Parts for Electrolux EI23BC35KB3: 03 - Freezer Drawer - Basket Parts

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

NOTE - Due to manufacturer changes gasket is only available in light grey and may differ from the photo shown.

Replacement door handle for your refrigerator. Installs on the exterior door surface. Needed when the original handle is cracked, broken, or missing.

Mounting screw for refrigerator interior or exterior components. Replace if missing, stripped, or corroded to secure panels, brackets, or parts.

Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Wire freezer basket installs in the freezer compartment to organize frozen foods. Replace a cracked, broken, or missing basket to restore storage space.

Plastic storage basket that organizes items in the freezer drawer. Replace if cracked, broken, or missing to restore proper food organization.

Replacement clip secures refrigerator storage baskets in place. Needed when the original clip is cracked, broken, or missing, causing baskets to shift.

This slide set replaces the right- and left-hand rails that guide and support a drawer or rack. It restores smooth, aligned movement so the assembly opens and closes easily without sticking, wobbling, or jumping off the track.

• Guides and stabilizes the drawer/rack on both sides for smooth travel
• Maintains alignment to reduce binding, uneven movement, and premature wear
• Replaces worn, bent, or broken slides that affect operation
• Common symptoms: sticking, rough/grinding movement, tilt or sag, popping off track, hard to open/close

• Disconnect power; shut off gas/water. Remove the drawer or rack before servicing.
• Note L/R orientation; remove old slides and reuse existing screws/brackets.
• Install new slides in the same positions; ensure they are fully seated and aligned.
• Test movement several times before returning the appliance to service; wear cut-resistant gloves.

This slide set replaces the right- and left-hand rails that guide and support a drawer or rack. It restores smooth, aligned movement so the assembly opens and closes easily without sticking, wobbling, or jumping off the track.

• Guides and stabilizes the drawer/rack on both sides for smooth travel
• Maintains alignment to reduce binding, uneven movement, and premature wear
• Replaces worn, bent, or broken slides that affect operation
• Common symptoms: sticking, rough/grinding movement, tilt or sag, popping off track, hard to open/close

• Disconnect power; shut off gas/water. Remove the drawer or rack before servicing.
• Note L/R orientation; remove old slides and reuse existing screws/brackets.
• Install new slides in the same positions; ensure they are fully seated and aligned.
• Test movement several times before returning the appliance to service; wear cut-resistant gloves.

This is a small roller wheel or gear that supports and guides the freezer drawer as it slides in and out. It attaches to the drawer frame or track to allow smooth operation. Replace this part if the freezer drawer is difficult to open or close, makes grinding noises, or sits unevenly on its tracks.

This is a small plastic wheel support or gear clip that attaches to the freezer drawer glide system. It helps the freezer drawer slide smoothly on its tracks by supporting the roller wheel mechanism. Replace this part if your freezer drawer is difficult to open or close, makes grinding noises, or sits unevenly on its rails.

Replace your refrigerator's door rack if it's cracked, broken, or missing. This storage rack installs on the interior door to hold bottles and condiments.

Plastic divider that organizes and separates items inside refrigerator drawers. Replaces cracked, broken, or missing dividers in crisper or deli drawers.

Freezer compartment divider for bottom-mount refrigerators. Replaces cracked, broken, or missing dividers that separate freezer sections.

Plastic divider that organizes and separates items inside your refrigerator freezer drawer. Replace if cracked, broken, or missing to restore compartment.

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

Structural rail that supports refrigerator shelves and pantry drawer assemblies. Replace if cracked, broken, or missing to restore level support.

Structural cabinet brace that stabilizes your refrigerator's interior frame. Replace if cracked, bent, or broken to restore proper alignment of doors.

This is a support bar that reinforces and stabilizes a drawer or door shelf inside the refrigerator. It helps keep the drawer properly aligned on its tracks and prevents sagging under the weight of stored items. Replace this part if the drawer tilts, slides unevenly, or if the original support bar is cracked or broken.

This replacement magnet is used in select refrigerator assemblies. It provides the magnetic hold or sensor trigger required so doors, flaps, or rails stay closed and so the controls can accurately detect when components are in position.

• Supplies magnetic retention in the specified assembly to keep parts closed and aligned
• Activates magnetic reed sensors in models that use them for door/position detection
• Weak or missing magnets can lead to door-ajar alerts, air leaks, or components not staying shut
• Visible damage or incorrect orientation can cause intermittent operation or improper sealing

• Disconnect power before servicing; turn off water if working near the dispenser
• Use your model's parts diagram to locate the magnet and note its orientation/polarity
• Press-fit into its holder carefully; do not chip or crack the magnet
• Verify proper closure/sensing operation before returning the appliance to service

Secures and supports the freezer drawer in your refrigerator, keeping it aligned and stable. Replace this bracket if yours is broken, cracked, or worn.

Support bar for refrigerator freezer drawer assembly. Installs between roller tracks to stabilize drawer and prevent shifting. Replace if broken or missing.

This is a small plastic cover that fits over the pinion gear mechanism on the freezer drawer slide rail. It protects the glide assembly from debris and helps the drawer open and close smoothly. Replace this cover if your freezer drawer is sliding roughly, making unusual noises, or if the original cover is cracked or missing.

Replaces a cracked, broken, or missing water dispenser paddle actuator on your refrigerator door. Installs in the dispenser housing control area.

Controls airflow between refrigerator compartments by operating the air damper door. Replace if damper is stuck, broken, or fails to regulate temperature.

Replaces worn, cracked, or missing basket trim on refrigerator baskets. Restores the finished edge and secure fit to prevent rubbing and damage.

3/32" blade screwdriver for accessing and adjusting small screws on appliance control panels and trim. Essential for maintenance and repairs.

Lock pin that secures refrigerator drawers and shelves in place. Replace if the pin is broken, missing, or won't hold drawer components securely anymore.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances

Mounting screw for refrigerator panels, handles, and internal components. Replace stripped, corroded, or missing screws to secure assemblies properly.

Rubber door bumper cushions refrigerator door closure to reduce noise and protect cabinet finish. Replace if cracked, missing, or worn from repeated use.

Replace a stripped, missing, or damaged set screw that secures refrigerator or freezer door handles. Requires 3/32" allen wrench for installation.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.