Parts for Poulan 917223980: Engine Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This engine pulley is a genuine MTD part, sold individually. This engine pulley can be used as a replacement part in a lawnmower. The purpose of the engine pulley in a lawnmower is to guide the rotational motion of the drive belt within the internal mechanisms of the lawnmower such that the belt can facilitate the rotation of the wheels and the propulsion of the appliance across a variety of surfaces when in use.If the engine pulley has been cracked, scraped, punctured, dented, warped, or eroded to the point that it can no longer serve its function, the engine pulley should be removed and replaced by this genuine OEM replacement part as soon as possible.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This engine pulley is compatible with the following outdoor appliance brands: MTD and Craftsman.

This fuel cap is a genuine Husqvarna part, sold individually. This fuel cap can be used as a replacement part in a lawn mower. The purpose of the fuel cap in a lawn mower is to seal the fuel tank.The fuel cap in a lawn mower might have to be replaced if it is damaged and allowing fuel to leak out or debris to reach the fuel tank. This could occur if the fuel cap is punctured, dented, warped, or eroded to the point of exposing the internal mechanisms of the appliance to the outside. If this occurs, the fuel cap should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This fuel cap is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This exhaust pipe is a genuine Husqvarna part, sold individually. This exhaust pipe can be used as a replacement part in a lawn mower. The purpose of the exhaust pipe in a lawn mower is to redirect gases and combustion away from the appliance and from the operator.The exhaust pipe in a lawn mower might have to be replaced if it or any component near it shows signs of damage. Signs of damage to the exhaust pipe can include increased or unusual noise coming from the exhaust, reduced fuel economy, strong gasoline odor, hard starting or misfiring engine, or a burning smell from the exhaust. If any of these signs of damage occur, the exhaust pipe should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This exhaust pipe is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.

A hex screw can be used on a variety of different types of lawn and garden equipment. On small machines, it can be used to hold the housing together while on larger machines, it might be used to mount on the gas tank. It's versatile with the ability to secure items including wood, plastic, metal, and brick together. The screw is made of high-quality metal and measures 5/16-18 x ¾ inches. Sometimes these screws can become stripped, get damaged, or even break and will need to be replaced.Inspect the screw for any damage, looseness, or debris that might be causing issues. If the damage is major or the screw is stripped, it will need to be replaced. In most cases, the screw can be removed using nothing more than a screwdriver before inserting the replacement screw. For stripped screws, pliers may be needed to get the original screw out of the equipment.This hex screw is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The screw is compatible with lawnmowers, string trimmers, snowblowers, and tillers by Craftsman, Ariens, Husqvarna, Poulan Pro, Weed Eater, and Poulan.