Parts for Husqvarna 968999301: Utility Box Parts

This lug nut is a genuine Husqvarna part, sold individually. This lug nut can be used as a replacement part in a lawn mower. The purpose of the lug nut is to serve as a fastening part, in conjunction with a bolt, in any number of components within a lawn mower.The lug nut in a lawn mower is a small component that might be lost or misplaced easily, as its absence might not cause a direct effect in the operation of the appliance. However, if the lug nut is found to be missing, it should be immediately replaced by this genuine OEM replacement part. Additionally, the lug nut can suffer damage. If the lug nut is sufficiently stripped to render its function reduced or negated, it should be replaced.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lug nut is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, and Jonsered.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

This replacement part is a hex nut. It is a genuine replacement part made by Husqvarna. This part is small yet very important to the overall operation of many different appliances. Hex nuts are able to hold other parts in place and secure them so that everything can operate smoothly. A new hex nut might be needed if the current ones are damaged or missing. The repair should be fairly easy and only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This nut is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part in a lawn mower. The purpose of the spring in a lawn mower is to secure one or more components while allowing those components to have a range of motion within the internal mechanisms of the appliance.If the spring is permanently damaged, it should be removed and replaced by this genuine OEM replacement part. This replacement is a simple process that will require only basic tools to execute.This is a genuine OEM from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna.

This replacement part is an idler pulley intended for use in lawn mowers. This is a genuine replacement part made by Husqvarna. Idler pulleys connect wiring inside the machine. Idler pulleys spin as the machine is powered on and aid in moving different belts so that the appliance is able to function properly. A new idler pulley might be needed if the current one is worn down or broken in any way. It is possible that the pulley can be stripped down overtime and not function as efficiently as when brand new. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by Husqvarna.

This knob is a genuine MTD part, sold individually. This knob can be used as a replacement part in a lawnmower or an edger.The knob in a lawnmower or an edger might need to be replaced at some point within the typical lifespan of the appliance if it is faulty, damaged, or worn out from general wear and tear with long-term use. If the knob has fallen off, if pieces of it have chipped away over time, or if the knob is simply too damaged to serve its typical function, the knob should be removed and replaced by this genuine OEM replacement part. It is a very simple replacement process that will only require basic tools to properly execute.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This knob is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a bushing outlet and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is small but very important to the overall operation of many different types of machines and power appliances. Bushings help connect two different pieces of equipment and often aid in helping them work together as well as minimize friction and heat during use.A new bushing outlet might be needed if the current one is visibly damaged or missing. Because of where this part is situated it is possible for the bushing to become stripped or damaged overtime and it is not unusually replaced. If there are parts of the machine that are creating unusual noises, it might be time to replace the bushing. This bushing outlet is a genuine OEM replacement part. This part is sold individually and is sourced from the manufacturer.

This part is a replacement spacer. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current spacer is broken or in any way damaged, this part can be used as a replacement. It is intended for use with lawn tractors.This spacer is fitted into the lawn tractor's tires to help fill the gap within the tire axle. This ensures that the wheel can rotate smoothly. Proper tools are required to install this part, including a wrench set, hammer, and punch. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this spacer, the appropriate owner's manual and equipment diagrams should be referred to. This spacer is suitable for use on a variety of lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This fuel cap is a genuine Husqvarna part, sold individually. This fuel cap can be used as a replacement part in a lawn mower. The purpose of the fuel cap in a lawn mower is to protect and cover the fuel line and the fuel tank.The fuel cap in a lawn mower should be immediately replaced if it shows signs of damage. Damage to a fuel cap can take the form of puncturing, tearing, ripping, denting, warping, or eroding to the point of exposing the internal mechanisms of the appliance to the elements. If this occurs, the fuel cap should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This fuel cap is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This is a tire that is designed to be used with Husqvarna lawnmowers. The tire is made out of a hard rubber and attaches to the mower's caster fork. As time goes on, the tire can experience damage and may no longer work correctly. A visual inspection of the tire will indicate if the tire has any cracks, holes, or other areas of damage. If this has occurred, the tire will need to be replaced for the lawnmower to easily move across the lawn.A wrench set, a socket set, and a nut driver may be required to replace this part. A pair of work gloves can also be used during the replacement process. The process involves removing the bolt, the nut, and the spacer that are located on the caster fork. Next, remove the tire from the wheel so the new tire can be mounted in its place. Reassemble all parts before use.This tire is an authentic OEM replacement part that is sourced directly from the manufacturer. This component is sold on an individual basis. The part is made to be compatible with lawnmowers created by Husqvarna.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This replacement part is a deck belt intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Deck belts link various rotating shafts to ensure that the entire machine is running smoothly and efficiently. A new deck belt might be needed if the current one is damaged or broken in any way such as being split or torn. The user might be able to tell when the deck belts are malfunctioning if there are noises coming from the machine that are not typical. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This genuine OEM part is a vertical muffler for lawnmowers. The vertical muffler is the exhaust pipe that releases the fumes from the engine. If the mower engine is overheating or not operating properly, it might mean that it's time for the muffler to be replaced. Luckily replacing this part is a simple process. To replace the muffler first make sure that the engine is not hot. Using work gloves, twist the muffler off of its attachment. If it is rusted, use a pipe wrench to unfasten the muffler from its place. Once removed, grab the new vertical muffler and twist it into place.This replacement part is sold individually and is compatible with Husqvarna lawnmowers.

