Parts for Ge JGP3036DL4BB: Economic Nut Parts

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

This hold-down bracket secures a designated component inside your appliance, keeping it firmly anchored during use. Replace a bent, broken, or missing bracket to stop movement and rattling and restore proper alignment and a stable, factory fit. What it does:

• Anchors the specified part to the appliance frame/cabinet to prevent shifting
• Reduces vibration and rattling noises during operation
• Helps maintain correct alignment and spacing for reliable performance
• Replace if the bracket is bent, cracked, corroded, or missing

• 1 hold-down bracket

• Disconnect electrical power; for gas appliances, also shut off the gas supply
• Note the original orientation and screw locations before removal (a quick photo helps)
• Reuse existing mounting hardware unless your model specifies new fasteners
• Do not overtighten; verify the secured component is aligned and stable before restoring power

If your gas range burner won't light or clicks continuously, this igniter clip secures the ignition system. Simple DIY fix in under 15 minutes.

Seals the burner box to prevent gas leaks and maintain proper combustion. Replace if worn, cracked, or causing uneven flames. Confirm fit with your model.

This gas tube assembly routes gas to the main left-front burner so the range or cooktop lights and heats correctly. It provides a direct-fit replacement when the original gas feed tube is damaged or leaking. What it does:

• Directs fuel from the manifold to the left-front main burner for reliable ignition and flame.
• Restores proper burner operation if the original tube is bent, corroded, or leaking.
• Helps stop gas leaks at the burner feed when the existing tube is cracked or punctured.
• Works with factory fittings and mounting points for correct alignment and flame pattern.

• One gas tube assembly (main left-front) as shown.

• Turn off the gas supply and power to the appliance before beginning work.
• Inspect and replace any damaged gaskets, ferrules, or fittings; use thread sealant rated for gas if required by manufacturer.
• After installation, check all connections carefully and perform a gas leak test per local codes.

This gas tube assembly supplies gas from the regulator to the main burner, restoring proper fuel delivery for reliable ignition and even heating. Fits select gas ranges and cooktops; replaces a damaged or leaking main gas tube assembly. What it does:

• Directs gas from the regulator/valve to the main burner for normal operation
• Helps restore consistent burner ignition and steady flame when damaged
• Stops leaks or gas diversion caused by cracked, bent, or corroded tubing
• Supports correct burner alignment for even heating across the cooktop or oven

• One gas tube assembly

• Turn off the appliance, shut off the gas supply, and disconnect power before servicing
• Use proper thread sealant/approved fittings and tighten to OEM torque; check all connections
• After installation, test for leaks with a soap solution or approved leak detector—do not use an open flame

This gas tube assembly routes gas from the range's manifold to the rear-right burner so the burner can light and burn correctly. It replaces damaged or corroded tubing to restore proper gas flow to the burner. What it does:

• Directs gas from the main manifold to the rear-right burner for ignition and combustion
• Restores consistent gas flow when tubing is cracked, bent, or blocked
• Can stop symptoms like a burner that won't light, weak or uneven flames, or gas odor near the rear-right burner
• Works as the factory replacement tube for applicable gas ranges

• One gas tube assembly, main rear-right

• Turn off the gas supply and unplug the appliance before starting any work
• Use approved flare fittings or connectors and check all joints for leaks with a soapy water test after installation
• Do not modify the tube; improper installation can cause leaks or unsafe operation

This gas tube assembly routes gas from the manifold to the range/oven burner ports, restoring proper fuel flow for reliable ignition and consistent flame. Replace a bent, clogged, or leaking tube to help regain normal burner operation. What it does

• Channels gas from the main manifold to the burner(s) so burners can ignite and burn evenly
• Restores correct burner performance when a tube is cracked, clogged, or damaged
• Can stop symptoms such as burners failing to light, weak or uneven flames, or a noticeable gas odor near the range
• Works with the appliance's existing manifold, valves, and burner heads to re-establish proper gas flow

• One gas tube assembly (main, left/right) as shown

• Turn off the gas supply and unplug the appliance before beginning any service
• Use appropriate fittings and tighten to manufacturer specs—do not overtighten or force fittings
• Test all burners for proper ignition and flame pattern; check for leaks with a soapy water solution or approved gas leak detector

Controls incoming gas pressure for your cooktop. Replace if cracked, broken, or missing. Installs at the gas line connection point at the unit base.

