Parts for Yard-Man 13BT604H755 / 2005: Fender Parts

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This part is a replacement spacer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace broken or defective spacers in a variety of lawn tractor models. This spacer prevents too much friction from occurring by keeping parts from rubbing against one another. This part should be immediately replaced if lost, work, or otherwise rendered ineffective. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this spacer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this spacer is suitable for use on several different models of lawn tractors manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement flat washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, lost, or defective flat washer in a variety of outdoor power equipment models. Flat washers are a standard piece of hardware that can be used with a wide variety of equipment. They enable components to be tightly secured together by providing a larger surface area for screws or bolts. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this flat washer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this flat washer is suitable for use on several different models of outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This genuine OEM replacement bracket stop seat is for riding lawn mowers or tractors. The part is located underneath the seat on riding mowers or tractors. Its purpose is to provide a safety shut off function when the rider leaves the seat while the blade is engaged. Over time, constant use of the mower can cause wear on the bracket, requiring it to be replaced. If a mower is left in the elements over an extended period of time, the bracket could rust. This would require the bracket to need replacing. Failure to replace a worn or rusted bracket stop seat could cause potential safety hazards as the engine may to fail to shut off if the rider should leave the seat while the blade is engaged. Replacing a bracket stop seat requires a screwdriver to replace. It is a fairly easy repair that should take under 30 minutes to complete. This part serves as a replacement if needed for the original bracket stop seat. This bracket is compatible with Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Husky, Montgomery Wards, Bolens, Yard-Man, and Ryobi brands. This bracket is sourced directly from the manufacturer and is sold individually.

This replacement part is a ratchet fastener, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This ratchet fastener is found on most lawn mowers and is similar to a screw in that it helps keep parts of the appliance in place and secure.A new fastener might be needed if the current ones are damaged or missing. It is common for these types of fasteners to become stripped over time after years of normal wear and tear. The repair for this part should be fairly easy and will only require a screwdriver and possibly pliers if there is a fastener stuck. If there are parts of the lawn mower that are loose or falling off, a new fastener might be needed. This small part is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as some appliances require more than one.

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This is a self-tapping screw that can be used on a wide variety of lawn and garden equipment in many applications. A self-tapping screw is used to secure metal, wood, plastic, and brick together. When using a self-tapping screw, there's no need to drill a pilot hole since the screw makes its own hole. The only exception is with metal, which will still need a drilled hole before installation. There are many situations when a screw may need to be replaced. Some screws are damaged or broken, while others can become loose and no longer hold materials together. Screw heads can become stripped, which will also mean they need to be replaced. A visual inspection can often give an indication of whether you should replace a self-tapping screw. This is a genuine OEM hex head screw that can be used on various lawn and garden equipment, including wood chippers, lawn mowers, snowblowers, log splitters, tillers, edgers, and leaf blowers. It's compatible with products by MasterCut, Craftsman, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Troy-Bilt, Montgomery Wards, Murray, Huskee, Yard Machines, MTD, and more. This screw is sold individually.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This actuator spring is a genuine MTD part, sold individually. This actuator spring can be used as a replacement part in a lawn mower. The purpose of the actuator spring, also known as a seat spring switch, in a lawn mower is to provide a plate upon which the seat switch can conduct its electrical current while being held stably in place.If the actuator spring slides out of place and cannot be reinstalled or if it is bent, broken, dented, or worn beyond repair, it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This actuator spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This replacement part is an insulator plate. It is a genuine replacement part made by MTD. This small part is important to the overall operation of many different machines. It helps to insulate other parts inside the machine as well as allow them space to operate. A new insulator plate might be needed if the current one is missing or damaged in any way including being dented, cracked, chipped, or bent. This can be due to normal wear and tear as it is common that parts become broken overtime. Be sure to refer to the correct owner's manual before attempting to replace this part. This part is a genuine OEM replacement part. This insulator plate is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This replacement part is a grip handle. It is a genuine replacement part made by MTD. This part is responsible for helping the user control the machine or appliance. The grip handle is important to allow for total control over the appliance so that the user may operate it properly. A new grip handle might be needed if the current one is damaged in any way including being dented, cracked, chipped, or stripped. This can be due to normal wear and tear or a single incident. If the user is unable to hold the appliance using the grip handle, it might be time to replace it. Refer to the owner's manual before replacing this part. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This lift cable is designed for use with many lawnmowers and snowblowers to ensure that the gears run smoothly while using the equipment. The lift cable is made of durable materials but has delicate connectors on each end which may eventually wear out. When the connectors or cables are damaged, the part will need to be replaced. This component is important since it helps control how fast the blades or other parts of the tool can operate. If the cable breaks, the tool may not start.If the lift cable has gone bad, is worn out, or is damaged, replacement is needed. There will be no need to use tools during the process, but work gloves can be helpful. The lift cable can be untwisted from the housing and removed from the tool. Take the new component and place it in the same location. Make sure to reassemble any additional parts before useThis is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The lift cable is made to fit lawnmowers and snowblowers manufactured by Craftsman, Toro, Cub Cadet, Troy-Bilt, MTD, Huskee, Montgomery Wards, and Yard-Man.

