Parts for Crosley CFD28SDQSA: Freezer Drawer, Baskets Parts

The Refrigerator Door Gasket is an OEM replacement part for Frigidaire refrigerators. It forms a seal around the refrigerator door, keeping cold air inside and preventing warm air from entering. This helps maintain consistent temperatures inside the appliance, ensuring optimal food preservation and energy efficiency.

Causes of a bad gasket can include regular wear and tear, exposure to temperature fluctuations, or damage from cleaning agents. Over time, the gasket may lose its elasticity or develop cracks, compromising the refrigerator's seal and performance.

Symptoms of a bad gasket include:

• Difficulty in keeping the refrigerator door closed securely
• Excess condensation or frost buildup inside the refrigerator
• Warm spots or inconsistent cooling in the appliance
• Increased energy usage due to the refrigerator running more frequently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement drawer is the interior storage bin that holds and organizes food items inside the refrigerator or freezer, restoring lost storage and proper fit when the original drawer is cracked, broken, or missing. What it does

• Replaces a damaged or missing interior storage drawer so food can be contained and organized
• Slides into the cabinet on existing rails or glides to open and close storage space
• Prevents direct contact between stored items and cabinet interior surfaces
• Commonly used when the original drawer is cracked, warped, chipped, or will not stay in place

• One storage drawer

• Remove all food and empty the old drawer before replacing
• Slide the drawer out along the rails to disengage; align and seat the new drawer on the same rails when installing
• Inspect rails or glide components for damage and replace them separately if worn
• No specialized tools required for most installations; follow manufacturer instructions and disconnect power if needing to move or tip the appliance

This refrigerator door handle restores a solid, comfortable grip and a clean look when the original handle is cracked, loose, or missing. Replace worn handles to keep everyday opening and closing smooth and secure.

• Provides the handhold needed to open and close the refrigerator or freezer door
• Replaces handles that are cracked, broken, loose, or missing
• Helps address wobbling or stripped handle mounting points
• Useful when the door is difficult to open due to a damaged handle

• Disconnect power before beginning any repair
• Support the handle while removing set/mounting screws with the correct driver (Torx/Allen/Phillips varies by model)
• If your model uses end caps or brackets, transfer them from the old handle to the new one
• Align and snug fasteners without overtightening; secure fit and alignment

Replacement screw used to secure trim, brackets and panels on compatible Frigidaire appliances. Restores proper fit to reduce rattling and keep components from coming loose for safer, more reliable operation. What it does

• Secures panels, trim pieces and small brackets so parts stay aligned and flush.
• Stops rattling or vibration caused by missing or loose fasteners.
• Prevents components from shifting or falling out during normal use.
• Works wherever the OEM screw specified by the appliance diagram is required.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct driver and size to avoid stripping the head or threads.
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic.
• If the new screw does not seat properly, confirm this is the correct OEM part before forcing it.

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

A single replacement mounting screw used to secure trim, panels, or components on compatible Frigidaire appliances. Restores a lost or stripped fastener so panels and parts sit firmly and safely. What it does

• Secures trim pieces, control panels, brackets, or small appliance components
• Replaces missing or damaged screws that cause loose or rattling parts
• Helps restore proper alignment so doors and panels close and seal correctly
• Useful when reassembling after maintenance or part replacement

• Inspect matching hole and threads; replace with like-size screw to avoid damage
• Use correct screwdriver or driver bit to prevent stripping the head
• Do not overtighten; snug until secure
• Disconnect power to the appliance before accessing internal panels or components

This wire freezer basket provides a removable storage bin for organizing frozen foods and maximizing usable freezer space. It replaces a broken, missing or warped basket so items stay contained and accessible. What it does:

• Holds and organizes frozen food items to prevent clutter and make retrieval easier
• Slides or lifts out for convenient loading, unloading and cleaning
• Stops items from falling into lower compartments or vents
• Restores secure storage when original basket is cracked, bent or missing

• One wire freezer basket

• Typically installs without tools—lift into place on freezer rails or hooks;
• Handle edges carefully to avoid pinches; wear gloves if needed
• Verify fit and orientation before loading heavy items
• If freezer shelves or rails are damaged, replace them first to ensure proper basket support

This replacement freezer basket provides an easy way to organize and access frozen foods inside the freezer compartment. It restores usable storage space and keeps items contained for neater, more efficient freezing. What it does:

• Holds and organizes frozen food items to prevent shifting and stacking
• Slides or lifts into the freezer compartment for easy access to contents
• Helps improve visibility so you can find items faster
• Works as a direct-fit replacement for the matching factory basket when the old one is cracked or damaged

• One freezer basket

• Remove food and shelves as needed for clear access before installing
• Slide or set the basket into the freezer compartment until it seats securely
• Do not force into place; check orientation and positioning of rails or ledges
• For safety, unplug the appliance or disconnect power before working inside the freezer

This replacement retainer clip secures trim, panels or small components inside your appliance to restore proper fit and reduce rattling. A simple, low-cost part commonly used where plastic or metal pieces need a secure hold. What it does:

• Holds panels, trim pieces or small assemblies in place to prevent shifting and vibration.
• Helps stop rattling, loose trim or components that don't stay seated.
• Keeps wiring or hoses routed and restrained when used as a harness/route clip.
• Suitable when original clip is cracked, broken or missing.