Fixes burners that won't light or have weak flames. This gas valve control assembly regulates fuel flow to restore safe operation and reliable ignition.

This metal mounting bracket secures and supports internal components, helping keep assemblies aligned and stable for reliable operation. It's a direct-fit replacement designed to restore proper part positioning and reduce movement-related issues. What it does:

• Provides a fixed attachment point to hold internal parts in place
• Restores proper alignment to prevent vibration and rubbing noises
• Helps stop intermittent contact or shifting of components during operation
• Reinforces the appliance's structural connection where the original bracket is damaged or worn

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; handle the bracket carefully—edges may be sharp.
• Confirm correct bracket orientation and secure fasteners to OEM torque where specified.

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

Large burner injector for gas ranges and cooktops. Replaces cracked, worn, or missing injectors that control gas flow to the burner assembly.

This is a medium-sized surface burner base (also called an orifice holder or injector) that supports and positions the burner on the cooktop. It ensures proper gas flow and flame alignment for the burner. Replace this part if your burner sits unevenly, has an irregular flame pattern, or if the original base is cracked or damaged.

This is a surface burner base with a built-in gas injector for a cooking range. The base supports the burner cap and head while the injector meters the gas flow to produce the correct flame size. Replace this component if you experience uneven flames, difficulty igniting the burner, or if the base is cracked or corroded.

Right angle

This manifold seal is a rubber gasket that seals the connection between the gas manifold and oven/range components to help prevent gas leaks and ensure proper burner operation. It restores a tight seal without replacing the manifold. What it does

• Seals the joint between the gas manifold and valve or burner assembly to prevent gas leakage.
• Helps maintain correct burner ignition and consistent flame performance.
• Can address symptoms such as a gas odor near the appliance, intermittent burner lighting, or visible leaks at the manifold joint.
• Made to fit the OEM mounting interface for a direct replacement.

• One manifold seal

• Turn off the gas supply and unplug the appliance before starting any work.
• Replace only when the manifold and surrounding fittings are cool and depressurized.
• Inspect mating surfaces for damage or debris; clean before installing the new seal to ensure a proper seal.

This range cord supplies main power to an electric range so the appliance can heat and run safely. It replaces a worn or damaged cord to restore reliable power connection and reduce risk of arcing or intermittent power. What it does:

• Transfers mains power from the wall outlet to the range's terminal block
• Restores a secure, stable electrical connection when the original cord is frayed or damaged
• Helps stop sparking, burning smells, or intermittent power caused by a faulty cord
• Supports normal oven and cooktop operation when the outlet and terminal connections are serviceable

• Disconnect power at the breaker before servicing; verify power is off with a meter
• Securely tighten terminal screws and route cord to avoid contact with hot surfaces

Burner won't light or clicks continuously? This gas cooktop igniter and wiring harness assembly restores reliable ignition with a complete plug-in unit.

ST10-16 X 7/16"

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

A small machine screw used to fasten appliance panels and components. This 10-32 x 7/16 screw secures assemblies and replacement parts so panels and brackets stay properly mounted during normal operation. What it does:

• Fastens small panels, brackets, and assemblies that use a 10-32 thread
• Replaces missing or stripped mounting screws to stop rattling and loose parts
• Helps maintain proper alignment of fitted components
• Used where a short 7/16" length is required for a flush fit

• Unplug the appliance before starting any repair
• Use the correct sized screwdriver or nut driver for 10-32 threads
• Hand-start the screw to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, replace with correct fastener; avoid forcing the screw

Replacement mounting screw for securing panels, brackets, and components inside your appliance. Needed when original screws are stripped or missing.

Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.

Converts gas cooktop burners for high altitude operation. Adjusts gas pressure flow for proper performance above sea level. Replace if missing.

Convert your natural gas cooktop to propane with this LP conversion kit. Includes all necessary orifices and parts for safe fuel type conversion.