Need Help?
Call or text
Show parts
A primer bulb is a small rubber button-like component. This essential part pulls fuel through the fuel line and helps fill the carburetor with the right amount of fuel. Pressing the primer bulb will start the fuel flow and combustion. The primer bulb makes starting the engine easier, and without it, undue stress will be placed on the carburetor. There should be a slight resistance when pushing it and it should pop back out after depressing it. If the primer bulb is cracked or is not creating proper suction, replacement is necessary. The rubber material will eventually harden and crack over time. Stale fuel can also cause primer bulb deterioration. To replace a primer bulb, it is best to consult the equipment's manual for diagrams that show the bulb's placement. This is an OEM part made from high-quality material and is manufacturer-approved for use as a replacement. It can be used in lawn maintenance equipment such as string trimmers, leaf blowers, chainsaws, and pole pruners from brands like Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.
Usually ships within 4 - 14 days
This replacement part includes one fuel cap assembly and is compatible with specific models of gas-powered blowers and trimmers. This part is made of high-quality plastic. It consists of a black cap that is approximately 2 inches in diameter with a retainer connection to keep the cap from falling on the ground. The cap is meant to cover the fuel tank's fill nozzle. Replacing a lost, leaky, or damaged cap won't require any tools. This original OEM part is designed to deliver a perfect fit for compatible equipment. It is compatible with outdoor power equipment from Craftsman, Husqvarna, Poulan, and Weed Eater. This replacement part is sold individually.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.
Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.
Symptoms of a bad Fuel Line include:
This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.
This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.
This part is discontinued by the manufacturer and is no longer available for purchase.
This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.
This is a genuine carburetor screw that is designed to replace missing or broken screws in certain lawn and garden equipment engines. On select models of small engines, there are two carburetor screws that are used to secure the carburetor to the rest of the engine assembly. These screws are made of durable material, but also constantly exposed to high heat and constant vibrations. They may become worn, damaged, or even snap off entirely as a result. They sometimes also get lost in the process of other repairs and will need to be replaced. This genuine OEM part will offer the solution for compatible engines. This OEM carburetor screw is compatible with hedge trimmers, edger/trimmer models, and blowers that use the appropriate engine. There are over 150 models that take this carburetor screw, including those from Husqvarna, Paramount, Weed Eater, Jonsered, and Poulan. This durable screw is sold as a single unit and features a hex socket head, so be sure to have the proper tool for installation. Those who need to replace both screws will have to purchase two separately. Be sure to allow the engine to cool completely and wear gloves whenever replacing screws or performing other engine repairs.
This genuine Husqvarna filter holder can be used as a replacement part for string trimmers. The function of a filter holder, otherwise known as an air box, is to take in external air flow and channel it through a network of valves into the cylinder of the engine, which is where the fuel combusts and ignites the spark plugs.A filter holder might have to be replaced if it shows symptoms of disrepair or malfunction that prevent it from transferring air flow into the cylinder. These symptoms of damage could include an engine that won't start or misfires frequently, reduced fuel economy, or block smoke pouring out of the exhaust. Though these symptoms are not necessarily directly attributable to the filter holder, if a visual inspection shows that a damaged filter holder is indeed responsible, it should be replaced immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This filter holder is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.
This replacement part is a carburetor assembly. This is a genuine replacement part made by Husqvarna. The carburetor is able to mix fuel with oxygen so that the engine is able to run smoothly during use. A new carburetor might be needed if the current one is not working properly. If the user hears unusual noises coming from inside the machine, it might be best to replace this part. If the engine is unable to start properly, it can be due to a faulty carburetor. Be sure the engine is shut down before attempting to replace this part. It is also recommended that work gloves be used to ensure safety during the repair or replacement. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.
