Parts for Craftsman 41AD526C799: Engine Parts

This replacement part is a cylinder assembly. This is a genuine replacement part made by MTD. This part is commonly found working with engines and ensures that everything runs smoothly during use. A new cylinder assembly might be needed if the current one is damaged in any way. If the engine is struggling to power on, it could likely be an issue with the cylinder assembly. This part might need to be replaced after years of normal use. Be sure the engine is powered off before repairing this part. Work gloves are also recommended when working near or around the engine. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This part is a replacement piston ring kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace broken or defective piston rings in a variety of line trimmer models. The piston rings are important as they seal the gap in between the cylinders and pistons to prevent leaks. Piston rings are subject to wear and tear and thus should be replaced with regularity. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this piston ring kit, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this piston ring kit is suitable for use on several different models of line trimmer manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement engine cylinder O-ring. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or worn engine cylinder O-ring in a variety of line trimmer models. The engine cylinder O-ring forms a seal in between the engine cylinder itself and the engine's crankcase. O-rings are subject to wear and tear, which can cause them to become brittle, worn, or broken, requiring replacement. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this engine cylinder O-ring, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this engine cylinder O-ring is suitable for use on line trimmers manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This breather hose is a component that makes up part of the ventilation system for the crankcase with lawn and garden tools. It has a single way valve that prevents excess exhaust gases from transferring to the engine. A reed is included to help lubricate the piston as the hose moves oil to the crankcase. The tube is made with special fibers that filter and cool the air to prevent the engine from overheating.If oil is leaking from lawn and garden equipment, this can indicate that the breather hose needs to be cleaned or has been damaged. If it is dirty, it will often create blue smoke that leaves the exhaust pipe. If the smoke is dark, this is a sign that the breather hose may be damaged and need replacement. Inspect the hose to see if it looks dirty or damaged so a replacement can be made if needed.This breather hose is an OEM replacement component directly sourced from the manufacturer. It is a single individual hose. The breather tube can be used with lawnmowers, tillers, string trimmers, edgers, and leaf blowers by Yard-Man, Craftsman, Cub Cadet, Bolens, Ryobi, Troy-Bilt, Murray, MTD, and Yard Machines.

This replacement part is an oil plug ring. It is a genuine replacement part made by MTD. This specific part is typically found in machines and appliances that have an oil tank. This ring is used to make sure that the oil from the machine does not escape during use.A new oil plug ring might be needed if the current one is allowing oil to escape from the tank. If there are oil drips near the engine it is possible that the ring is damaged or broken. This part is small but important to the overall use of many machines. Be sure to reference the specific user manual for more information on how to replace this part. This part is sold individually. It is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.

This part is a replacement lead wire kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective lead wire in line trimmers.Lead wires are critical for the line trimmer to work as they connect the electrical system required to power the equipment. Wires can become stripped, broken, stretched, or otherwise defective over time and thus will require replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Take caution when working with electrical wiring. For more accurate information on how and where to install these lead wires, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. These lead wires can be used with different models of line trimmers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This replacement part is an ignition coil. This is a genuine replacement part made by MTD. This part is commonly found in line trimmers or edgers. This part ensures that the trimmer is able to start and stop according to the user's needs.A new ignition coil might be needed if the starting and stopping functions in the line trimmer are not working as effectively as during prior uses. This can be due to a faulty ignition coil, and if this is the case, it should be replaced. Be sure the engine is completely turned off before attempting to replace this part. Refer to the proper user manual for more information on this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for outdoor appliances with small engines such as string trimmers and leaf blowers. This spark plug provides an ignition source for the engine.The spark plug might have to be replaced at some point in the standard lifespan of the appliance if it suffers enough damage to render it useless. The spark plug might be cracked, punctured, or eroded enough to reduce its functionality. If this occurs, the spark plug should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: MTD and Craftsman.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This is a replacement carburetor for use with several types of handheld lawn and garden equipment. The carburetor is the part of the machine that is responsible for mixing the air and fuel in the right ratio before it goes into the engine. Over time, the carburetor may start to have problems. When this happens, it will mean that there is not a correct fuel and air ratio. The engine can have trouble starting, running, and it will often stall. This could be because a part of the carburetor has worn down or broken. To test the carburetor, users can remove the air filter. Then, add a teaspoon of fuel to the carb and start the engine. If it starts and then dies quickly, the carburetor could be the problem. This carburetor is a genuine OEM replacement part. It is sold individually and comes with the fuel lines and the primer bulb. It can work for many models of string trimmers and edgers. Compatible brands include MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