This is a listing for an OEM intake manifold that is designed for use on outdoor power equipment engines. The intake manifold is responsible for regulating the air and gas flow into the engine and ensuring the proper engine operation. If the manifold is damaged or broken, it could lead to issues with the engine running like it should. This part includes several moving components that help distribute the combustible mixture and they can become damaged due to the constant vibrations and heat of the unit. If the intake manifold is damaged, the engine could fail completely. It will be important to replace the part as soon as issues are noticed with a genuine OEM model like this one. This intake manifold is compatible with select Briggs & Stratton engines and power equipment that contains them. It is also compatible with select models from Husqvarna. This manifold is made of durable metal materials and is sold as an individual component. Hardware and additional parts will require a separate purchase. It is important to work in a well-ventilated area and allow the engine to cool before doing any repairs.

This replacement part is an idler pulley. This is a genuine replacement part made by Husqvarna. An idler pulley is a common part that is able to assist in many engines running smoothly and efficiently. Pulleys are responsible for connecting parts together to allow for the engine to run smoothly.A new pulley might be needed if the current one is damaged in any way. If the current one is stripped down, it should be replaced immediately. This is typically due to the amount of friction that a pulley experiences over time. Be sure to wear work gloves during this repair as objects can easily cause injury. Refer to the proper user manual before beginning this repair. This part is sold individually and is sourced directly from the manufacturer. This pulley is also a genuine OEM replacement part to ensure proper fit.

This right caster casting is a genuine Husqvarna part, sold individually. A right caster casting can be used as a replacement part in a lawn mower. This genuine OEM part is made out of high quality, durable metal material that is meant to last the full lifespan of a lawn mower.The right caster casting in a lawn mower might be subject to an eventual replacement that could be necessitated due to general wear and tear over long-term use or after an accidental collision with a hard object. If this is the case, the right caster casting should be removed and replaced by this genuine OEM replacement part as soon as possible. Refer to the manual for detailed instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This right caster casting is compatible with the following outdoor appliance brands: Husqvarna.

This genuine OEM replacement part is a deck lift connector for riding lawnmowers. The deck lift connector, also known as the deck lift bracket, is the small metal bracket that attaches the mower deck to the lawnmower. Over time, a deck lift connector can deteriorate due to excessive wear and tear making it incapable of adequately hold the the mower deck. If the mower's deck is dragging, or there is the deck lift connector is visibility damaged or compromised, it will need to be replaced. Luckily, replacing this part is a relatively simple process. To replace the lift connector, start by locating the old one above the mower deck. Unfasten the bolts that hold it to the lawnmower, and remove the old bracket. Once removed replace it with the new one making sure that it is securely fastened. This replacement part is sold individually and is compatible with Husqvarna riding mowers.

This part is a replacement bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or lost bolt in outdoor power equipment. Bolts are a standard piece of hardware that can be used to securely fix together different equipment components. They should be replaced if corroded, lost, stripped, or otherwise ineffective. When working on or near an engine, it is important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bolt, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this bolt is suitable for use on several different models of outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This is a deck lift rod that is used as a replacement part for many Husqvarna riding lawnmowers. It is a durable metal rod that is designed to connect the deck and the lift controls together. This allows a user to change the height of the deck using a lift control handle or pedal. The deck lift rod is only the rod itself and does not include the pins, spring, or yoke used with it. Wear and tear can damage the part and require it to be replaced. Users may need up to four rods to replace all of them in one lawnmower.When replacing the deck lift rod, a basic set of tools and a pair of work gloves may be useful. Take the lawnmower and make sure it is turned off before placing it on a stable surface. Next, make sure the spark plug wire is disconnected so the motor does not start. Remove the original deck lift rod and install the new part.This is an authentic OEM replacement component that is directly sourced from the manufacturer. This part is sold individually. The deck lift rod is designed to be compatible with a variety of lawnmowers made by Husqvarna.

This part is a clutch kit that is used for lawnmowers and lawn tractors. A clutch is a safety device that makes the blade stop spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch kit may be needed if the lawn tractor or lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch kit is a genuine Husqvarna part. It is sold individually. This particular clutch kit is compatible with lawnmowers and lawn tractors that are manufactured by the Husqvarna and Poulan brands.

