Parts for Husqvarna 968999301: Engine Assembly (22 & 24 Hp) Parts

Mower won't start or shuts off unexpectedly? This interlock safety switch ensures your riding mower starts only when safety conditions are met. Easy fix.

Replace missing or damaged wheel lug nuts on your riding mower. Secures wheels to the axle hub. Order a new lug nut if stripped, corroded, or lost.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

Hex nut for riding mowers and tractors. Secures components in place throughout the machine. Replace if stripped, corroded, or missing during repairs.

Fix a riding mower that won't start or clicks when turning the key. This starter solenoid activates the starter motor. DIY-friendly repair.

Tension spring for riding mower internal mechanisms. Secures components while allowing controlled motion. Replace if stretched, broken, or missing.

Idler pulley for riding mowers. Guides and maintains tension on drive belts. Replace if pulley is cracked, worn, seized, or causing belt slippage issues.

Control knob for riding mowers and tractors. Replaces damaged, cracked, or worn knobs on control panels. Direct fit replacement for various models.

Outlet bushing for riding mower tractors. Connects components in the discharge system. Replace if cracked, worn, or missing for proper fit and operation.

Replacement spacer for riding mower tractors. Installs between components to maintain proper alignment. Replace if broken, cracked, or missing.

Replacement fuel cap for riding mower tractors. Seals and protects the fuel tank opening. Replace if cracked, damaged, or missing to prevent leaks.

This is a tire that is designed to be used with Husqvarna lawnmowers. The tire is made out of a hard rubber and attaches to the mower's caster fork. As time goes on, the tire can experience damage and may no longer work correctly. A visual inspection of the tire will indicate if the tire has any cracks, holes, or other areas of damage. If this has occurred, the tire will need to be replaced for the lawnmower to easily move across the lawn.A wrench set, a socket set, and a nut driver may be required to replace this part. A pair of work gloves can also be used during the replacement process. The process involves removing the bolt, the nut, and the spacer that are located on the caster fork. Next, remove the tire from the wheel so the new tire can be mounted in its place. Reassemble all parts before use.This tire is an authentic OEM replacement part that is sourced directly from the manufacturer. This component is sold on an individual basis. The part is made to be compatible with lawnmowers created by Husqvarna.

Replace a missing, stripped, or corroded 5/16-18 x 3/4 bolt on your riding mower. Essential hardware for securing deck, engine, or frame components.

Metal push nut secures components on riding mower tractors. Replace if worn, damaged, or missing to restore proper fastening throughout equipment.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Tension relief linkage for riding mowers. Connects to the transmission engagement system. Replace if bent, broken, or missing to restore proper linkage.

Swivel component for riding mower tractors. Replace if worn, cracked, or broken to restore proper movement and operation. Direct fit part.

Replacement deck belt for riding mowers. Connects rotating shafts to ensure smooth cutting performance. Replace if worn, cracked, or slipping. Verify fit with your model number before ordering.

This genuine OEM part is a vertical muffler for lawnmowers. The vertical muffler is the exhaust pipe that releases the fumes from the engine. If the mower engine is overheating or not operating properly, it might mean that it's time for the muffler to be replaced. Luckily replacing this part is a simple process. To replace the muffler first make sure that the engine is not hot. Using work gloves, twist the muffler off of its attachment. If it is rusted, use a pipe wrench to unfasten the muffler from its place. Once removed, grab the new vertical muffler and twist it into place.This replacement part is sold individually and is compatible with Husqvarna lawnmowers.

Fix engine running rough, stalling, or poor performance with this riding mower intake manifold. Regulates air-fuel mixture for proper engine operation.

Replacement left colored lens for riding mower taillights. Restores proper lighting when original lens is cracked, broken, or missing. Fits various models.

Right side colored lens for riding mower light assembly. Replaces cracked, broken, or missing lens covers. Direct-fit lens for rear light housing.

Negative battery cable for riding mowers. Connects battery to chassis ground. Replace if cable is frayed, corroded, damaged, or causing poor connections.

Idler pulley for riding mowers. Connects engine components for smooth belt operation. Replace if worn, cracked, or seized to prevent belt damage.

Metal caster casting for riding mower right front wheel assembly. Replace if cracked, bent, or worn from impact damage or extended use.

Left caster casting for riding mowers and tractors. Provides structural support for front wheel assembly. Replace if casting is cracked or damaged.