This is a genuine replacement O-ring, which is a standard part on a number of engines. This O-ring is specifically designed as a replacement for the one found in the carburetor on select lawn and garden engines. The O-ring is designed to create a seal in the carburetor to ensure optimal performance and prevent leaks. It is also designed to help create the right amount of pressure. Over time, O-rings can become corroded, worn, or damaged due to their exposure to pressure and high heat. If they become broken or damaged, they can result in poor engine performance or even total engine failure. This genuine OEM O-ring is manufactured by RYOBI and compatible with a number of tillers, trimmers, and blowers from this brand. It is also designed for use with select models from Bolens, Yard Man, MTD, and Troy-Bilt. There are more than 150 models that can use this specific O-ring. It is made of durable materials and sold as an individual unit. Keep in mind that because O-rings have multiple applications and engines may have more than one type, it is important to double-check the location and application of the part to ensure the right one is being used.

The air filter sifts out particles and debris as air enters the engine of the mower. In small equipment engines, air filters can help provide optimal performance of the engine. The filter is made of durable foam and is rectangular in shape and is sold as a single unit. Over time, they can become clogged with debris and particles and may require replacement as a part of regular maintenance. This MTD air filter replacement will keep equipment running better and releasing fewer emissions. Before installing, soak the filter in oil and then remove the excess. The oil will help catch more debris than a dry filter would and provide more protection for the engine. This filter is made to exact OEM standards and is designed for use on select gas-powered blowers and trimmers made by MTD, Troy-Bilt, and Cub Cadet.

The plastic fuel tank is responsible for storing the fuel that will be used by the lawn and garden equipment. The fuel tank is meant to be durable. However, this does not mean that it can't become broken. Damage to the fuel tank could cause a leak, which could be dangerous and waste fuel. Whether it is through wear and tear or an accident that causes a problem with the gas tank, such as a hole, it will need to be replaced. This is a genuine OEM replacement fuel tank that will work with string trimmers, edgers, and leaf blowers. It is compatible with models from Craftsman, MTD, Cub Cadet, and Troy-Bilt. It is important to note that this product is sold individually. It does not come with the fuel cap that will be needed to keep the fuel tank safe from an influx of air and debris. The cap will need to be purchased separately. Buyers should always make sure the tank they are choosing will work with their make and model.

This is a fuel cap. It keeps fuel from leaking or spilling, and slows fuel evaporation when a machine is sitting for long periods. The fuel lid can be cracked or otherwise damaged, or it can become lost when removed for refilling. For the safety of the operator, a missing or broken fuel cap should be replaced immediately.Replacing a fuel cap is simple. If there is an existing cap, remove it first by turning it counterclockwise. Install the new fuel cap by matching up the unit's threads and twisting it clockwise until secure. Wear gloves when working with fuel caps.This fuel cap is a genuine OEM part. It is made of high-quality, durable materials. The cap is sold as an individual piece. The fuel cap can be used with MTD, Cub Cadet, and Troy-Bilt machines. It is compatible with blowers, cultivators, edgers, trimmers, and other lawn and garden equipment.

