Need Help?
Call or text
Show parts
Keeps contaminants like dust, pollen, and debris out of your chainsaw engine. Replace when clogged or surface buildup reduces efficiency. Confirm fit with your model number.
Usually ships within 4 - 14 days
This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.
Seals the carburetor adapter to prevent dirt and debris from entering your chainsaw engine. Replace if cracked, brittle, or leaking. Confirm fit by model.
Carburetor adapter for gas chainsaws. Mounts between the engine and carburetor to reduce vibration and isolate heat. Replace if cracked or broken.
The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.
Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.
Symptoms of a bad Fuel Line include:
This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.
Fix poor compression or starting issues with this chainsaw cylinder. Essential engine component for restoring power and performance to your saw.
This clip is a genuine Husqvarna part. It is a clip for a high tension lead. It is made for use with chainsaws. The high tension lead clip helps maintain the tension of the chain portion of the chainsaw.It is possible for the high tension lead clip to become worn over time, and it is also possible that the clip can become disconnected and lost as well. In either case, it must be replaced to safely operate the chainsaw.This clip is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is made to be compatible with chainsaws made by Craftsman, Husqvarna, McCulloch, and Poulan.
Replacement screw for chainsaw case assembly. Secures internal components and housing panels. Replace if stripped, corroded, missing, or damaged.
This part is discontinued by the manufacturer and is no longer available for purchase.
Primer bulb assembly kit for chainsaws. Installs on the carburetor to circulate fuel for easier starting. Replace if bulb is cracked, hardened, or worn.
This replacement part is a screw. It is a genuine replacement part made by Husqvarna. This type of part is very common in different types of appliances. Screws hold different parts together.A new screw might be needed if the user notices that different parts are loose or missing. It is possible for screws to become stripped over time and will need to be replaced. The repair for this screw should be fairly simple and will require a screwdriver and perhaps pliers if the previous screw is stuck in place. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.
Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.
Complete engine gasket kit for chainsaws. Provides tight seals between connected parts to improve performance and prevent carburetor leaks. Confirm fit by model.
Chainsaw won't start or has no spark? The ignition module creates the spark to ignite fuel. Simple 15-minute replacement restores reliable starting.
Replace a cracked, broken, or worn chainsaw muffler. This exhaust component installs on the engine to reduce noise during operation.
Replace a missing, stripped, or damaged bolt on your chainsaw. This fastener secures key components during operation. Essential for reassembly.
Flame protection shield for chainsaws. Mounts near the engine to protect surrounding components from heat. Replace if cracked, warped, or missing.
This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.
Hearing knocking or rattling from your chainsaw engine? A worn piston pin retainer may be the cause. This small metal ring secures the piston pin.
Piston ring for gas chainsaw engines. Seals the combustion chamber around the piston. Replace if worn, damaged, or causing poor compression.
Mounting screw for chainsaws, hedge trimmers, and leaf blowers. Secures internal and external components. Replace if stripped, missing, or damaged.
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
Air filter housing for chainsaws. Replace if cracked, warped, or damaged to maintain proper engine filtration. Verify fit with your model number.
Bar adjuster tool for tightening loose chainsaw chains. Angular design makes bar adjustment quick and easy. Simple hand tool for proper tension.