This is a replacement engine pulley. Attached to the engine crankshaft, the engine pulley drives the transmission belt of the lawn tractor. Engine pulleys can become worn and damaged with repeated use. A warning sign that damage is occurring may be a whining noise coming from the engine. A worn and damaged engine pulley can lead the belt positioned on it to wear or break, as well. To install a new engine pulley, after removing the old pulley, place a lock washer topped by a flat washer onto the engine pulley bolt. Then place the engine pulley bolt into the engine pulley's center hole from the larger pulley's side. A spacer washer is then placed on the engine pulley bolt, located on the small pulley side. The rounded side of the spacer should face up. Using a socket wrench, install the pulley till it is tight on the lawn tractor. Consult the owner's manual to find the ideal torque rating. This engine pulley is an OEM part sourced directly from the manufacturer. This pulley is designed as a replacement for the engine pulley in Poulan, Redmax, Poulan Pro, Weed Eater, McCulloch, Craftsman, Jonsered, AYP, and Husqvarna lawn tractors. The engine pulley is sold individually.

This valve stem is a genuine Husqvarna part, sold individually. This valve stem can be used as a replacement part in a lawn mower or an edger. The purpose of the valve stem in a lawn mower or an edger is to allow the flow of fuel and air into the carburetor of the appliance so that it can be mixed in the proper ratio to feed to the spark plugs and ignite the engine.The valve stem in a lawn mower or an edger should be replaced if the valve stem has been damaged. This could occur if the valve stem is punctured, dented, torn, scraped, warped, or eroded to the point that it cannot serve its usual function of sealing and opening up the combustion chamber of the appliance. If this occurs, the valve stem should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This valve stem is compatible with the following outdoor appliance brands: Husqvarna.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a lawn mower. The purpose of the retainer in a lawn mower is to secure one or more components within the internal mechanisms of the appliance through the process of clipping.The retainer in a lawn mower might need to be replaced if the component can no longer serve its typical function as a fastening component of the appliance. If the retainer is dented, punctured, warped, eroded, cracked, or otherwise damaged to the point of reduced or no functionality, the retainer should be removed and replaced by this genuine OEM replacement part. It is a simple replacement process that will require only basic tools to execute properly. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna.

This part is a replacement hex bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or misplaced hex bolt in several types of power equipment.The hex bolt gets its name from its hexagon shape and is a standard piece of hardware with many different uses. Bolts are important for securely holding equipment together but can become stripped, corroded, lost, or otherwise defective over time, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This hex bolt can be used with small engine power equipment that has been manufactured by Husqvarna, Poulan, and other brands. Sold individually.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower. The purpose of the nut in a lawn mower is to serve as a fastening component within the internal mechanisms of the appliance, in conjunction with a bolt, to keep one or more components in their stable placement.The nut in a lawn mower might be subject to damage during the typical lifespan of the appliance that could render the nut beyond functionality. The nut can also be easily lost or misplaced during the lifespan of the appliance as it is a small component that can disappear without necessarily notifying the user of the appliance of its absence. If the nut is lost, misplaced, or sufficiently damaged to the point of reduced or no functionality, the nut should be replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This nut is compatible with products from Husqvarna.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This linkage is a genuine Husqvarna part, sold individually. This linkage can be used as a replacement part in a lawn mower. The linkage, otherwise known as a caster yoke, in a lawn mower is a two-pronged connecting component that can serve multiple functions within the appliance.The linkage in a lawn mower can be subject to damage that can render the linkage with reduced or no functionality at some point within the typical lifespan of the appliance. This could occur if the linkage is punctured, dented, cracked, scraped, eroded, or warped to the point that it cannot serve its typical function. If this occurs, the linkage should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe use of the appliance cannot be guaranteed without the linkage in its secure position. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This linkage is compatible with the following outdoor appliance brands: Husqvarna.

This washer is a genuine Husqvarna part, sold individually. This washer can be used as a replacement part in a lawn mower. The purpose of the washer in a lawn mower is to serve as a small fastening component that can reduce the friction between two or more components.The washer in a lawn mower can be easily lost or misplaced during the operation of the appliance as it is a particularly small component that can go missing without alerting the operator of its absence. If this occurs, the washer should be replaced by this genuine OEM replacement part. Additionally, the washer can be subject to stripping over time, in which case it should also be immediately replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This washer is compatible with the following outdoor appliance brands: Husqvarna and Dixon.

This part is a replacement hex nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or misplaced hex nut in lawn tractors.This hex nut is a standard piece of hardware and thus has multiple different uses. The nut gets its name from its hexagonal shape. It can be used to properly secure or fasten various components in the equipment. This part is subject to wear and tear or corrosion, and can also be easily lost, thus requiring replacement. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex nut, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this hex nut is suitable for use on several models of lawn tractors and other outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This part is a replacement hexagon screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current hexagon screw is broken, misplaced, or in any way damaged, this part can be used as a replacement. It is intended for use with outdoor power equipment.Hexagon screws are a standard piece of hardware that get their name from the hexagonal shape of the screw head. They have multiple different uses. Screws are critical for properly securing parts of the equipment, and may require replacing if stripped, corroded, lost, or otherwise defective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this hexagon screw, the appropriate owner's manual and equipment diagrams should be referred to. This hexagon screw is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. This part is sold individually.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.