This is a reed valve found in many types of lawn and garden equipment. The reed valve is a single-direction valve that is located near the inlet port. This component lets a mixture of fuel and air into the crankcase while preventing it from coming back out of the same part. A reed valve moves from open to closed and back again based on the level of pressure within lawn equipment. Over time, the reed valve can experience issues like chipping, breaking, loosening, or bending. When these things happen, the valve reed will need to be replaced.To access the reed valve, remove the rear cover of the machine. The carburetor must also be removed to get access to the reed assembly. Take the reed valve out of the mounting assembly and install a new replacement part.This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual component. The reed valve is used with string trimmers, pole pruners, and leaf blowers manufactured by Craftsman, Husqvarna, Paramount, Poulan, Poulan Pro, and Weed Eater.
This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in string trimmers, hedge trimmers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might need to be replaced if the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is dented, cracked, pierced, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part. If the screw is lost, it should be replaced as well. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.
This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.
This genuine Husqvarna rope kit can be used as a replacement part for the small engine of string trimmers. A rope kit works alongside the starter handle to facilitate the recoil starting mechanism in a string trimmer. This is the mechanism by which the string trimmer is turned on; the rope is looped around a pulley and the rope is pulled and coiled off of the pulley in order to power the engine.A rope might have to be replaced by this rope kit if it shows visible signs of wear and tear that affects its ability to start the engine. If a rope looks like it is fraying or has worn out over time from exposure or general long-term usage, the rope should be removed and replaced with this genuine OEM replacement part before using the string trimmer again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This rope kit is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.
This baffle plate is a genuine Husqvarna part, sold individually. This baffle plate can be used as a replacement part in a string trimmer of a pole pruner. The purpose of the baffle plate in a string trimmer or a pole pruner is to control and regulate the amount of heat that is retained within the appliance.If the baffle plate shows signs of damage or reduced efficacy, the baffle plate should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance by its operator.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This baffle plate is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.
This is a starter pulley used in trimmers and pruners. The starter pulley protects and encloses the starter rope. It includes a metal screw that is used to keep the rope in place while inside of the pulley. If the pulley is damaged, becomes cracked, or is lost, it can cause a malfunction and the rope may jam inside of the tool. When this occurs, the part will need to be replaced.Removed the starter to inspect the pulley for damage. The pulley should be replaced if needed. To replace the starter pulley, pull out the starter rope and use a screwdriver to secure the pulley and recoil spring. Remove the rope and screwdriver before releasing tension on the spring by rotating it. Next, take out the original pulley and replace all the other components.This starter pulley is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is used with pole pruners and string trimmers manufactured by Craftsman, Poulan, Poulan Pro, and Weed Eater.
This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
This is a fan housing that is used for a range of trimmers from popular manufacturers. The fan housing plays an important role in helping to keep the trimmer safe and operational. It will protect the fan from outside elements that would otherwise cause serious damage to it. If the housing is not working properly, it could start to fall off. It will need to be replaced.The fan housing is made from durable material, but it could be damaged due to accidental mishaps that occur when the trimmer is in use. It could also be damaged when in storage if something falls onto it and cracks it, for example. Regardless, the housing will need to be replaced to ensure safety for the internal fan on the trimmer. Owners should be able to make the replacement easily.This fan housing will work with select trimmers from Poulan, Craftsman, and Husqvarna. The housing is a genuine OEM replacement part that has been sourced from the original manufacturer. It is sold individually.
This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.
This is a high-quality muffler attachment spring used in blowers and trimmers. The muffler attachment spring is made of durable metal. It is responsible for ensuring the muffler stays in the correct location. The component also prevents excessive vibration when using the equipment. Sometimes the muffler attachment spring can become damaged, experience corrosion, or break. If this occurs, the component will need to be replaced.If the muffler attachment spring is broken or damaged, it may not properly hold the muffler in place. This can be dangerous and create other issues and needed repairs. Before making the replacement, turn off the lawn or garden tool and place it on a flat surface. The spark plug wire should be disconnected before starting the replacement process. Basic tools and work gloves may be needed to make the replacement.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as an individual part. The muffler attachment spring is used in string trimmers, leaf blowers, and pole pruners manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.