Metal bracket that connects the mower deck to the lift mechanism on riding mowers. Replace if bent, broken, or worn from regular use and vibration.

Replacement bolt for riding mower and tractor assembly. Secures components together. Order when original bolt is stripped, broken, or missing.

This is a deck lift rod that is used as a replacement part for many Husqvarna riding lawnmowers. It is a durable metal rod that is designed to connect the deck and the lift controls together. This allows a user to change the height of the deck using a lift control handle or pedal. The deck lift rod is only the rod itself and does not include the pins, spring, or yoke used with it. Wear and tear can damage the part and require it to be replaced. Users may need up to four rods to replace all of them in one lawnmower.When replacing the deck lift rod, a basic set of tools and a pair of work gloves may be useful. Take the lawnmower and make sure it is turned off before placing it on a stable surface. Next, make sure the spark plug wire is disconnected so the motor does not start. Remove the original deck lift rod and install the new part.This is an authentic OEM replacement component that is directly sourced from the manufacturer. This part is sold individually. The deck lift rod is designed to be compatible with a variety of lawnmowers made by Husqvarna.

Idler pulley for riding mowers and tractors. Replaces worn, cracked, or damaged pulleys in the belt drive system. Essential for smooth operation.

Hydro pump drive belt transfers power to your riding mower's transmission system. Replace if worn, cracked, or slipping. Verify fit with model number.

This part is a clutch kit that is used for lawnmowers and lawn tractors. A clutch is a safety device that makes the blade stop spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch kit may be needed if the lawn tractor or lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch kit is a genuine Husqvarna part. It is sold individually. This particular clutch kit is compatible with lawnmowers and lawn tractors that are manufactured by the Husqvarna and Poulan brands.

Fix whining engine noise or belt slippage with a new engine pulley. Attaches to crankshaft to drive transmission belt. Moderate DIY repair for worn parts.

Replace your riding mower's headlight rim when cracked, faded, or broken to secure the headlight assembly. Verify fit using your model number.

Grey left headlight rim for riding mowers. Replace when cracked, faded, or broken to restore headlight appearance and secure lens mounting. Verify fit with your model number before ordering.

Replace your riding mower's left headlight lens when cracked, yellowed, or broken to restore visibility. Verify fit with your model number listed.

Engine won't start or runs rough when cold? A worn choke cable prevents proper starting. Straightforward DIY repair in about 30 minutes.

Fix engine starting problems or rough idling on your riding mower with this carburetor valve stem. Controls fuel and air flow for proper engine operation.

Replacement retainer clip for riding mowers. Secures internal components within the mower's mechanisms. Replace if broken, missing, or no longer clipping.

Hex screw fastener for riding mower assembly and structural connections. Replace lost, stripped, or corroded screws to secure mower components.

Replacement hex bolt for riding mowers, tillers, and snow equipment. Secures components throughout the machine. Replace if broken, stripped, or missing.

Replacement fastening nut for riding mower internal mechanisms. Secures components when used with bolts. Replace if stripped, corroded, or missing.

Prevents parts from loosening due to vibration on your riding mower. This nyloc lock nut uses a nylon collar insert to resist backing off during operation.

This linkage is a genuine Husqvarna part, sold individually. This linkage can be used as a replacement part in a lawn mower. The linkage, otherwise known as a caster yoke, in a lawn mower is a two-pronged connecting component that can serve multiple functions within the appliance.The linkage in a lawn mower can be subject to damage that can render the linkage with reduced or no functionality at some point within the typical lifespan of the appliance. This could occur if the linkage is punctured, dented, cracked, scraped, eroded, or warped to the point that it cannot serve its typical function. If this occurs, the linkage should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe use of the appliance cannot be guaranteed without the linkage in its secure position. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This linkage is compatible with the following outdoor appliance brands: Husqvarna.

Replace worn, missing, or damaged washers in your riding mower. This small fastening component reduces friction between parts during operation.

Fix loose bolts and rattling parts with this 7/16 lock washer for riding mowers and lawn tractors. Prevents hardware from vibrating loose during operation.

Replacement hex nut for riding mower tractors. Secures various components throughout the mower. Replace when stripped, corroded, or missing.

Replacement hexagon screw for riding mowers and tractors. Used to secure components throughout the machine. Replace if broken, stripped, or missing.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

Carriage bolt for riding mowers and lawn tractors. Secures deck components, blade assemblies, and frame parts. Replace when stripped, rusted, or missing.