Parts for Ge TPG24BRCGBS: 01 - Freezer Door Parts

Tubular fastener bushing for refrigerators. Secures and stabilizes internal components. Replace if cracked, broken, or missing to restore proper fit.

Size: 10-32 GXTT FLP.595 S

Replace your refrigerator's inner freezer door panel if cracked, warped, or damaged. This plastic liner installs inside the freezer door compartment.

The recessed grille tray sits behind the front grille at the bottom of the refrigerator and collects debris. Replace when the tray is cracked, warped, or missing, allowing dirt to accumulate in the compartment.

Fix water dispenser or ice maker not working with this refrigerator water inlet valve solenoid. Direct replacement part for restoring water flow control.

Manages startup delays and timing sequences for the refrigerator's compressor and defrost systems. Located behind the control panel or near the compressor, replacement is needed when the unit short cycles, fails to start, or has erratic cooling patterns.

The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.

• Holds the recess/ice door on its pivot within the dispenser assembly
• Helps the flapper close fully to seal the ice chute
• Restores smooth open/close action of the dispenser door
• Common symptoms: loose or fallen flapper, poor chute seal, frost or condensation in the dispenser area, and ice clumping near the chute

• Unplug the refrigerator before servicing the dispenser
• Carefully remove the dispenser bezel/control panel to access the ice chute door assembly
• Note spring orientation and retainer position; transfer components to the new retainer
• Verify flapper movement and seal before reassembly and restoring power

Color: Black.

Foam insulation recess for refrigerator interior. Replaces damaged, cracked, or missing insulation pieces in cabinet recesses and compartments.

Fix a light that won't turn on or flickers in your refrigerator. This E12 socket replacement is straightforward with our step-by-step video guide.

Ice dispenser door assembly seals the ice chute opening on your refrigerator. Replace if cracked, warped, or the rubber gasket is damaged and leaking air.

The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.

You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.

Symptoms of a bad ice door spring may include:

• Difficulty in opening or closing the ice chute door
• Ice dispensing issues, such as the door not opening when the dispenser is activated
• Cold air leakage from the ice chute area
• Ice buildup on the front of the icemaker

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Links the dispenser solenoid to the ice chute door in your refrigerator. Replace if the crank is broken, cracked, or worn, preventing proper closure.

Color: Black.

Color: Black.

Connects water supply tubing sections in your refrigerator. Replace this plastic compression union if it's cracked, leaking, or broken. Installs inline.

Size: 8-32 TT FL 1/2 S.

Includes 12 screws. Size: 8-18 ab.

6 - 10 pl flp 1/2 s

8 - 18 x .375

Package of 12

Freezer light not turning on or off? This door light switch activates interior lighting when opened. Moderate DIY repair—press tab, rotate out old switch.

Size: 10-16 ab.

Panel mounting screw for refrigerators. Secures access panels, trim pieces, and internal brackets. Replace lost, stripped, or corroded fasteners.

Replacement mounting screw for refrigerator panels, brackets, and hardware. Secures loose components and reduces rattling from missing or stripped screws.

Plastic cap that covers the corner hinge on your refrigerator freezer door. Replace if the original cap is cracked, broken, or missing for a complete look.

Bottom freezer drawer handle end cap for refrigerators. Replaces cracked, broken, or missing caps that cover the handle ends. Restores appearance.

This top trim piece finishes and protects the upper edge of the freezer door, restoring a clean factory appearance and helping keep the door seal area covered. Fits the freezer door top on compatible GE refrigerators. What it does:

• Covers and protects the top edge of the freezer door from dings, scratches and wear
• Restores a factory-finish appearance to the freezer door front
• Helps keep the door seal area neat and reduces gaps where debris can collect
• Useful when original trim is cracked, bent or cosmetically damaged

• Install with the refrigerator door closed and supported; remove and reinstall trim per OEM instructions
• Use appropriate fasteners/clips as required — replace any damaged clips for a secure fit
• Disconnect power only if required by your model for access; otherwise follow basic safety and use gloves to avoid sharp edges

Replacement mounting screw for your refrigerator. Secures components and panels inside the unit. Order a new screw if yours is stripped, missing, or damaged.