Parts for Poulan 3350: Engine Parts

This is a wave washer, also called a wave spring washer, that is used in many types of lawn and garden equipment. The wave washer is a small metal disc with a hole in the middle. Rather than being flat like most washers, the wave washer has waves that offer three, four, or six points of contact to better carry a load and create a large range of deflection.As the equipment containing the wave washer is used, it can experience damage or wear and tear. When this happens, the wave washer will not operate as expected by holding the load and assisting other components in the equipment. The equipment will need to be disassembled to reach the wave washer. Remove any parts in the way and remove the old component before replacing it with a new part.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The wave washer is sold as an individual part. The washer is made to be compatible with string trimmers, leaf blowers, chainsaws, carpet cleaners, and trash compactors manufactured by Turf King, Paramount, Broan, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman.

This is a starter spring designed to work with different chainsaw models. It works with the starter and is responsible for recoiling the starter string during engine start-up. When the user pulls the string out, it turns the starter assembly to crank the engine, and then the spring engages in rewinding the string. While the starter spring is made from metal, it will eventually sustain wear and tear-related damage. Metal can lose its springiness, or the spring may become bent or fouled through frequent use. If the starter string does not recoil when cranking the chainsaw, or only retracts part of the way, then the starter spring should be replaced. Replacing the starter spring will require a screwdriver to open the engine housing, and a pair of needle-nose pliers to remove the old spring. Install the new spring carefully – it comes pre-coiled. Note that this spring is made from high-quality, durable metal and is an OEM part. It is sold individually and designed to work with Craftsman and Husqvarna chainsaws.

This starter dog is a genuine Husqvarna part, sold individually. This starter dog can be used as a replacement part for a chainsaw or a string trimmer. The function of the starter dog, otherwise known as the starter pawl, is to work in conjunction with the spring and the starter in order to turn on the engine. When the starter rope is pulled, the pull mechanism activates the starter dog, which is pulled back by the spring, which engages the flywheel, rotates the crankshaft, and starts the engine, all in quick succession. A starter dog is a crucial aspect of the ignition system, so damage to the starter dog will require an immediate replacement with this genuine OEM replacement part. Damage to a starter dog can manifest as punctures or tears that sever it from the pull mechanism and lead to an engine that will not start upon pulling the starter rope. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This starter dog is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

This replacement part is a gasket kit. These gaskets are used in lawn mower engines to help the machine start and stop effectively.A new gasket kit might be needed if the current one is visibly damaged or has parts missing. If the user hears unusual noises coming from inside the machine, it can be due to a malfunctioning gasket kit. Be sure the engine is completely shut down before attempting to replace or repair this part.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in string trimmers, hedge trimmers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might need to be replaced if the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is dented, cracked, pierced, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part. If the screw is lost, it should be replaced as well. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This replacement part is a washer. This is a genuine replacement part made by Husqvarna. Washers are small but important to the overall workings of the machine. This part works with other small pieces such as nuts and screws to keep parts in place and in working order.A new washer might be needed if the current one is missing or damaged in any way. This can be caused by normal wear and tear. Washers can endure a large amount of friction over time and can become stripped as a result. If this is the case, be sure to replace the part as it might not work as effectively as during prior uses. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.

This replacement part is a gasket kit. These gaskets are used in lawn mower engines to help the machine start and stop effectively.A new gasket kit might be needed if the current one is visibly damaged or has parts missing. If the user hears unusual noises coming from inside the machine, it can be due to a malfunctioning gasket kit. Be sure the engine is completely shut down before attempting to replace or repair this part.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.