Parts for Kenmore 795.75042610 (79575042610, 795 75042610): Freezer Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

A replacement freezer tray that restores a level, secure surface for frozen foods and helps contain spills in the freezer compartment. Fits where the factory storage pan has cracked, warped, or failed. What it does:

• Provides a flat, durable surface to hold frozen foods and packages
• Contains minor spills to help keep the freezer interior cleaner
• Replaces cracked, warped or broken freezer pans that no longer seat properly
• Helps maintain organized storage and prevents items from shifting

• Disconnect power to the appliance before any service to avoid electrical hazards
• Remove food, shelves, and drawers that block access to the tray area
• Slide or snap the tray into place; do not force—verify it seats securely and level

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

The Drawer Tray Assembly is an OEM part for LG French door refrigerators. It consists of the removable tray and frame that make up the refrigerator's freezer drawer storage compartment. The tray assembly is designed to provide organization and easy access to frozen items tucked away in the bottom drawer.

Symptoms of a bad drawer tray assembly include:

• Difficulty opening or closing the freezer drawer  
• Noisy drawer operation
• Cracked or broken tray ledges
• Poor seal allowing cold air leakage

Causes can be normal wear and tear over time, or damage from accidentally dropping heavy items or forcing a stubborn drawer.

This genuine LG tray assembly is also compatible with some Kenmore French door freezers.

This drawer tray assembly is the platform that supports a refrigerator storage drawer and guides it along the slides. Replacing a cracked or damaged tray restores smooth operation, proper alignment, and dependable support for your food items.

• Supports the drawer bin and its contents inside the compartment
• Interfaces with the slide/rail system for smooth in-and-out travel
• Helps maintain proper alignment so the drawer opens and closes fully
• Common symptoms: cracked or broken tray, broken tabs, wobbling drawer, sticking/binding, or difficulty closing

• Disconnect power and empty the drawer before service
• Remove the drawer per your model's instructions; release tabs or screws securing the tray
• Position the new tray, ensuring tabs/rollers seat correctly; reinstall any fasteners
• Reinstall the drawer and check for smooth travel before reloading

The Drawer Tray Assembly is an OEM part for LG French door refrigerators. It consists of the removable tray and frame that make up the refrigerator's freezer drawer storage compartment. The tray assembly is designed to provide organization and easy access to frozen items tucked away in the bottom drawer.

Symptoms of a bad drawer tray assembly include:

• Difficulty opening or closing the freezer drawer  
• Noisy drawer operation
• Cracked or broken tray ledges
• Poor seal allowing cold air leakage

Causes can be normal wear and tear over time, or damage from accidentally dropping heavy items or forcing a stubborn drawer.

This genuine LG tray assembly is also compatible with some Kenmore French door freezers.

This guide assembly restores smooth, stable sliding for a freezer/refrigerator drawer or shelf track so drawers open and close without catching or falling out of alignment. It replaces worn or broken rails that cause noisy or rough operation. What it does

• Provides the sliding track and mounting interface that guides a drawer or shelf along its travel
• Replaces cracked, bent, or worn rail sections that cause sticking, misalignment, or dropped drawers
• Restores proper engagement so drawers slide smoothly and stay securely supported
• Helps eliminate scraping, grinding, or noisy movement from damaged guide hardware

• One guide assembly

• Disconnect power to the appliance before servicing to avoid injury
• The part number matches the existing rail before installation
• Basic hand tools are typically required; keep fasteners for reuse unless replacement provided
• Follow OEM instructions for removal and reassembly to ensure correct alignment and function

This rail guide assembly restores smooth, stable sliding for a refrigerator or freezer drawer. It supports the drawer track so the drawer opens and closes without sticking, binding, or misaligning. What it does:

• Guides and supports the drawer on its track for consistent movement
• Keeps the drawer aligned to prevent binding and uneven wear
• Reduces noise and rough operation caused by a damaged or worn rail guide
• Helps prevent the drawer from coming off the track during normal use

• Disconnect power to the appliance and remove the drawer per the manufacturer's instructions before installing
• Inspect surrounding track and mounting points; replace any broken clips or fasteners
• Hand-fit the guide first, then secure hardware without over-tightening to avoid cracking plastic parts
• Test drawer travel after installation to ensure smooth, full-range movement

This rail connector secures a slide rail to its mounting point, keeping the rail aligned and stable so the assembly moves smoothly. Replace a cracked, worn, or missing connector to restore proper tracking and support.