This replacement part is a deck lift arm and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This deck lift arm is found in many types of lawn mowers and helps the user adjust the deck in many appliances. A new deck lift arm might be needed if the user notices that the current one is not working properly. It is not unusual for these parts to need replacing as they can become damaged or jammed after normal wear and tear. Be sure to wear work gloves when attempting to replace this part as injury can occur. Reference the specific user manual for more information on how to replace this part. This deck lift arm is a genuine OEM replacement part and sourced directly from the manufacturer. This specific deck lift arm is sold as a single piece and is made of durable metal.

This is a self-tapping screw that can be used on a wide variety of lawn and garden equipment in many applications. A self-tapping screw is used to secure metal, wood, plastic, and brick together. When using a self-tapping screw, there's no need to drill a pilot hole since the screw makes its own hole. The only exception is with metal, which will still need a drilled hole before installation. There are many situations when a screw may need to be replaced. Some screws are damaged or broken, while others can become loose and no longer hold materials together. Screw heads can become stripped, which will also mean they need to be replaced. A visual inspection can often give an indication of whether you should replace a self-tapping screw. This is a genuine OEM hex head screw that can be used on various lawn and garden equipment, including wood chippers, lawn mowers, snowblowers, log splitters, tillers, edgers, and leaf blowers. It's compatible with products by MasterCut, Craftsman, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Troy-Bilt, Montgomery Wards, Murray, Huskee, Yard Machines, MTD, and more. This screw is sold individually.

This seat pivot bracket is a genuine MTD part, sold individually. This seat pivot bracket can be used as a replacement part in a lawn mower. The purpose of the seat pivot bracket is to allow the seat to be set to various adjustments for the comfort of the operator while the appliance is in use.The seat pivot bracket in a lawn mower might have to be replaced if it can no longer be used to adjust the angle of the seat of the appliance. The seat pivot bracket could be dented, cracked, punctured, warped, or eroded to the point that its functionality is reduced or negated, and if this occurs, the seat pivot bracket should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This seat pivot bracket is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Murray, Yard Machines, Yard Man, Huskee, Bolens, and MasterCut.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in lawn mowers, lawn tractors, chipper shredders, and wood chippers. The purpose of the screw in one of these small engine outdoor appliances is to serve as a fastening component for one or more parts.The screw is a small component that can be easily lost or misplaced during use or maintenance. If the screw is lost at some point, it should be replaced by this genuine OEM replacement part. As a result of general wear and tear over long-term use, the screw can also be stripped or damaged to the point that it cannot serve its function of fastening one or more internal components of the appliance. If this occurs, the screw should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Ryobi, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, and Yard Man.