Parts for Husqvarna 917280022: Electrical Parts

An interlock switch is responsible for shutting down the engine if the equipment is running in an unsafe manner. It is a safety component that prevents the engine from starting if you aren't pressing down the brake with your foot or if the parking brake isn't in place. If the interlock switch beaks, the current will no longer reach the solenoid coil even if the brake is depressed. This will result in the engine not starting. If turning the ignition key doesn't result in the click of the solenoid, the damaged part is likely the interlock switch. The first step is to disconnect the battery and then release the steering plate. Next, remove the interlock switch under the hood and install the new one. At this point, the other parts can be reinstalled, and the lawn mower can be used. This is a genuine manufacturer-approved OEM part that is designed for Husqvarna, Ryobi, Craftsman, Dixon, Weed Eater, Murray, Ariens, and Poulan lawn mowers. This interlock switch is made with a high-quality plastic body and is sold as an individual component. A screwdriver will be required to make this replacement.

This harness light assembly is a genuine Husqvarna part, sold individually. This harness light assembly can be used as a replacement part in a lawn mower.The harness light assembly in a lawn mower might have to be replaced if the lights on the wire harness are damaged to a point that is beyond repair. If the lights are cracked, chipped, dented, punctured, eroded, warped, or otherwise damaged beyond functionality, this harness light assembly should be ordered as a genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM from the manufacturer. It is sold individually. This harness light assembly is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This fuse is a genuine Husqvarna part, sold individually. This fuse can be used as a replacement part in a lawn mower. The purpose of the fuse is to protect the lawn mower from exceeding the maximum electrical current of which the appliance is capable of withstanding.The fuse of a lawn mower can be blown, and if the fuse cannot be repaired, the component should be removed and replaced by this genuine OEM replacement part. Signs of a blown lawn mower fuse can include a punctured, torn, frayed or smeared wire. It is a simple replacement process that will require only basic tools to properly execute. Make sure to reference the appropriate manuals when conducting this replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuse is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Ryobi, and Jonsered.

This replacement part is a seat switch. It allows the user to control the settings on the seat in many kinds of lawn tractors. This ensures a comfortable user experience during any job. A new seat switch might be needed if the user is no longer able to control or adjust the seat on the lawn mower. This can be due to normal wear and tear, and it is not unusual for this part to wear out after years of use.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This part is a switch in the control system of a lawn tractor or lawnmower that activates the central electrical systems. Known as a starter switch, it is responsible for turning the power on for the mower. If the engine will not start and the electric starter does not engage, the ignition switch may be defective and needs to be replaced. To check an ignition switch, use an ohmmeter to determine if there is any connection between the S and B terminals. If no connection is detected, the ignition switch is the problem. Replacing an old or malfunctioning ignition switch on a riding mower is quick and easy. First, disconnect the battery and remove the bolt connecting it to the negative cable. Remove the ignition switch and disconnect the wire harness attached to the back. Install the new ignition switch, connect the wire harness, and then reconnect the battery. This part is compatible with specific products from popular brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. It is a genuine OEM part sourced directly from the manufacturer and is sold individually.

This key, chain, and blister pack features two keys along with a keychain with important safety tips. Keys are needed to start and operate lawn tractors and riding mowers. As with keys for other vehicles, it goes into the ignition and turns to get the engine started. Without a key, it is impossible to get the machine started to mow the lawn. Of course, keys can become lost and damaged over time. If the key is lost or does not work, owners need to get new keys that will fit their machine. Although these are generic keys, it does not mean that they will work with all makes and models of riding mower. Buyers need to be certain they are checking the makes and models that will work with these keys. These keys are genuine OEM parts. The pack includes two keys and a keychain. Having two keys ensures a spare is available in case one is lost. These keys are compatible with a range of brands including Husqvarna, Poulan, Weed Eater, Jonsered, Craftsman, and Dixon. Buyers should always double-check not just the brand, but their model to ensure the keys will work properly.

The starter solenoid, also called a starter relay, is a low-amperage relay that completes the high-amperage connection between the starter motor and the battery when the ignition key is turned. The starter solenoid is needed to engage the starter motor. When the ignition is turned on, the battery sends a small electrical charge to the starter solenoid. The solenoid shuts a switch, so a more significant amount of current is sent to the starter motor. The starter motor shaft starts to rotate and engage the teeth of the flywheel. The flywheel then turns the crankshaft to put the engine in motion. A bad solenoid can deny the flow of electricity to the starter motor and prevent engine startup. However, other underlying problems may also exist. The battery may be in good condition, but the engine is not cranking, or clicking and grinding noises may come from the solenoid. These are signs that the starter solenoid should be replaced. This starter solenoid is for use in riding lawn tractors and zero-turn riding mowers. It is compatible with specific models from different brands, including Ariens, Craftsman, Dixon, Husqvarna, Hyper Tough, Jonsered, Murray, Poulan Pro, Redmax, and Snapper. It is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower or a snowblower. The purpose of the screw in a lawn mower or a snowblower is to serve as a fastening component.The screw in a lawn mower or a snowblower might need to be replaced if the screw is chipped away, eroded, dented, punctured, or scraped at some point within the typical lifespan of the appliance. The screw can also be lost or misplaced during the operation of the appliance, in which case the screw should be replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This replacement part is a reverse module. This is a genuine replacement part made by Husqvarna. This part is used in machines that are able to drive using an engine. The reverse module is able to reverse the motion of the wheels so that the machine can drive backward. A new reverse module might be needed if the appliance struggles to switch from driving forward to driving in reverse. This can be from a malfunctioning reverse module and should be replaced if this is the case. This repair should be fairly easy. Be sure to refer to the proper user manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a seat switch found on many different lawnmowers. It is a four-pronged plug with a button on the top of the part. The inside of the button has dual sets of contacts. One of them completes the circuit between two blades, while the other focuses on the additional blades. The seat switch turns the motor off if the user leaves the seat while the deck is engaged. It is an important safety component that can prevent injuries and should be replaced if it is damaged or broken. If the seat switch is broken, it won't recognize if someone is in the seat or not and will not cut the engine power if someone leaves the seat while the motor is running. Replacing the part requires a wrench set, a screwdriver, and work gloves. Lift the seat to gain access to the seat switch. Make sure the battery is disconnected throughout the process.This is an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The seat switch is compatible with lawnmowers made by Craftsman, Husqvarna, and Poulan.