Parts for Whirlpool GI0FSAXVB00: 09 - Freezer Door Parts

The Water Filter is an OEM part for Whirlpool refrigerators. It is designed to filter and purify the water for your refrigerator, ensuring clean and fresh drinking water and ice.

A bad refrigerator water filter can be caused by regular use and the buildup of contaminants over time. It may also become less effective if not replaced according to the manufacturer's recommended schedule.

Symptoms of a bad refrigerator water filter include:

• A decrease in water flow or water pressure.
• An unpleasant taste or odor in the water.
• The presence of particles or sediment in the water.
• Cloudy or discolored ice cubes.

If you notice any of these signs or if it has been more than six months since your last filter replacement, it's time to replace the refrigerator water filter with this genuine OEM part. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This replacement door handle restores a secure grip and clean appearance to your appliance door. It's a direct-fit exterior handle designed to match original mounting points for easy replacement. What it does

• Provides a sturdy grip to open and close the appliance door safely and reliably
• Replaces worn, cracked, or discolored handles to improve appearance and function
• Helps keep the door sealing and alignment intact by restoring proper leverage and handling
• Fits the original mounting locations so no door modification is required

• One replacement door handle (exact hardware included when specified by OEM)

• Turn power or gas supply off if working near energized components; follow appliance safety instructions
• Remove existing handle by loosening visible screws or trim; retain any fasteners unless new hardware is supplied
• Align replacement handle with mounting holes and secure per OEM torque recommendations
• Test door operation after installation to confirm proper fit and alignment

Color: Black

Color: White

The Freezer Door Gasket is an OEM part for Whirlpool refrigerators. It provides a secure seal around the freezer door, helping to maintain the internal temperature and ensure efficient operation by preventing warm air from entering the freezer compartment.

You should replace the freezer door gasket if it becomes worn out, torn, or damaged. Causes of a bad door gasket can include general wear and tear, frequent opening and closing of the freezer door, or exposure to extreme temperatures. 

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• The freezer not maintaining a consistent temperature
• Increased energy consumption
• The freezer door not closing properly or sealing tightly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool screw is an OEM replacement part responsible for securely fastening various components and parts within Whirlpool appliances. These screws are essential for maintaining the structural integrity and safe operation of the appliance. These screws hold together critical components like panels, brackets, handles, and internal parts.

This part fixes the following symptoms:

• Loose or wobbly handles on refrigerators, ovens, or other appliances
• Vibrations or rattling noises during appliance operation
• Inability to assemble or disassemble parts during appliance repair or maintenance

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This replacement freezer bin restores a missing, cracked, or worn freezer storage drawer so you can keep frozen foods organized and contained. Fits behind the freezer door and rehabs normal shelf/drawer function. What it does:

• Holds and organizes frozen food items inside the freezer compartment
• Replaces cracked, broken, or warped drawer bins that no longer slide or seal
• Helps prevent items from falling onto lower shelves and improves access
• Compatible with oven/freezer drawer tracks and slides used by the OEM design

• Remove all contents and unplug or switch off the appliance power before service
• Slide out existing bin and lift to disengage; align new bin on tracks and slide into place
• Inspect rails and guides for damage; replace any damaged hardware separately

This mounting bracket secures internal components to the appliance chassis to keep parts aligned and reduce movement during operation. It restores stable support so attached parts function reliably and quietly. What it does:

• Secures a component or assembly to the appliance frame to prevent shifting or sagging
• Maintains proper alignment of parts for reliable operation
• Helps reduce vibration and noise caused by loose or unsupported components
• Worn or broken brackets can cause rattling, misalignment, or intermittent part failures

• One mounting bracket

• Disconnect power before servicing to avoid electrical shock
• Use appropriate hand tools; keep fasteners for reinstallation unless new ones are specified
• Inspect surrounding components and mounting hardware; replace any stripped or damaged screws

This replacement bracket provides a secure mounting point for a designated component in your appliance. It keeps parts properly supported and aligned, helping the unit operate smoothly without vibration or shifting.

• Supports and anchors a specific part or assembly in the correct position
• Helps prevent vibration, rattling, and premature wear from movement
• Maintains alignment for consistent, reliable operation
• Replace if bent, cracked, or missing; symptoms can include loose components or unusual noise

• Disconnect power; shut off water or gas supply if applicable
• Access the bracket location per your model's service information and note the original orientation
• Transfer any screws, clips, or grommets from the old bracket to the new one
• Tighten fasteners evenly and verify alignment before restoring power

This freezer upper drawer glide replaces the worn slide that guides the upper freezer basket in and out. Restores smooth, aligned drawer movement and reduces binding or scraping caused by a cracked or damaged glide. What it does:

• Supports and guides the upper freezer basket/drawer for smooth travel
• Helps keep the drawer aligned to prevent binding or coming off track
• Replaces cracked, worn, or broken glide rails that impede movement
• Typical symptoms include stiff opening/closing, jamming, scraping noises, wobble, or visible damage

• 1 upper freezer drawer glide

• Disconnect power before servicing; remove food and freezer baskets
• Pull the drawer out and remove fasteners/clips securing the glide; note orientation
• Transfer any stops/spacers from the old glide as needed and reuse existing hardware
• Secure the new glide, reinstall the drawer, and test for smooth operation

This left-side slide bracket secures and guides a sliding assembly so drawers or components open smoothly and stay aligned. It replaces a worn or broken bracket to restore proper support and reduce binding or sagging. What it does:

• Provides structural support for the left side of a sliding drawer/assembly
• Keeps slides aligned so the drawer opens and closes smoothly
• Helps stop sagging, catching, or uneven movement of the sliding part
• Replaces cracked, bent, or damaged brackets that interfere with operation

• Disconnect power and/or unplug the appliance before starting any repair
• Remove any outer panels or drawer components as needed to access the bracket
• Keep original fasteners; install bracket in the same orientation and tighten screws securely but do not overtighten
• If movement still feels restricted after replacement, check mating slide components and alignment

Color: For white, black and bisque models.