Parts for Ge PDT775SYNBFS: Escutcheon & Door Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Secures and supports the dishwasher door for smooth opening and closing. Replace if hinge is cracked, broken, or causing misalignment issues.

Right-hand hinge arm assembly supports and guides your dishwasher door through its full travel. Replace if bent, worn, or causing uneven door movement.

Replacement flange screw for dishwashers. Secures panels, brackets, and internal components. Replace when stripped, missing, or damaged during repair.

If your dishwasher door feels hot or runs inefficiently, this door insulation panel restores thermal barrier. Fits inside door to reduce heat transfer.

Replaces a cracked, worn, or damaged dishwasher door handle. Restores secure grip and clean appearance. Stainless steel finish for durability.

Dishwasher door handle bracket that secures the handle to the door panel. Replace if bracket is cracked, broken, or missing to restore handle stability.

Fix a dim or dark dishwasher control panel with this LED light board. Restores clear button visibility and display illumination for easier operation.

Control panel lens and adhesive assembly for your dishwasher. Replaces a cracked, scratched, or missing lens cover on the display panel.

10-32 x 9/16" machine screw secures dishwasher panels, brackets, and internal assemblies. Replace missing, stripped, or damaged fasteners to restore fit.

Front lower trim panel that covers the dishwasher base. Replace if cracked, damaged, missing, or to refresh appearance. Direct-fit cover piece.

This T15 Torx mounting screw secures internal dishwasher components and panels. Replace screws that are stripped, missing, or lost during repairs.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Left-hand attachment strip secures trim and panels on your dishwasher for a clean, finished appearance. Replace if cracked, broken, or missing.

The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.

Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.

Symptoms of a bad door latch strike include:

• The dishwasher door not latching securely
• The dishwasher not starting or stopping mid-cycle
• Leaks around the door during operation
• Difficulty in closing the door properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

Replace your dishwasher's detergent dispenser module when cracked, broken, or not dispensing properly. This module houses the dispenser mechanism.

This vent cover is the exterior trim piece that finishes and protects the dryer's exhaust outlet, keeping the vent opening sealed and looking complete. Replacing a damaged cover restores a clean outlet and helps direct airflow into the vent. What it does:

• Covers and protects the dryer exhaust opening from debris and pests
• Guides exhaust airflow into the vent duct for proper ventilation
• Prevents larger lint clumps and objects from entering the exhaust outlet
• Replaces cracked, broken, warped, or missing outlet trim that can interfere with venting

• One vent cover

• Disconnect power to the appliance before starting any work
• Remove the old cover by unscrewing or unfastening retaining hardware, then align and secure the replacement
• Use basic hand tools and avoid forcing the cover to prevent cracking
• Inspect the vent hose and duct for lint and obstructions while the cover is off; clean as needed

Detergent not dispensing during wash cycle? This dishwasher detergent dispenser plate holds and releases detergent at the right time for proper cleaning.

Door conduit vent for dishwashers. Mounts on the door to provide ventilation. Replace if cracked, broken, or missing to restore proper airflow.

Controls airflow in your dishwasher door. Replace if cracked or if you see leaking from the door vent area. Confirm fit with your model number.

This door vent is mounted on the dishwasher door and allows steam and moisture to escape from the wash compartment during the drying cycle. It helps regulate airflow and pressure inside the dishwasher to promote effective drying. Replace this vent if it is cracked, warped, or clogged, which can lead to poor drying performance or excessive moisture buildup on dishes.

Right-side door trim for dishwashers. Covers the door edge and mounting area for a clean, finished look. Replace when cracked, chipped, or worn.

Left-side door trim piece for dishwashers. Replaces cracked, chipped, or worn trim to restore proper door fit and exterior appearance.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.