• Joins the slide rail to its bracket or panel to maintain alignment and support
• Helps the rail travel smoothly without binding or coming off track
• Replaces broken, warped, or missing connectors that allow rails to loosen
• Typical signs of failure: rail separates, wobbles, sags, or won't stay engaged

• Disconnect power to the appliance; remove items to access the rail safely
• Remove the drawer/shelf and rail as needed to reach the connector
• Release locking tabs or fasteners, transfer the rail to the new connector, and seat it fully
• Reinstall components and test for smooth travel; wear gloves to protect hands from sharp edges

This connector joins two sections of the refrigerator's water tubing to create a secure, leak-resistant seal. Replace a cracked or loose connector to restore proper water flow to the dispenser and ice maker.

• Provides a sealed union between two water tubes in the appliance's water system
• Helps prevent air and water leaks that can impact dispenser and ice maker performance
• Typical failure signs include drips or puddles near the connection, visible seepage, or moisture alerts
• Also causes low/no dispenser flow or small or hollow ice cubes

• Disconnect power and shut off the water supply; dispense water to relieve line pressure
• Prepare tubing with a clean, square cut; insert each tube fully into the connector until seated, then pull-test to retention
• Restore water and check all joints for leaks; purge air by dispensing water before normal use

This slide rail supports and guides a refrigerator drawer so it opens and closes smoothly. Replacing a worn or cracked rail restores proper alignment and glide to prevent bins from binding, tilting, or popping out of the track.

• Provides the track the drawer/bin slides on
• Maintains drawer alignment and supports the bin during use
• Helps ensure smooth, even travel in and out
• Common failure signs: drawer hard to open/close, crooked or sagging bin, drawer comes off track, visible cracks or damage to the rail

• Disconnect power and remove the affected drawer/bin before starting.
• Remove screws securing the old rail; install the new rail in the same position and orientation.
• Transfer any reusable stops/caps from the original rail if applicable.
• Reinstall the drawer and verify smooth operation before reloading.

This drawer guide is the plastic slide that supports and guides a freezer or refrigerator drawer for smooth, stable opening and closing. It replaces a worn or broken guide to reduce sticking, sagging, and drawer misalignment. What it does:

• Supports the drawer on its track so the drawer opens and closes smoothly
• Keeps the drawer aligned to prevent binding, scraping, or uneven movement
• Restores proper engagement with the drawer slide to stop sagging or partial drops
• Helps reduce noise and wear caused by a damaged or missing guide

• Disconnect power or unplug the appliance before accessing interior components
• Remove the drawer and any contents or glass shelves first to avoid breakage
• Typically secures with simple clips or a few screws; do not force parts—line up tabs before seating
• If metal parts are bent or the mating slide is damaged, inspect both sides and replace as needed

This rail holder is a small mounting bracket that secures a sliding rail or shelf rail inside the appliance, restoring stable support and proper alignment for the rail assembly. It's a direct-replacement style part used where a broken or worn bracket allows the rail to sag or detach. What it does:

• Secures the end of a sliding shelf or drawer rail to the appliance frame for stable movement
• Restores proper alignment when a rail droops, binds, or pulls away from its mounting point
• Prevents the rail from disengaging or falling during use
• Works with the original rail assembly to maintain smooth in-and-out travel

• One rail holder / rail mounting bracket (quantity: 1)

• Disconnect power (or unplug appliance) before starting work and allow any hot surfaces to cool
• Basic hand tools (screwdriver or nut driver) may be required; keep fasteners for reuse unless new ones are provided
• Handle edges carefully; support the rail/shelf while removing or installing the holder to avoid drops or damage

This rail holder is a small mounting bracket that secures a sliding rail or guide to the appliance, restoring smooth movement and proper alignment. It's a direct-fit replacement designed to replace worn or broken rail supports. What it does:

• Secures and supports a sliding rail or guide so drawers/doors move smoothly
• Prevents rail movement that can cause rubbing, sticking, or uneven travel
• Restores proper alignment when a damaged holder causes noisy or wobbly operation
• Helps maintain safe rail attachment to the cabinet or frame

• Disconnect power (or unplug) and move the appliance to a safe, stable position before starting
• Basic hand tools are typically required; save mounting hardware unless replacement is specified
• If mounting screws or clips are damaged, replace them to ensure a secure fit