Parts for Mantis 7222E: Engine - Air Cleaner / Muffler / Throttle Parts

The 5x20 screw is designed for use with Echo engines. This is a standard piece of hardware that has multiple applications for securing engine components and housings depending on the exact model and type of machine. The screw can become stripped or worn over time, break off due to an incident or impact, or even get lost during other repairs. In any situation, this screw will need to be replaced as quickly as possible to prevent any further damage or issues with the operation of the equipment. This genuine OEM screw will work with select models of equipment from Echo, Shindaiwa, and Little Wonder. It can be used with over 150 trimmers, edgers, blowers, and hedge trimmers. This screw has multiple uses on various models so consult the parts diagram for exact location and replacement process. This screw requires a phillps head screwdriver for replacement. It is sold individually and includes the washer and lock washer to create a secure seal. Those who need additional screws will have to purchase multiple quantities.

This OEM choke rod replacement is designed for use with select trimmer/edger models. The choke rod is installed on the unit to provide the user with access to the choke, allowing them to control the speed and fuel flow to the engine. The choke controls the engine speed and performance by restricting the flow of air to the carburetor to improve the air-fuel mixture for better performance in lower temperatures. Over time, the choke rod can become worn or it may be damaged due to impact. In either situation, a proper replacement with a part like this is necessary. This choke rod is manufactured by Echo and designed to work with a number of models from this brand and Little Wonder. There are dozens of compatible units that can take this part. The choke rod consists of the metal rod and the plastic handle and is a fairly easy part to replace. Be sure to disengage the spark plug and disconnect any power to the engine before replacing the choke rod or other engine components. This is sold as a single unit and does not include any hardware or additional parts.

This air cleaner case offers additional protection to the air filter in lawn and garden equipment, which ensures no debris or dirt makes its way into the engine where it can cause problems with performance. The air cleaner case is created of metal and fits on top of the air filter. It includes ventilation slots to let air in. Over time or through impact, the case can become damaged or broken and will need to be replaced.A visual inspection of the air cleaner case will indicate whether the part is damaged. It could have broken holding tabs, a cracked surface, or holes in the material. If any of these things are noticed, the air cleaner case should be replaced. No tools are required. Take off the old case and install the new one.This air cleaner case is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. This case is designed for use with string trimmers, tillers, hedge trimmers, edgers, and pole pruners manufactured by Echo, Little Wonder, and Mantis. This part is sold individually.

Combustion engines use carburetors to manage the amount of air and fuel entering the chamber. However, to start some combustion engines, a choke is required. This part regulates the air pressure within the intake manifold. This effectively adjustes the air and fuel levels entering the engine, and allows more fuel to reach the inside to ensure that it starts easily. The choke valve is then opened as the machine runs. The choke is installed through a grommet that ensures a good seal, but the grommet can wear out over time. This replacement choke grommet is designed for an array of small engine machines, including pruners, trimmers, saws, and edgers made by Little Wonder and Echo. This OEM replacement part is sold individually and is made of long lasting rubber. It does not include any other components in the assembly.

This replacement prevent plate is a genuine OEM part for a gas-power trimmer. A prevent plate is similar to a washer but more intense in that it also holds down a bolt with added support. The prevent plate keeps the bolt from threading all the way down to the head and helps to redistribute some of the pressure throughout the connection. This makes for a much tighter connection that is less prone to unthreading. Bolts such as this should be checked during regular maintenance, and if found to be stripped or corroded, should be replaced with a new part. To remove the old bolt, use a wrench or socket wrench to first pull out the bolt and the switch out the prevent plate. The difficulty of this job will depend where the bolt is used, as they can be found in multiple parts of the engine. This replacement prevent plate is compatible with engines made by Little Wonder and Echo. It comes sourced from the original manufacturer and includes a prevent plate and a bolt. This part ships individually as a single unit.

This genuine replacement screw is a specialty part designed for select outdoor power equipment. It is considered standard specialty hardware and can have multiple applications depending on the type of equipment and model. The durable screw is generally used to secure various components, but because of the high temperatures of the engine and the constant vibrations, it can become damaged, worn, or even broken with regular use. A replacement will be necessary to keep the machine intact and in proper working order. This genuine OEM replacement screw is manufactured to exact standards by Echo and designed for use in select outdoor power equipment from the brand, as well as equipment from Shindaiwa and Little Wonder. Over 150 machine models can use this part, including blowers, cultivators, pruners, saws, and edgers. The parts diagram will provide information on the location and application of this screw, which may have more than one use in select models. This is sold as an individual unit and those who need more than one will have to purchase multiple quantities. Always perform repairs on a cool engine and wear gloves for hand protection.

