Parts for Kitchenaid KUID508ESS2: 03 - Evaporator, Grid, And Water Parts

Reduces chlorine, contaminants, and odors from your refrigerator's water and ice. Replace every 6 months for optimal performance. Confirm fit by model.

Replacement screw that secures panels, brackets, and trim to appliance cabinets. Restores reliable hold when original hardware is stripped or missing.

Replace your ice maker's water distribution tube if cracked, broken, or kinked. Routes water between internal components to restore proper flow.

Ice maker not producing ice or evaporator pan bulging? This evaporator requires HVAC certification, vacuum pump, gauges, and refrigerant skills.

Fix water not draining or pooling issues in your ice maker with this drain pump. Common when ice is cloudy, small, or machine won't cycle. 1-hour DIY repair.

The Reservoir Drain Tube is an OEM part for Whirlpool freestanding icemakers. It is responsible for draining melted water from the reservoir during the harvest cycle. This tube removes water to allow for new ice formation. 

Causes of a bad reservoir drain tube can include mineral buildup or blockages within the tube inhibiting proper drainage over time. Additional causes may be cracks, cracks, kinks, or other damage limiting water flow.

Symptoms of a bad reservoir drain tube include:

• Water not draining from the reservoir after harvest
• Excess water collecting in the reservoir 
• Slow or reduced ice production due to poor drainage
• Leaks or water spills around the drain tube area

This OEM Whirlpool replacement tube is also compatible with freestanding ice components manufactured by select Kenmore models. 

Leaking or damaged tube in your ice maker? This replacement tube restores secure connections between components to prevent leaks and ensure proper flow.

Ice maker not filling or making ice? A cracked or kinked water tube prevents water from reaching the ice maker. This tube transports water from the supply line.

This spacer maintains the correct distance between mating components in your appliance's assembly so parts align and operate smoothly. Replacing a worn or missing spacer can correct looseness, rubbing, or vibration-related noise.

• Holds a precise gap between parts for proper alignment and motion
• Prevents metal-to-metal contact and premature wear
• Helps reduce vibration, rattling, and scraping noises
• Common signs include misalignment, unusual gaps, looseness, or rubbing in the related assembly

• Disconnect power (and shut off gas/water, if applicable) before servicing
• Refer to your model's diagram to locate the spacer's exact location and orientation
• Inspect related fasteners and bushings; replace if worn
• Do not overtighten hardware to avoid deforming the spacer

This water slide reservoir replaces the cracked or damaged reservoir that channels water to the dispenser/ice system, restoring a secure pathway for water and preventing leaks or loss of dispenser function. What it does:

• Collects and directs water from the inlet to the dispenser/ice mechanism
• Seals the water pathway to prevent leaks or puddling inside the cabinet
• Helps maintain proper water flow to the dispenser and icemaking components
• Commonly replaced for visible cracks, leaks, or reduced dispenser performance

• One water slide reservoir

• High-level fit: installs in the dispenser/ice assembly per OEM diagram; verify placement before fastening
• Recommended safety: unplug or disconnect power and shut off water supply before service
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the plastic

Water tube connects your ice maker's water supply. Replace if dirty, clogged, or leaking to restore proper water flow. Verify fit with your model number.

Fix poor ice production or uneven cooling caused by a loose evaporator assembly. This support bracket secures the evaporator grid for proper airflow.

Replace your ice maker's water tube to restore proper flow and eliminate leaks. Install when cracked, kinked, or brittle. Confirm fit with your model number.

Size: 8-18 x 1 1/4 inch.

Ice maker producing whole slabs instead of cubes? A broken cutter grid prevents proper ice separation. This wire grid slices frozen ice into uniform cubes.

Grid cover for 18-inch freestanding ice makers. Replace this structural component if the original is cracked, broken, or missing to restore appearance.

Ice maker not producing ice or making less ice than normal? A cracked or deteriorated water pan prevents proper water flow to the evaporator. DIY repair.

Size: 8-18 x 5/8 inch.

Seals the drain port to contain water and prevent leaks. Replace if cracked, stripped, or missing to maintain proper drainage. Confirm fit with model.

Push-in nut for ice makers. Secures internal components during assembly and repair. Replace if missing, stripped, or damaged during maintenance work.

Secures the recirculation cover in your ice maker. Replace if bracket is cracked, broken, or missing to restore proper positioning and eliminate rattling.