• Disconnect power to the appliance before beginning any work.
• Remove surrounding trim or panels gently to access the clip location; a trim tool or small screwdriver may be helpful.
• Clip installs by pressing into the mating slot or hole until it snaps; pliers may assist for removal/replacement.
• Verify correct orientation and fit by comparing the new clip to the old one before final reassembly.

The Screw is an OEM part for Frigidaire refrigerators. As a common fastener used throughout the appliance, screws hold panels, handles, components and more securely in place. Reliable performance depends on intact assemblies.

Causes of a bad screw can include wear and corrosion over time from constant vibration, as well as stripping or shearing from repeated securing and removal of parts during repairs.

Symptoms of a loose, damaged, or missing screw include:

• Rattling noises and vibration
• Doors, handles, or panels that are no longer flush or tightened securely
• Internal components that have shifted position

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Slide Assembly is an essential OEM component for Frigidaire refrigerator drawers. It provides smooth extension and retraction of covered storage bins during access.  

Symptoms of a faulty slide assembly include:

• Squeaking or rubbing noises coming from drawer rails   
• Difficulty smoothly pulling out covered bins
• Scratches or gouges visible along wear surfaces

Causes involve years of constant sliding stresses overwhelming lubrication, leading to increased friction. Without smooth gliding, premature deterioration of plastic drawer supports results.

This authentic OEM replacement is compatible with Frigidaire, Electrolux, and Kenmore models.

The Slide Assembly is an OEM part for Frigidaire refrigerators. It secures crisper and pantry bins within the refrigerator interior, providing gliding functionality for easy access to stored items.

Causes of a bad slide assembly can include loose or broken mounting features, damaged rollers, or bent metal rails failing to guide bins smoothly. 

Symptoms of a bad slide assembly include:

• Difficulty removing or replacing crisper/pantry bins  
• Bins failing to close fully or stay securely in place
• Loud squeaking or grinding noises developing
• Dislodged mounting screws or loose mounting points

Replacing with this OEM slide assembly restores smooth operation. It is purpose-built to support everyday use without degradation.

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace before further component wear develops.

This slide assembly replaces a worn or damaged drawer glide to restore smooth, stable drawer movement and proper alignment. It helps drawers open and close without sticking or falling out. What it does:

• Guides and supports a refrigerator or freezer drawer for smooth sliding action
• Prevents drawers from binding, sagging, or coming off the track
• Reduces noise and uneven movement caused by a damaged glide
• Restores proper drawer alignment for secure storage

• Unplug the appliance or disconnect power before starting any repair
• Empty the drawer and remove it according to the appliance's service instructions
• Retain and reuse any factory screws or clips unless replacements are specified
• Install orientation must match the original part; test drawer movement before returning contents

The Slide Assembly is an essential OEM component for Frigidaire refrigerator drawers. It provides smooth extension and retraction of covered storage bins during access.  

Symptoms of a faulty slide assembly include:

• Squeaking or rubbing noises coming from drawer rails   
• Difficulty smoothly pulling out covered bins
• Scratches or gouges visible along wear surfaces

Causes involve years of constant sliding stresses overwhelming lubrication, leading to increased friction. Without smooth gliding, premature deterioration of plastic drawer supports results.

This authentic OEM replacement is compatible with Frigidaire, Electrolux, and Kenmore models.

This retainer is a small mounting clip that secures internal components and trim to keep panels and assemblies aligned during normal use. It restores secure fitment and reduces movement or rattling from loose parts. What it does:

• Holds panels, trim, or small assemblies in place to prevent shifting and vibration
• Helps stop rattling or buzzing caused by loose internal components
• Keeps parts aligned so doors, drawers, or panels operate smoothly
• Replaces cracked, broken, or worn clips that no longer grip reliably

• Disconnect power to the appliance before inspecting or replacing parts
• Remove surrounding panels or trim as needed to access the retainer; keep screws/fasteners for reassembly
• Snap the clip into the mating slot or tab until it seats; replace any damaged mounting points
• Replace all adjacent clips for consistent fit

This part number contains one (1) screw.

The Door Handle Screw is an OEM part for Frigidaire refrigerators. This screw secures the door handle to the refrigerator door, ensuring a firm and stable grip for opening and closing the door.

Causes of a bad door handle screw can include regular wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or stripping. A faulty screw can lead to a loose or wobbly door handle, making it difficult to operate the refrigerator.