The Echo wingnut is designed as a one-piece nut with two wings that are 180 degrees apart. Each wing projects out of a round base with a flat surface. These wingnuts are commonly used in low-torque applications that require frequent or quick disassembly and adjustment. The nuts are created so you can release and tighten them using just your fingers. Wingnuts can be damaged through overuse, under-tightening, vibration, thermal expansion, and embedding into a surface. Sometimes this will result in one or both of the wings breaking off, which makes a replacement required. Rust and other debris can also build up on the wingnut and make it lose strength and durability. Replacing a wingnut is a simple process that involves removing the malfunctioning component and placing a new wingnut. This is a genuine OEM component that comes directly from the manufacturer in an individual package. It is compatible with several hedge trimmers, pole saws, and leaf blowers by Echo and Little Wonder. No additional tools or components are needed to replace a wingnut, but some individuals find a wingnut driver useful.

This air filter cover is designed to protect the air filter system from the elements. It is made from high-quality plastic to secure and protect the air filter. The air cleaner system in engines is responsible for filtering particles and debris out of the air before it enters the engine. This guarantees optimal performance and prevents damage to other internal engine parts. This filter cover can become damaged or cracked and may require replacement in order to continue to provide a secure fit. Make sure that you check the air filter while changing the cover. This replacement OEM filter cover is specifically designed for use with engines from Mantis, Echo and Little Wonder lawn and garden equipment and handheld power tools. There are dozens of compatible devices, including hedge trimmers, edgers, and other trimmers. It is made of durable, high-quality plastic, and sold individually. Please note, any required hardware is not included with this product listing and will have to be purchased separately.

This replacement air filter is used in conventional outdoor power equipment. It keeps dust, dirt, rust, grime, and other debris from entering the engine and carburetor. Extensive damage can occur if the air intake is not protected from such contaminants. Filters often become dirty, primarily when the equipment is used on a daily or regular basis. Unfortunately, this type of filter is not one that can be cleaned to ensure it performs its purpose correctly. It is advisable to order an extra one or two to keep on hand. If the air filter is already clogged or dirty, the engine may not start or may run rough. Replace it with a new one to prevent damage and to keep lawn equipment operating efficiently. This air filter works with different outdoor power equipment, including cultivators, edgers, grass trimmers, hedgers, string trimmers, leaf blowers, pole pruners, and tillers. It is compatible with specific products from Echo, Little Wonder, and Mantis. It is an OEM part sourced directly from the manufacturer and is sold individually.

The choke shutter is a trimmer part that restricts the amount of air that flows into the engine. The choke shutter rests inside the carburetor, and is designed to help with the mixture of air and fuel that causes the combustion that starts the engine.If the choke shutter is not opening or closing properly, then the engine will not be able to start. The carburetor's temperature allows the engine to run, and in order to control the temperature, you will need a working choke valve. To install a new choke shutter, start by opening the carburetor inside of the trimmer's engine. This part can be replaced with a screwdriver or bolt extractor depending on what is holding the carburetor together. The choke shutter can then be replaced and tested to make sure it opens and closes properly. This genuine OEM choke shutter is durable and easy to install. It is made from durable metal and is sold individually.

The intake gasket is designed to act as a seal between the cylinder head and the heat dam. It keeps the engine sealed and protected during use. Not only does this reduce the risk of damage to the engine on various lawn equipment units, but it eliminates potential leaks that could reduce engine power or performance and ensures maximum flow to the engine. Gaskets can become worn or damaged over time with regular use or they can break unexpectedly. This Echo gasket is made from compound material that is durable and designed to withstand the high heat inside of an engine. Use it to replace the gasket in compatible lawn equipment. This gasket is an OEM part that is designed to fit many Echo and Little Wonder lawn and garden equipment engines. There are more than 150 compatible models in total, including blowers, pumps, reciprocating saws, cultivators, edgers, and other saws. Check your user manual for compatibility and to see if there are any special replacement instructions to consider.

The insulator acts as a protective cover that secures onto the carburetor to keep it safe from the heat coming off of the engine block. The insulator is made of a durable compound material to offer the best protection possible. Through use, the insulator can crack or become damaged. This will let air get into the engine, creating lean conditions that can cause engine problems as time goes on. If this happens, the insulator will need to be replaced. This can be done by removing the air filter, draining the fuel, and removing the intake assembly. Remove the insulator from the engine before installing the new replacement insulator. Thread the mounting screws through the air cleaner case and bracket, so it fits flush against the case. Reinstall the other components before use. This is a genuine OEM insulator for Echo, Mantis, and Little Wonder trimmers, water pumps, hedge trimmers, tillers, pole saws, and edgers. It is sold as an individual component, and a screwdriver will be needed to make the replacement.

The manufacturers of Echo, Shindaiwa, and Little Wonder tools use this #5 nut at various points in more than 150 gasoline powered tools. Included among them are hedge trimmers, power saws, pruners, grass trimmers, edgers, leaf blowers, and chainsaws. The #5 nut is a lock nut, one that does not need a lock washer to prevent it from coming loose when it is used to bolt one piece of metal to another. Each of these devices has an engine housing and metal superstructures that call for metal parts to be joined together, which is were the #5 nut comes into play. As it is a small piece, and because it is used in so many places and for so many reasons, #5 nuts are often lost. Occasionally they are not tightly fastened after a repair. More often, they are simply set aside and forgotten. For this reason, it is a good idea for users to purchase several of these hardware pieces at a time. Like all our other products, this #5 nut is an OEM genuine replacement part. This means the original manufacturer machined this part or that it was built according the same specifications as the original so as to be a perfect match.

This part is a genuine replacement for Echo exhaust gaskets on select lawn and garden machines. It creates a seal between the exhaust shield and exhaust pipe. Gaskets are exposed to high temperatures and constant pressure, so they may wear down over time. They can deteriorate or become compressed, which affects the quality of the seal that they create. This could impact the engine performance in various ways. Replacing the gasket is generally the best solution. This OEM exhaust gasket is compatible with a variety of machines from Echo and Little Wonder, including blowers, pruners, cultivators, pups, drills, and reciprocating saws. Replacing gaskets requires the use of multiple tools. Gloves should be worn for hand protection and the engine should always be cool before any repairs are done. This durable gasket meets all EPA requirements and is made from durable composite material. It is sold as an individual item and those who need additional gaskets will have to purchase multiple quantities.

A spark arrestor screen, also known as a muffler screen, is a component that prevents flammable debris from reaching the engine. Through regular use, the screen can become worn and require replacement. When the screen becomes clogged, it is possible to try cleaning it. Removing it and holding it with pliers will allow the use of a torch to remove excess debris before reinstallation. When the arrestor screen becomes worn or damaged, it needs to be replaced. This may be apparent if the muffler begins to put out debris. It may also need replacement if the gardening equipment is no longer running at the correct power. The screen is located within the muffler, though it will vary depending on the model. The owner’s manual for your machine will indicate where to find the component. This spark arrestor screen is a genuine OEM replacement part that is not part of an assembly or a kit. It’s made of metal and sold on an individual basis. A screwdriver and pliers will be needed to make the replacement. The part works with hedge trimmers, pole saws, edgers, tillers, water pumps, and chippers by Echo, Little Wonder, and Shindaiwa.

The muffler gasket here is a replacement for use in various types of handheld outdoor equipment. The gasket will provide an airtight seal between the muffler and the exhaust guide on the equipment. Over time, the muffler gaskets could start to shrink and to become brittle. A bad muffler gasket could cause a noisier engine or a loss of power if air is getting into the engine. They may also crack. Any of these issues would require the gasket to be replaced. This is a genuine OEM replacement muffler gasket. It is made from durable material and is sold individually. It can work with many types of lawn and garden equipment including tillers, string trimmers, leaf blowers, edgers, pole pruners, and hedge trimmers. Brands that are compatible with the gasket include Mantis, Little Wonder, and Echo.

This OEM screw also contains a washer. This screw can be used with both a Phillips head and flat head screwdriver. These particular screws are used to fasten various parts together on outdoor power equipment machines. A replacement screw may be needed if the screw is broken, stripped, or if it has been misplaced or lost. If a screw is stripped, it will not grip the surface to which it is being placed and will be ineffective. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This genuine Echo part is sourced directly from the manufacturer and sold individually. This screw is used on outdoor power equipment machines manufactured by Echo, Little Wonder, and Shindaiwa, including blowers, edgers, grass trimmers, and hedge trimmers.