up, and cause a fluctuating speed when idling.If the lawn and garden equipment is having these kinds of issues, the high speed needle will need to be replaced. A basic set of tools and work gloves will be needed. The first step is to disassemble the equipment and remove the carburetor to get access to the high speed needle. Take the old component out and replace it with a new one.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual unit. The high speed needle is designed to be used with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners manufactured by Echo, Little Wonder, and Mantis.

This genuine Echlimiter cap can be used as a replacement part for string trimmers, hedge trimmers, leaf blowers, leaf vacuums, and edgers. The function of a limiter cap for such small engine appliances is to reduce harmful emissions in the effort of environmental protection. A limiter cap can be worn down and lose its essential functionality over time from general long-term usage or exposure to corrosive external materials such as dirt, debris, and pebbles. A limiter cap can be pierced, punctured, or warped to the point that it loses its efficacy in a way that is visible to the naked eye, in which case it should be replaced in order to serve its function of reducing harmful emissions from the appliance. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This limiter cap is compatible with the following brands: Echo and Little Wonder.

This genuine Echo limiter cap can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The function of a limiter cap for such outdoor appliances is to minimize the environmentally detrimental emissions from the exhausts of these appliances.A limiter cap can suffer damage from general long-term use and standard wear and tear. If the limiter cap is damaged to the point where it is visibly eroded, punctured, pierced, ripped, torn, or otherwise rendered ineffective, it should be removed and replaced as soon as possible. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This limiter cap is compatible with the following brands: Echo, Mantis, and Little Wonder.