Parts for Yard-Man 31AE9P3I801: Engine Pulley Parts

This power cord extension is a genuine MTD part, sold individually. This power cord extension can be used as a replacement part for a snowblower. This power cord extension lengthens the reach of the power cord so that the appliance can be used from a greater distance from its direct power source while it is plugged in. The power cord extension might have to be replaced at some point if the cord suffers damage that renders it beyond functionality. This could occur if the cord is frayed, if it gets wet, or if it is punctured, torn, scratched, or eroded to the point that it does not power on the snowblower when properly plugged in. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This power cord extension is compatible with the following outdoor appliance brands: MTD, Toro, Cub Cadet, Ryobi, Tecumseh, Lawn Boy, Huskee, Montgomery Wards, Bolens, Yard Man, Troy-Bilt, and Yard Machines.

Self-tapping hex screw for securing components on lawn mowers, tractors, tillers, and outdoor power equipment. Replace when stripped, missing, or worn.

Replacement belt cover for snow blowers. Replace if cracked, broken, or missing to protect drive components from snow and debris. Verify fit with your model.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Replace a broken, stripped, or missing hex bolt on your lawn mower or outdoor power equipment. Standard hardware for securing components.

Flat washer for lawn mowers and tractors. Replace if missing, corroded, or damaged during maintenance. Ensures secure fastening of components.

Flat washer for lawn tractors and riding mowers. Secures bolts and distributes load across assemblies. Replace if worn, corroded, or missing.

Hex head screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if missing, stripped, or damaged during maintenance.

Hex cap screw for snowblowers and outdoor power equipment. Secures engine, deck, or housing components. Replace if stripped, rusted, or missing.

Square key for lawn tractors, tillers, and snow blowers. Secures shafts and pulleys. Replace if worn, sheared, or missing to restore proper assembly.

This washer is a genuine MTD replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, and lawn mowers. The purpose of a washer is to protect and insulate nuts, bolts, and other types of fasteners, preventing these fasteners from gradually loosening. A washer will have to be replaced in the event that it is lost or misplaced, a common occurrence given its extremely small size and its ability to slide off without calling any attention to its absence. Other reasons to replace a washer could include general wear and tear or visible damage in the form of erosion, bending, or cracking metal as a result of overuse or overexposure. If a washer is subject to any of this kind of damage, it should be replaced immediately to avoid nuts and bolts coming loose and separating the materials that they protect and hold together. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This washer part is compatible with the brands MTD, Yard Machines, Cub Cadet, and Yard Man.

Arctic grease lubricant keeps your snow thrower's moving parts protected in freezing conditions. Replace seasonally or when mechanisms stiffen. Confirm fit with your model number before ordering.

Shield spacer for lawn tractors and riding mowers. Provides proper spacing and alignment for protective shields. Replace if missing, damaged, or worn.

This v-belt is a genuine MTD part. It is a replacement part for snowblowers and snow throwers. The v-belt, or the auger drive belt, causes the auger to rotate on the snow blower. This part takes up the snow to throw it out of the way.It is normal for the v-belt to become worn over time. Signs that the v-belt needs replacement include malfunction due to the auger not running. To make this repair, be sure the engine has completely cooled, disconnect the spark plug to prevent accidental start, and empty the fuel tank.This v-belt is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with snow blowers and throwers manufactured by Craftsman, MTD, White Outdoor, Cub Cadet, and Troy-Bilt.

The engine pulley is a wheel that guides or drives the belt or belts within the engine compartment. The pulley has groves to help keep the belt secured in place while it spins around the component. The engine pulley belts are typically composed of high-quality, heat-resistant metal materials to withstand high temperatures and long periods of use. At times, the engine pulley can wear out, break, or become otherwise ineffective at performing its function. When this happens, a replacement engine pulley is required.When trying to determine if the engine pulley is faulty, check for belts that continually need to be adjusted or tightened or a pulley that won't secure belts at all. Be sure to have the appropriate tools for the repair on hand. Wear gloves for protection and ensure the motor is completely cooled before starting.This is an engine pulley replacement part that is an authentic OEM piece. It is sourced from the manufacturer and sold as an individual unit. The engine pulley is compatible with various engines found in edgers, trimmers, and snow blowers made by MTD, Yard-Man, Troy-Bilt, Cub Cadet, and Yard Machine brands.

Fix clutch engagement issues or drive belt slipping with this drive idle bracket. Holds the idle pulley in place for proper belt tension and operation.