Symptoms of a bad door handle screw include:

• The door handle feeling loose or coming off
• Difficulty in securely tightening the handle
• Visible rust or corrosion on the screw
• Stripped threads on the screw or handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This OEM-style refrigerator shelf divider keeps items separated and organized so groceries stay in place and drawers/shelves stack neatly. It replaces a cracked, warped, or missing divider to restore proper storage separation. What it does:

• Separates food and containers to prevent shifting and contact between items
• Restores intended shelf/drawer organization and usable space
• Helps keep contents from sliding when doors open or close
• Useful when the original divider is cracked, broken, or missing

• One replacement divider

• High-level replacement: remove the shelf or drawer as needed, align the divider in its mounting slots, and press into place
• Use caution handling glass shelves or sharp edges; wear gloves to protect hands
• Check fit and alignment before returning contents to avoid interference with door or drawer movement
• If mounting clips or tracks are damaged, replace those parts rather than forcing the divider

This interior divider separates and organizes items on a refrigerator shelf or inside a drawer so food stays orderly and doesn't shift during normal use. It restores the original partitioning function of the compartment. What it does:

• Provides a stable partition to separate foods and containers
• Keeps items from sliding together or tipping when the door or drawer is opened
• Replaces cracked, warped or missing dividers that no longer hold position
• Restores intended organization and usable space of the shelf/drawer

• Fits into the shelf or drawer track; no tools generally required for removal or reinstallation
• Inspect surrounding clips or tracks for damage and clean area before installing
• Handle gently to avoid cracking the plastic; align tabs and press until secure

This support beam is a structural cabinet brace that stabilizes the refrigerator's interior frame and restores proper alignment of doors, drawers and shelves, helping reduce sagging, vibration and unusual noises. What it does:

• Reinforces the cabinet/frame so internal components stay square and aligned
• Helps prevent doors and drawers from sagging or binding
• Reduces rattling or vibration caused by a bent or missing brace
• Common symptom indicators: visible bend or gap, uneven door fit, or persistent noise from the cabinet area

• Disconnect power and remove food/contents from the affected area before starting any repair
• Basic hand tools typically required; follow the manufacturer's service manual for correct fastener torque and placement
• Handle carefully to avoid scratching the finish; inspect surrounding mounting points and replace damaged fasteners as needed

This door handle bar lets you grip and open the appliance door smoothly. It restores a secure, comfortable handle when the original bar is loose, worn, or damaged, helping the door operate as intended.

• Provides a sturdy handhold to open and close the door
• Replaces a loose, cracked, or missing handle bar
• Helps ensure proper door operation and user safety
• Cosmetic refresh for a worn or scuffed handle area

• Unplug the appliance before servicing
• Use the correct screwdriver/hex driver per your model's fasteners
• Support the door while loosening and tightening handle screws
• Do not overtighten; align and snug evenly to avoid damage

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement bar is a direct-fit support component that helps hold and stabilize a refrigerator door or interior shelf assembly, restoring secure storage and preventing items from shifting or falling. What it does

• Provides structural support for a door or shelf ledge to keep stored items secure
• Replaces bent, cracked or broken bars that allow shelves or door bins to sag
• Helps stop rattling or movement from loose or damaged supports
• Restores proper alignment so shelves and bins sit flush and stable

• One replacement bar

• Disconnect power before removing refrigerator doors or interior components when necessary
• Remove affected shelf or bin to access mounting points
• Use basic hand tools; avoid overtightening fasteners to prevent cracking plastic parts
• Handle glass shelves and door bins carefully during removal and reassembly

This replacement basket trim restores the finished edge and secure fit of a dishwasher basket, helping prevent rubbing and keeping dishes positioned for proper cleaning. It replaces worn or cracked trim for a neater, safer rack. What it does:

• Covers and protects the edge of a dishwasher basket to reduce wear and snagging
• Helps keep the basket aligned and items from catching on the rack
• Restores a finished appearance to a worn or damaged basket edge
• Simple, passive part that prevents small movement and chipping of dishware

• One basket trim piece

• Disconnect power and water to the appliance before starting any repair
• Most trims snap or slide onto the basket; remove the rack to access the damaged area
• Use basic hand tools if clips or screws are present; avoid forcing parts to prevent breakage
• If clips are broken, inspect neighboring fasteners and replace as needed for a secure fit

This 3/32" screwdriver is the service tool used to access and adjust small screws on appliances, making routine panel and control adjustments easier and more precise. Handy for basic repairs and maintenance. What it does:

• Fits 3/32" slotted screws commonly found on control panels, trim, and small fasteners
• Allows removal and installation of small service screws for access to internal components
• Helps correct loose screws that can cause rattling or misaligned panels
• Provides better fit than oversized drivers to reduce screw head damage

• Always disconnect power to the appliance before performing service or repairs
• Use the correct 3/32" blade size to avoid stripping screw heads
• Apply steady pressure and avoid excessive torque; use hand force only unless otherwise specified

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed