Parts for Husqvarna 917280022: Mower Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This stud fastener is a genuine Husqvarna part, sold individually. This stud fastener can be used as a replacement part for a lawn mower. The purpose of a stud fastener is to fasten components to one another with a threaded bar that attaches at its ends to make a bolt.The stud fasteners within a lawn mower might have to be replaced if one or more of them are lost, misplaced, or worn out over time. This could occur if the stud fasteners fall out of the appliance, in which case they should be immediately replaced by this genuine OEM replacement part, or if they are stripped over time from general wear and tear from long-term use. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This stud fastener is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This idler pulley is an authentic OEM replacement part sourced directly from the manufacturer. This pulley guides the drive belt on riding lawn mowers to turn the blades that cut the grass. If the pulley is not working properly, or if it seizes or is jammed, the blades will not turn to cut grass. This can happen if large objects are run over and become lodged under the deck. If the pulley comes in contact with large stationary objects like hidden rocks, it may be damaged and not work. The idler pulley will need to be replaced if the blades are not turning.Before replacing the pulley, make sure the mower is cool to touch and remove the spark plug. Ensure that the actuator is in the off position and lower the blade to make it easier to access the pulley. Wear safety gloves to prevent injury when working with the blades. Detach all retaining pins from the deck to release them from the mower. Remove the nut holding the pulley onto the shaft and then remove the pulley and install the new one. Reverse the process to reassemble the mower. This idler pulley is a solid metal part that is sold individually. It does not come with a bolt or nut. This idler pulley is designed for use in lawnmowers and lawn tractors manufactured by Husqvarna.

This part is a replacement hinge pin. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, misplace, or defective hinge pin in outdoor power equipment. A hinge pin is a removable rod that acts as a hinge. It fastens two components together while still allowing some movement. Hinge pins can break or become misplaces, necessitating replacement. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hinge pin, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this hinge pin is suitable for use on several models of small engine outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This is a genuine replacement blade for select mulching riding lawn mowers. The mower/mulch blade includes a center hole for attaching to the mandrel assembly with a bolt or nut. When secured and properly sharpened, the blade will cut the grass into fine clippings that can be left behind for mulching. Over time, this blade is subjected to regular use, repetitive motion, and potential ground contact. Other damage can also occur, such as if the mower hits a stump or a rock. In the event that the blade is warped, damaged, or dull, it needs to be replaced immediately. This genuine OEM mulching mower blade is designed for use with compatible riding lawn mowers from Poulan, Jonsered, and Husqvarna. There are more than 90 models that take this blade. This durable blade is made from high-quality metal and sold as a single unit. Hardware is not included with this purchase and will have to be purchased separately if it is required. The blade can be replaced with a wrench. Be sure to disconnect the spark plug and/or battery for safety before working on the blade or other moving parts.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

The Husqvarna outdoor power equipment shoulder bolt is an OEM replacement part that attaches to the suspension arm and wheel bracket. It is primarily utilized for securing components and providing stability in the equipment's assembly.

This part fixes the following symptoms:

• Loose or wobbly components in the equipment
• Components not staying securely in place during operation
• Excessive vibration or rattling while using the equipment
• Difficulty in attaching or securing parts due to a damaged or worn-out bolt
   

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This part is a clutch assembly that is used for riding lawnmowers and lawn tractors. A clutch is a safety device that stops the blade from spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch assembly may be needed if the lawn tractor or riding lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch assembly is a genuine Husqvarna part. It is sold individually. This particular clutch assembly is compatible with riding lawnmowers and lawn tractors that are manufactured by the Poulan, Husqvarna, and Jonsered brands.

This is a manual cable clutch for use on many different kinds of lawn tractors and riding mowers. It is the part that connects the transmission lever to the idler arm on the deck of the mower. The sole purpose of this component is to engage and then to disengage the blades. It is for a machine with a manual clutch and includes the full assembly. This means it features the spring hook, connector clips with cable sheath, and the cabling itself. It is relatively simple to replace this item and requires an appropriately sized socket set. Made of rubber, metal, and wire, it is a genuine OEM part that ships individually as an assembly. It will work with brands like Poulan, Jonsered, Weed Eater, and Husqvarna, among others.