Parts for Ge PTS22SHSCRSS: 01 - Freezer Door Parts

The GE refrigerator water filter is an OEM replacement part responsible for ensuring the quality of the water dispensed on GE Profile top and bottom freezer refrigerators. It is responsible for purifying the water before it reaches your glass or ice maker, providing you with clean and safe drinking water directly from your refrigerator. To maintain optimal water quality and ensure the filter's effectiveness, it is recommended to replace the filter every 6 months or when the rated capacity of 750 gallons is reached.

Over time, the water filter can become clogged with sediment, reducing its effectiveness. Regular use and the accumulation of minerals and contaminants can lead to the need for replacement.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Ice cubes with an unusual taste or odor
• The filter indicator light staying on
• Visible particles in the water or ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. For the best performance, it is recommended to replace the water filter every six months or as indicated by the filter change light on your refrigerator.

This large door handle assembly replaces a worn, cracked, or broken refrigerator door handle to restore a secure grip and original appearance. It fits the factory mount points for a direct, like-for-like replacement. What it does:

• Provides a sturdy, finished handle for opening and closing the refrigerator door
• Replaces cracked, loose, or cosmetically damaged handles
• Restores original fit and alignment at the door mounting points
• Helps prevent accidental slips or difficulty opening the door caused by broken hardware

• Disconnect power to the appliance before starting work to avoid electrical hazard
• Use basic hand tools; support the door and handle during removal and installation to prevent damage
• Keep mounting screws and trim pieces organized for reassembly; do not overtighten fasteners
• If the handle has a finish or painted surface, handle carefully to avoid scratches

A stainless-steel handle fastener that secures the refrigerator door handle to the door assembly for a solid, wobble-free grip. Use to restore a loose, stripped, or missing handle attachment point. What it does:

• Secures the door handle to the door/handle mounting point so the handle stays tight and aligned.
• Stops handle movement, wobbling, or rattling caused by a worn or missing fastener.
• Replaces a corroded or damaged fastener to restore a secure connection.
• Stainless finish resists corrosion at the handle mounting point.

• Disconnect power to the appliance before starting work whenever access to internal parts is required.
• Use the correct screwdriver or bit; turn carefully and avoid sideways force on the handle.
• Do not overtighten—over-torquing can strip threads or crack surrounding trim.
• Keep removed hardware and any trim pieces for reassembly; inspect handle and threaded inserts for damage.

This freezer door gasket forms an airtight seal between the door and cabinet to keep cold air in and moisture out. Replacing a worn or damaged seal helps restore proper temperature, reduce frost, and improve energy efficiency.

• Seals the freezer door perimeter to maintain set temperature and airflow
• Helps reduce frost/ice buildup and condensation around the door opening
• May help if you notice warm spots, frequent frost, the door not staying shut, or visible gasket tears/gaps
• Reduces warm air infiltration that can cause long run times and temperature swings

• Unplug the refrigerator before servicing
• Warm the new gasket in hot tap water or with a hair dryer on low to make it pliable; seat the corners first
• Depending on the model, either press the gasket into the retainer channel or loosen and retighten inner-liner screws to secure—do not overtighten
• After installation, check the seal all around (dollar-bill test); gently warm and reshape any areas with gaps

This fixed mod shelf is a direct-fit freezer shelf assembly that restores storage stability and organization in compatible refrigerators. It replaces a broken or missing shelf so frozen items stay supported and accessible. What it does

• Provides a stable, stationary shelf surface for freezer storage.
• Replaces cracked, warped, or missing shelves that cause items to shift or fall.
• Restores original shelf spacing and support for proper organization.
• Helps prevent cold-air obstruction by maintaining intended shelf layout.

• One fixed mod shelf assembly.

• Unplug the appliance or disconnect power before installing.
• Remove food and any items from surrounding shelves before replacement.
• Installation typically involves aligning shelf supports and seating the shelf into place; basic hand tools may be helpful.
• Refer to the refrigerator owner's manual or service instructions for model-specific guidance and safe handling.

This replacement module shelf insert restores the shelf support that holds the refrigerator control module area and helps keep the shelf level and components secure. Fits into the module shelf to replace broken or missing inserts. What it does:

• Secures the control/module area so the module and wiring stay in place and out of direct contact with stored items
• Restores proper shelf alignment to prevent sagging or uneven loading
• Reduces rattling or noise caused by a loose or damaged shelf insert
• Helps protect the module area from minor impacts or shifting contents

• Disconnect power to the appliance before servicing to avoid electric shock.
• Remove the shelf or access panel per your owner's manual for clear access to the module shelf area.
• Snap or press the new insert into the designated slot until it seats firmly; verify fit and alignment.

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

This Mod tilt and insert (freezer) is the replacement tilt/insert mechanism used to secure and angle freezer inserts so they open and close smoothly. Restores proper positioning and support for the affected freezer insert. What it does:

• Holds and tilts the freezer insert/drawer to allow smooth opening and closing
• Keeps the insert properly aligned to prevent binding or uneven gaps
• Helps maintain consistent access to frozen items by stabilizing the drawer
• Addresses symptoms like a tilted, loose, or uneven freezer insert

• One Mod tilt and insert (freezer) part

• Basic hand tools may be required; follow manufacturer instructions for safe removal and replacement
• Disconnect power to the appliance before working on internal components
• Handle plastic parts gently to avoid cracking; confirm correct orientation before final fastening

This replacement screw fastens refrigerator components securely, restoring a tight, rattle-free fit when original hardware is missing, stripped, or corroded. Use it to secure panels, brackets, or trim and keep parts properly aligned.

• Secures panels, brackets, covers, or trim in place
• Helps maintain correct alignment of components and hardware
• Reduces vibration and rattling caused by loose or missing screws
• Replaces lost, rusted, or stripped screws

• Unplug the refrigerator and turn off water supply if working near water components
• Match thread and length to the removed fastener; hand-start threads to avoid cross-threading
• Tighten snugly; do not overtighten into plastic or thin sheet metal
• Keep track of any spacers or washers reused from the original assembly