Parts for Electrolux EW28BS71ISC: 03 - Freezer Drawer / Baskets Parts

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

NOTE - Due to manufacturer changes gasket is only available in light grey and may differ from the photo shown.

Replacement door handle bar for your refrigerator. Installs on the door to provide a sturdy grip. Needed when original is loose, cracked, or damaged.

Replace your broken or cracked refrigerator door handle. This exterior handle installs on the door to provide a grip for opening and closing your unit.

Mounting screw for refrigerator interior or exterior components. Replace if missing, stripped, or corroded to secure panels, brackets, or parts.

Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Secures refrigerator and freezer door handles to the door. Replaces lost, stripped, or missing screws during handle installation or replacement.

Replace your broken or cracked refrigerator freezer basket. This storage basket installs in the freezer compartment to organize frozen items.

Complete slide assembly for refrigerator freezer drawer baskets. Replaces broken or worn plastic housing and metal rails for smooth gliding action.

Replace worn or broken freezer drawer slide rails. Restores smooth gliding and proper alignment. Includes left and right side guides for bottom-mount units.

Complete slide assembly for refrigerator freezer drawer baskets. Replaces broken or worn plastic housing and metal rails for smooth gliding action.

Replace worn or broken freezer drawer slide rails. Restores smooth gliding and proper alignment. Includes left and right side guides for bottom-mount units.

Replacement drive gear for bottom-mount refrigerators. Restores smooth motion transfer between internal components. Order when original is cracked or worn.

Secures items on your refrigerator door shelf, preventing bottles and containers from sliding out. Replace when cracked, broken, or missing.

Plastic divider that separates compartments inside your refrigerator. Replace if cracked, broken, or missing to restore proper organization.

Plastic shelf divider that organizes items in your refrigerator compartment. Replace if cracked, broken, or missing to restore proper food separation.

This door shelf retainer is the trim bar that secures items in a refrigerator door bin, restoring a secure front edge so bottles and containers stay in place. It replaces a cracked, broken or loose retainer to keep door storage functional. What it does:

• Holds items in the refrigerator door bin by forming the front retaining edge
• Replaces a worn, cracked or broken trim bar that lets items fall from the door
• Snaps into the door bin mounting slots to restore shelf stability
• Compatible with top/bottom door bins where the original retainer is used

What's included: One door shelf retainer bar Install notes:

• High-level task: remove all items from the door bin before replacing the retainer
• Typically snaps out of the bin's mounting slots and snaps into place for the new retainer; no special tools required for many models
• Disconnect power only if working near electrical components; this is a cabinet-level service only
• Wear gloves to avoid sharp edges on broken plastic and to protect the new part during installation

Refrigerator door won't stay closed or sensor not detecting position? This magnet restores magnetic hold for doors, flaps, and rails in select models.

Tilt-out door rack for refrigerator that holds small items with forward-tilting access. Replace if cracked, broken, or no longer secures items properly.

Secures and supports the freezer drawer in your refrigerator, keeping it aligned and stable. Replace this bracket if yours is broken, cracked, or worn.

Support bar for refrigerator freezer drawer assembly. Installs between roller tracks to stabilize drawer and prevent shifting. Replace if broken or missing.

Plastic end cap that covers the end of refrigerator shelf support bars. Replace if cracked, broken, or missing to restore a finished look.

Door rack end cap for refrigerators. Installs on the end of door storage racks to secure and finish the assembly. Replace if cracked, broken, or missing.

Internal lever that connects the dispenser paddle to the switch mechanism in your refrigerator door. Replace if broken, cracked, or missing for firm paddle.

Replaces a cracked, broken, or missing water dispenser paddle actuator on your refrigerator door. Installs in the dispenser housing control area.

Controls airflow between refrigerator compartments by operating the air damper door. Replace if damper is stuck, broken, or fails to regulate temperature.

3/32" blade screwdriver for accessing and adjusting small screws on appliance control panels and trim. Essential for maintenance and repairs.

Replacement door guide for bottom-mount refrigerators. Installs on door hinge assembly to align door movement. Replace if cracked, broken, or worn.

Lock pin that secures refrigerator drawers and shelves in place. Replace if the pin is broken, missing, or won't hold drawer components securely anymore.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances

Mounting screw for refrigerator panels, handles, and internal components. Replace stripped, corroded, or missing screws to secure assemblies properly.

Fixes loose panels and rattling noises in refrigerators. This mounting screw secures panels and trim to restore proper fit and eliminate movement.

Rubber door bumper cushions refrigerator door closure to reduce noise and protect cabinet finish. Replace if cracked, missing, or worn from repeated use.

Replace a stripped, missing, or damaged set screw that secures refrigerator or freezer door handles. Requires 3/32" allen wrench for installation.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.