Parts for Ge PSC23MGMBCC: 02 - Freezer Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Fresh food side. Color: white. For the same part in black, purchase WR02X10779.

The Fresh Food Door Gasket is an OEM replacement part for GE refrigerators. It forms an air-tight seal around the fresh food door preventing air and moisture exchange between the refrigerator interior and exterior. The gasket helps to maintain the ideal temperature and humidity levels inside for optimal food storage.

Causes of a bad gasket can include cracks, tears, or worn-away sections compromising the air-tight seal over time. Exposure to heat, moisture, or chemicals during cleaning may also degrade sealing qualities.

Symptoms of a bad gasket include:

• Cool air leaking from around the door
• Interior surfaces becoming wet or frosty
• Difficulty maintaining proper interior temperature settings

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Bin is an OEM part for GE refrigerators. It is a convenient storage compartment located on the interior of the refrigerator door, designed to hold and organize smaller items such as condiments, jars, or beverages.

Symptoms of a faulty door bin:

• Cracks or breaks in the bin itself
• Difficulty in removing or inserting the bin
• Loose or misaligned fit within the door
• Leaks or spills from the bin

Causes of a bad door bin can include physical damage from impact or excessive force, general wear and tear over time, or issues with the mounting brackets or support mechanisms.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models. 

This fixed module shelf supports and secures the refrigerator freezer control module and related electronics to prevent movement and vibration. It restores proper mounting and helps keep wiring and components stable. What it does

• Provides a stable mounting platform for the freezer control module and related circuit components
• Prevents module movement and vibration that can cause noise or intermittent connections
• Helps keep wiring and connectors routed away from moving parts and cold airflow
• Used when the original shelf is cracked, bent, or missing, causing loose electronics

• One fixed module shelf

• Disconnect power to the appliance before starting any work
• Handle electronics and connectors carefully to avoid damage from static or force
• Retain or replace mounting screws and clips as needed; inspect surrounding wiring routing

This replacement insert module restores proper fit and support inside the appliance's FF assembly, helping secure components and reduce looseness. It's a direct-fit replacement designed to stop rattling and restore stable alignment. What it does:

• Secures and positions internal components in the FF assembly to maintain correct spacing and alignment
• Replaces cracked, broken or worn inserts that allow movement or vibration
• Helps eliminate rattling, knocking or loose-feeling parts caused by a failed insert
• Preserves intended part geometry so adjacent components mount correctly

• Disconnect power to the appliance before starting any repair to avoid electrical hazard
• Remove only the panels and fasteners specified in your model's service instructions to access the insert
• Handle plastic clips and tabs carefully to avoid breakage; replace any damaged fasteners
• Test fit and operation before reassembling all panels

This module snugger is a small retaining piece used in the refrigerator to hold its associated module or component securely in place. Replacing a cracked or missing snugger restores a tight fit, reduces vibration and noise, and supports correct operation.

• Secures the related module or assembly to prevent shifting
• Helps maintain proper alignment for reliable performance
• Reduces rattles and wear from vibration or movement
• Typical signs it's needed: part is broken or missing, components feel loose, or you hear rattling

• Disconnect power to the refrigerator before servicing
• Note the original orientation and location; take a photo for reference
• Reuse existing fasteners or clips if applicable; avoid overtightening
• After installation, confirm the part holds the assembly firmly and that movement is smooth where intended

The Door Bin is an OEM part for GE refrigerators. This door bin is designed to fit onto the inner door panel of the refrigerator, providing convenient storage for condiments, bottles, and other items that need to be easily accessible. The use of this bin helps to maximize the storage capacity of the refrigerator, keeping items organized and within reach. 

Causes of damage to the door bin often include overloading it with too much weight, which can lead to stress cracks or breakage. 

Symptoms of a bad Door Bin include:

• Cracks or breaks in the bin 
• The bin not fitting properly onto the door panel 
• Difficulty in sliding the bin in and out or removing it for cleaning 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Module Shelf Insert is an OEM part for GE refrigerators. It's designed to enhance the versatility and organization within your fridge by providing an additional layer of storage on existing shelves. This insert allows for the separation of items, making it easier to organize and access your refrigerated goods. 

Causes for a Module Shelf Insert to become problematic can stem from overloading it with heavy items, accidental damage from moving items in and out of the fridge, or the natural wear and tear that comes with regular use. 

Symptoms of a bad Module Shelf Insert include:

• Difficulty fitting or staying in place on the refrigerator shelf.
• Cracks or damage that compromise its ability to hold items securely.
• Warping that prevents it from sitting flat or properly dividing the shelf space.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This is a screw intended for use in refrigerators, specifically as the top mounting screw for the handle. If the screw in the handle is missing, stripped, or otherwise not performing its function, a replacement screw should be ordered.A visual inspection will determine if a screw is missing. If the door handle is loose or falling off from the top, it is a sign that a replacement screw is required. This repair is a quick and easy process. It involves the use of a screwdriver. Remove the old screw if there is one in place. Line up the holes on the door and the door handle component before twisting the new screw into position. Wear gloves to protect hands during the repair.This screw is a genuine OEM replacement part. It is sourced directly from the manufacturer. The screw is sold individually. The screw is compatible with several different models of refrigerators. It can be installed in ranges made by Electrolux, Frigidaire, Gibson, Westinghouse, and Kelvinator.

This is a replacement 10-32 x 1 machine screw used to fasten appliance components. It restores secure mounting of panels, brackets and hardware so parts stay aligned and vibration or rattling is reduced. What it does:

• Secures panels, brackets, housings and small components to the appliance frame
• Keeps control boards, motors or assemblies held firmly in place
• Prevents loose parts that can cause vibration, noise or intermittent connections
• Matches the OEM thread and length for proper fit when replacing a worn or missing screw

• Disconnect power before working inside the appliance
• Use the correct 10-32 driver or bit to avoid stripping the head
• Thread into the original hole and tighten snugly; avoid over-torquing
• Replace with the same size and thread type to ensure proper fit and safety

This door foam assembly replaces the insulating core inside a refrigerator/freezer door to help restore proper temperature retention and reduce frost buildup. It renews the door's thermal barrier to improve cooling consistency and energy use. What it does:

• Replaces the factory insulating foam inside the door to help maintain internal temperature
• Reduces warm air infiltration that can cause frost or icing in the compartment
• Helps the appliance hold set temperature more consistently for food safety
• Common symptom: visible cold loss, excess frost, or a soft/compromised door core

• One door foam assembly

• Unplug the appliance and remove the door per the manufacturer's service instructions before replacing the foam
• May require door panel removal and handling of clips/adhesive—keep fasteners organized for reassembly
• Avoid puncturing the foam; handle gently and use recommended sealing/adhesive where specified