Parts for Ge CDT835SSJ2SS: Escutcheon & Door Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Secures and supports the dishwasher door for smooth opening and closing. Replace if hinge is cracked, broken, or causing misalignment issues.

Right-hand hinge arm assembly supports and guides your dishwasher door through its full travel. Replace if bent, worn, or causing uneven door movement.

If your dishwasher door feels hot or runs inefficiently, this door insulation panel restores thermal barrier. Fits inside door to reduce heat transfer.

Stainless steel outer door panel assembly for your dishwasher. Replaces cracked, dented, or scratched exterior door panels to restore appearance.

Replacement mounting bracket that secures your dishwasher door handle. Needed when the original bracket is cracked, broken, or worn, causing loose handle attachment.

Fixes dishwasher display issues, blank screens, or unresponsive buttons. Replaces the control panel board. Moderate DIY repair, about 1 hour.

Console cover assembly for dishwashers. Protects and covers the control panel. Replace if cracked, discolored, broken, or damaged from heat exposure.

Transmits light from status indicators to the control panel display. Replace if broken, cracked, or lights are dim/not visible. Verify fit with model number.

Replace your dishwasher's door lens and adhesive assembly when the lens becomes cracked, broken, or cloudy. Installs on the control panel for a clean finish.

Fix a dishwasher that won't start, respond to buttons, or display cycles with this control panel. Handles all touch inputs and cycle selections.

The User Interface Housing is an OEM replacement part for GE dishwashers. Located at the front of the console, it houses the control panel responsible for cycle/option navigation.

The housing protects sensitive electronic components from water damage and physical impact. Its sturdy construction allows for responsive touch inputs without flex or play in the assembly. 

Symptoms of a bad user interface housing include:

• Warping or cracks exposing circuitry to damage
• Faulty sealing allowing moisture penetration
• Difficulty registering button presses from structural defects
• Ill-fitting installation negatively impacting usability

Causes can be repetitive openings allowing entry of dirt/moisture into critical areas and use over the years breaking down seals and weakening materials.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Replaces the control panel button and graphics assembly on your dishwasher. Order a new assembly if buttons are cracked, graphics are faded or peeling.

10-32 x 9/16" machine screw secures dishwasher panels, brackets, and internal assemblies. Replace missing, stripped, or damaged fasteners to restore fit.

Fix intermittent controls, no-start issues, or cycles stopping when the door moves. This door wire harness assembly restores power and signal connections.

Replace your missing or damaged dishwasher toe kick insulation panel. Blocks drafts and protects internal components. Easy DIY installation repair.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This T15 Torx mounting screw secures internal dishwasher components and panels. Replace screws that are stripped, missing, or lost during repairs.

Left-hand attachment strip secures trim and panels on your dishwasher for a clean, finished appearance. Replace if cracked, broken, or missing.

6-20 x 3/8 inch nickel screw secures trim panels, brackets, and small components in dishwashers and ovens. Replace missing or stripped screws.

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

The Inner Door Panel is an OEM part for GE dishwashers. It serves as the inner lining of the dishwasher door, ensuring a watertight seal and supporting components like the detergent dispenser and vent assembly.

Common causes of a bad inner door panel include wear and tear from regular use, exposure to high temperatures and harsh detergents, or physical impacts that cause cracks or warping.

Symptoms of a bad Inner Door Panel include:

• Water leaking from the door area during operation
• Difficulty in opening or closing the door properly
• Visible cracks, warping, or other damage to the panel
• Malfunctioning detergent dispenser or other door-mounted components

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix a detergent door that won't open during wash cycles. This dishwasher dispenser module restores proper detergent and rinse aid release timing.

Fits over the vent on your dishwasher door. Replace if cracked, broken, or loose. Allows steam to escape while protecting interior components.

Routes exhaust air from your dishwasher through the proper ventilation channel. Replace if damaged, crushed, or disconnected. Verify fit with your model.

Controls airflow in your dishwasher door. Replace if cracked or if you see leaking from the door vent area. Confirm fit with your model number.

Duct that connects the dishwasher door vent system. Replace if cracked, broken, or causing leaks inside the door. Installs between vent and cover.

Weak airflow from your dishwasher vent? This vent fan assembly restores proper exhaust circulation to clear steam and odors. Direct replacement part.

Right-side door trim for dishwashers. Covers the door edge and mounting area for a clean, finished look. Replace when cracked, chipped, or worn.

Left-side door trim piece for dishwashers. Replaces cracked, chipped, or worn trim to restore proper door fit and exterior appearance.

Chrome badge emblem that displays the logo on the front of your refrigerator. Replace if cracked, peeling, missing, or worn to restore appearance.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.