Parts for Ge JGP3030DL3BB: Economic Nut Parts

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

This hold-down bracket secures a designated component inside your appliance, keeping it firmly anchored during use. Replace a bent, broken, or missing bracket to stop movement and rattling and restore proper alignment and a stable, factory fit. What it does:

• Anchors the specified part to the appliance frame/cabinet to prevent shifting
• Reduces vibration and rattling noises during operation
• Helps maintain correct alignment and spacing for reliable performance
• Replace if the bracket is bent, cracked, corroded, or missing

• 1 hold-down bracket

• Disconnect electrical power; for gas appliances, also shut off the gas supply
• Note the original orientation and screw locations before removal (a quick photo helps)
• Reuse existing mounting hardware unless your model specifies new fasteners
• Do not overtighten; verify the secured component is aligned and stable before restoring power

If your gas range burner won't light or clicks continuously, this igniter clip secures the ignition system. Simple DIY fix in under 15 minutes.

Burner box gasket seals the burner assembly on your gas cooktop. Replace if you notice gas odors, uneven flames, or visible wear. Confirm fit with your model.

This gas tube assembly routes gas from the valve to the right-front burner, restoring proper fuel delivery so the burner can light and maintain a steady flame. Designed as a direct replacement for the corresponding GE range cooktop connection. What it does:

• Channels gas from the control valve to the right-front burner for reliable ignition and flame control.
• Common replacement when the right-front burner fails to light or produces a weak/irregular flame.
• Helps restore correct burner operation after damage, corrosion, or a cracked/blocked tube.
• Works with the appliance's existing valve and burner components.

• One gas tube assembly (right front).

• Turn off the gas supply and electrical power to the appliance before starting any work.
• Inspect fittings and gaskets; replace any damaged seals and tighten connections to manufacturer torque recommendations.
• After installation, perform a gas leak test and verify proper ignition and flame appearance.

This gas tube assembly routes burner gas at the rear of the range, restoring proper fuel flow for baking and broiling functions. Replaces a damaged or corroded tube to help reestablish safe, even burner operation. What it does:

• Directs gas from the manifold to the rear/bake burner so the oven/broiler can ignite
• Restores burner ignition when a cracked or clogged tube prevents proper gas flow
• Helps reduce uneven baking or weak burner flame caused by leaks or blockages
• Addresses visible damage or corrosion that can interfere with safe operation

• Turn off gas supply and power to the appliance before starting work
• Use proper fittings and thread sealant rated for gas; check all connections for leaks after installation
• Do not modify the tube; replace with the correct OEM assembly to maintain safe operation

Controls incoming gas pressure for your cooktop. Replace if cracked, broken, or missing. Installs at the gas line connection point at the unit base.

Burner won't light or maintain flame? This single gas valve assembly controls fuel flow to restore proper ignition and consistent heat output.

Gas burner won't ignite or stays on? This gas cooktop valve controls gas flow to burners. Moderate DIY repair requiring basic hand tools and care.

Fix burners that won't ignite or spark continuously. This spark module controls ignition for all surface burners. DIY repair in about 45 minutes.

Fix burners that won't ignite or turn off with this gas cooktop switch harness assembly. Connects control knobs to igniters and valves. Moderate DIY.

This metal mounting bracket secures and supports internal components, helping keep assemblies aligned and stable for reliable operation. It's a direct-fit replacement designed to restore proper part positioning and reduce movement-related issues. What it does:

• Provides a fixed attachment point to hold internal parts in place
• Restores proper alignment to prevent vibration and rubbing noises
• Helps stop intermittent contact or shifting of components during operation
• Reinforces the appliance's structural connection where the original bracket is damaged or worn

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; handle the bracket carefully—edges may be sharp.
• Confirm correct bracket orientation and secure fasteners to OEM torque where specified.

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

Large burner injector for gas ranges and cooktops. Replaces cracked, worn, or missing injectors that control gas flow to the burner assembly.

This is a medium-sized surface burner base (also called an orifice holder or injector) that supports and positions the burner on the cooktop. It ensures proper gas flow and flame alignment for the burner. Replace this part if your burner sits unevenly, has an irregular flame pattern, or if the original base is cracked or damaged.

This is a surface burner base with a built-in gas injector for a cooking range. The base supports the burner cap and head while the injector meters the gas flow to produce the correct flame size. Replace this component if you experience uneven flames, difficulty igniting the burner, or if the base is cracked or corroded.

Right angle

This manifold seal is a replacement gasket that helps maintain a tight seal at the manifold connection to prevent leaks and ensure proper operation. It restores the original sealing surface for safe, reliable performance. What it does

• Seals the joint between the manifold and mating component to prevent fluid or air leakage.
• Helps stop visible leaks and the odors or performance issues that can accompany a failed seal.
• Restores proper sealing when the original gasket is cracked, flattened, or worn.
• Supports consistent pressure and flow by maintaining a tight connection.

• One manifold seal.

• Disconnect power and shut off any related supplies before beginning service.
• Inspect mating surfaces and clean away debris or old gasket material before installing the new seal.
• Replace only with the correct part number for your appliance;
• After installation, restore supplies and check the connection for leaks; if you detect a leak, shut off supply and recheck installation.

This range cord supplies main power to an electric range so the appliance can heat and run safely. It replaces a worn or damaged cord to restore reliable power connection and reduce risk of arcing or intermittent power. What it does:

• Transfers mains power from the wall outlet to the range's terminal block
• Restores a secure, stable electrical connection when the original cord is frayed or damaged
• Helps stop sparking, burning smells, or intermittent power caused by a faulty cord
• Supports normal oven and cooktop operation when the outlet and terminal connections are serviceable

• Disconnect power at the breaker before servicing; verify power is off with a meter
• Securely tighten terminal screws and route cord to avoid contact with hot surfaces

This igniter and harness assembly replaces a failed burner igniter to restore reliable ignition and safe gas flow. Ideal for ovens and ranges that fail to light or take long to ignite. What it does

• Provides the spark/heat source and wiring needed to ignite the oven/burner
• Restores ignition when burners or oven won't light or require repeated attempts
• Replaces cracked, fouled, or non-heating igniters and damaged harness connections
• Helps stop continuous clicking or failed ignition attempts caused by a bad igniter or wiring

• One igniter and harness assembly

• Disconnect electrical power and shut off gas supply before starting work
• Handle the igniter carefully; avoid touching the ceramic/filament surface
• Verify correct part fit and connector orientation before finalizing installation

ST10-16 X 7/16"

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Replacement mounting screw for securing panels, brackets, and components inside your appliance. Needed when original screws are stripped or missing.

Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.

A small machine screw used to fasten appliance panels and components. This 10-32 x 7/16 screw secures assemblies and replacement parts so panels and brackets stay properly mounted during normal operation. What it does:

• Fastens small panels, brackets, and assemblies that use a 10-32 thread
• Replaces missing or stripped mounting screws to stop rattling and loose parts
• Helps maintain proper alignment of fitted components
• Used where a short 7/16" length is required for a flush fit

• Unplug the appliance before starting any repair
• Use the correct sized screwdriver or nut driver for 10-32 threads
• Hand-start the screw to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, replace with correct fastener; avoid forcing the screw

Converts gas cooktop burners for high altitude operation. Adjusts gas pressure flow for proper performance above sea level. Replace if missing.

Convert your natural gas cooktop to propane with this LP conversion kit. Includes all necessary orifices and fittings for safe fuel type conversion.