Parts for Lg LSC26945SW: Freezer Compartment 2 Parts

This insulated duct assembly routes dryer exhaust while helping reduce heat loss and dampen airflow noise for more efficient, quieter operation. It replaces a worn or damaged dryer vent pathway. What it does:

• Channels exhaust air from the dryer to the external vent to maintain proper ventilation
• Insulation helps retain heat along the duct, improving drying efficiency
• Reduces airflow noise and vibration compared with an uninsulated duct
• Fits into the dryer's exhaust path to restore correct airflow when the original duct is torn, crushed, or degraded

• One insulated duct assembly

• Disconnect power and gas (if applicable) before starting any work
• Work on a cool, unplugged appliance; wear gloves to protect from sharp edges
• Installation requires basic hand tools and access to the dryer rear or interior; refer to the service manual for model-specific steps

Replacement vegetable drawer tray assembly that restores the refrigerator's crisper storage area, keeping produce contained and organized while preventing spills from reaching lower shelves. Installs as a direct replacement for damaged or missing drawers. What it does:

• Provides a removable storage bin for fruits and vegetables to keep items organized and contained.
• Replaces cracked, broken, warped, or missing drawers that don't slide or hold items properly.
• Contains spills and makes cleanup easier by keeping liquids and debris confined to the drawer.
• Interfaces with the existing crisper rails and cover so the compartment functions as intended.

• Remove food and any loose shelves or covers before installing; handle plastic parts carefully to avoid cracks.
• Slide the drawer onto the existing rails/guides until it seats; alignment may require lifting or lowering the rails slightly.
• If the drawer does not slide smoothly, inspect rails/glides for damage or debris and clean or replace as needed.

The Guide Rail is an OEM replacement part for LG refrigerator shelves. Running horizontally inside the refrigerator cavity, these durable rails smoothly guide shelf movement during height adjustment. This rail is for the left side.

Causes of faulty guide rails can include dents or damage occurring from heavy loads, as well as plastic degradation from prolonged use. 

Symptoms include:

• Shelves difficult to pull out fully or reinsert  
• Scratching or binding noises heard during adjustments
• Shelves unable to securely lock into place

Note: Per factory, Roller 4580JA3034A and screw 1SBZJA3004K no longer come with guide rail.

This OEM LG replacement is also compatible with select Kenmore refrigerators.

The Guide Rail is an OEM part for LG refrigerators. It is designed to support and guide the movement of refrigerator drawers, ensuring they slide smoothly in and out. This component helps in maintaining the proper alignment and functionality of the drawers, making it easier to access stored items.

Causes of a bad guide rail include wear and tear over time, excessive force or weight applied to the drawers, or accidental impact that causes cracks or bends in the rail. Ensuring the guide rail is in good condition is crucial for the smooth operation of refrigerator drawers.

Symptoms of a bad guide rail include:

• Difficulty in opening or closing drawers
• Drawers not staying aligned or securely in place
• Noticeable wobbling or uneven movement of the drawers
• Unusual noises when moving the drawers

This OEM LG part is also compatible with Sears/Kenmore.

Note: Per factory, Roller 4580JA3034A and screw 1SBZJA3004K no longer come with guide rail.

This is a water filter intended for use with LG refrigerators. It is used in tandem with the water dispenser on the refrigerator door to purify drinking water. Replacing thee water filter every six months on average is recommended. It is necessary to swap out every year at a minimum, depending on how frequently it is used.Indications that the water filter needs to be switched include water with unusual odors or tastes. The components used to filter the water will stop working, allowing contaminants that could be dangerous to break off and enter the drinking water. Replacement of the LG water filter is simple. Remove the old filter and screw the new one into place in just a few seconds.This LG water filter is a genuine OEM replacement part. It is sold individually. The LG water filter comes sourced directly from the manufacturer and is made of high-quality, durable materials. The LG water filter is only compatible with LG brand refrigerators.

This cover tube is a molded protective housing that shields internal components and wiring from wear, heat, and debris. It helps maintain safe operation and prevents rubbing or chafing that can lead to damage. What it does:

• Covers and protects internal wiring, hoses or assemblies from contact and abrasion
• Helps direct airflow and keeps debris away from sensitive parts
• Reduces noise caused by rubbing or loose components
• Preserves component alignment and prevents premature wear

• Disconnect power to the appliance before beginning any repair.
• Installation requires partial disassembly of the appliance; keep track of screws and clips.
• Use OEM replacement and follow the service manual for correct orientation and torque of fasteners.
• If you see damaged wiring or other compromised parts, replace or repair those items before reinstalling the cover tube.

This holder is a small mounting bracket that secures a mating component in place inside the appliance. Replacing a cracked or missing holder restores a firm, rattle-free fit and proper alignment.

• Provides a stable mount for the designated part
• Prevents shifting and vibration that can cause noise or premature wear
• Common signs of failure: broken tabs, stress cracks, or the attached part sagging or falling out
• When damaged, the connected component may be loose, noisy, or misaligned

• Disconnect power; if working near water tubing, also shut off the water supply
• Note the original orientation and mounting points; take a photo before removal
• Reuse existing fasteners and avoid overtightening to prevent cracking the plastic
• Ensure the attached component is secure and clears any moving parts before restoring power