This fuel tank support is a genuine MTD part, sold individually. A fuel tank support can be used as a replacement part for outdoor appliances including tillers, string trimmers, leaf blowers, and edgers. This genuine OEM part is made out of high quality, durable materials that are specifically designed to last and hold up to possible general wear and tear over long-term usage.The fuel tank support might be subject to various forms of damage that can reduce or negate the efficacy of its function. If this occurs, the fuel tank support should be removed and replaced by this genuine OEM replacement part in order to guarantee safe continued usage of the appliance over its typical lifespan.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuel tank support is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

This starter rope is made for use with many types of lawn and garden equipment, such as string trimmers and leaf blowers. The rope wraps around the starter pulley and can be pulled manually to cause the engine to start running. With wear and tear through use, the starter rope can start to fray. If the rope isn't replaced when fraying, it can also break and render the equipment no longer usable until a replacement part has been installed.The most common symptom of a broken or worn starter rope is an issue when trying to start the engine. The rope will be pulled, and the rope will keep coming out of the machine instead of turning on the engine. Before replacing the starter rope, remove the spark plug wire to prevent the engine from starting. The starter rope can be removed and a new component installed in its place.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as a single starter pull rope. This rope is made for use with string trimmers, leaf blowers, snowblowers, lawnmowers, and tillers created by MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Bolens, Troy-Bilt, Ryobi, and Yard-Man.

This recoil spring is used as part of the starting mechanism for gasoline power tools such as cultivators, leaf trimmers, edgers, power vacuums, and blowers. These devices do not use battery-powered starters and thus must rely on magneto armatures and rope pulls. The recoil spring is attached to the rope pull and returns the rope to its proper place after being pulled. The coil spring receives a tremendous amount of torque again and again over time, and through aging and stretching, the spring will become inoperable and need to be replaced. Signs the recoil spring has weakened include a slackened pull from the starter rope that does not allow the engine to start or an absolutely slack pull rope. Replacing the recoil spring is a matter of detaching the pull rope and removing the starter housing. Remember to wind the pull rope around the new coil spring to allow the proper amount and length of rope. It will have to be steadied in place as the starter housing is refastened. Always use a genuine OEM replacement part, such as this one, in order to get parts that are identical to the originals. The coil is compatible with tools branded by Cub Cadet, Yard-Man, Ryobi, Bolens, MTD, and Yard Machines.

This replacement part is a rope guide, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This rope guide allows the user to pull start the engine. The rope is connected to the transmission inside the engine that allows it to be turned off and on when desired. A new rope guide might be needed if the current one is damaged or missing. If the user is unable to start the lawn mower, then the rope guide might not be connected and should be replaced. Be sure that the engine is completely powered off while attempting this repair as this part is close to the engine inside the appliance. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer to ensure proper fit in all appliances. Reference the owner's manual for more specific guidance.

Outdoor machines such as tillers and trimmers use gas-powered engines to run. These systems will have to idle without also allowing the machine to move or function. This is done through the use of a clutch that rotates the drum when the throttle on the machine is triggered or increased. When the operator needs the engine to remain idle without also cueing the drive shaft, it is the role of the clutch to keep things safe and functional. If a clutch begins to fail, the drive shaft may turn and the machine may not operate in a safe manner. This replacement clutch is made to work in a long list of yard and garden machines made by Craftsman, Yard Machines, Yard Man, Bolens, MTD, and Troy Bilt. This is an OEM replacement part that is made of durable materials and includes a single washer. It is shipped individually. The tools needed for this repair include a socket and wrench set.

This is the clutch drum that houses the clutch that engages the power tools on more than 50 gasoline-powered lawn and landscape devices. The clutch sits inside this housing, which enables it to rotate. When the RPMs of the engine reach a certain point, the clutch expands and causes the drive shaft of the tool to engage. Among the different kinds of equipment that use this clutch housing are cultivators, edgers, and grass trimmers. The clutch, and therefore the clutch drum, receive a great deal of wear for several reasons: the vibration of the engine, the rapid up and down change of engine revolutions, and resistance met by the tools that are transferred back to the clutch and housing. Signs that the clutch is failing include a slow response to increased engine RPMs and an inability for the power tool to engage the drive shaft. In these cases, the clutch and housing should be replaced in order for the equipment to operate properly again. When choosing a clutch housing, it is important to select one that, like this one, is a genuine OEM certified part. This housing is compatible with Craftsman, Troy-Bilt, MTD, Bolens, Yard-Man, and Ryobi equipment.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.