Parts for Kenmore 795.75042610 (79575042610, 795 75042610): Refrigerator Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

This is a refrigerator glass shelf that supports food items and helps organize storage space. Replacing a cracked or missing shelf restores safe storage capacity and prevents spills from dripping to lower sections.

• Provides a flat, sturdy surface for refrigerated items
• Helps contain leaks from spills to the shelf area
• Replace if the glass is cracked, shattered, sagging, or missing
• Can also help reduce rattling or uneven placement of items

• Unplug the refrigerator or switch off power before servicing
• Remove food items and lift out the old shelf carefully to avoid injury from broken glass
• Handle the new glass with clean, dry hands; avoid edge impacts
• Ensure the shelf seats fully in the frame/slots before reloading items

This rail holder secures a slide/rail assembly so a shelf or drawer tracks smoothly and stays in place. It restores proper support and alignment for the rail to prevent sagging or detachment. What it does:

• Retains and supports the rail or slide so the drawer/shelf tracks correctly
• Prevents the rail from slipping out or disconnecting during use
• Restores stable operation when a mounting point is cracked or worn
• Common symptom: drawer or shelf falls, slips, feels loose, or rattles

• One rail holder

• Disconnect power and remove contents from the area before starting
• Installation may require basic tools (screwdriver); keep fasteners from the original part
• Handle nearby shelves, glass, and sharp edges carefully to avoid damage or injury

This fresh room tray assembly replaces the crisper drawer tray that holds fruits and vegetables, restoring proper storage and organization in the refrigerator's fresh/produce compartment. Durable plastic construction supports produce and helps keep the fresh room tidy. What it does:

• Provides the flat tray surface for the fresh/produce compartment so drawers slide and store items securely
• Restores proper support if the original tray is cracked, warped, or broken
• Helps prevent items from falling into lower compartments and keeps produce organized
• Replaces worn or damaged trays that interfere with drawer movement or sealing

• Unplug or disconnect power to the refrigerator before servicing for safety
• Remove contents and the crisper drawer before installing the replacement tray
• Slide or snap the tray into the existing tracks/locator tabs; no special tools typically required
• If the tray does not seat smoothly, verify track alignment and avoid forcing parts to prevent damage

This Tray Cover Assembly replaces a damaged or missing ice tray cover to help keep ice contained and protected inside the freezer. It restores the proper fit and helps prevent spills and ice contamination. What it does:

• Covers and protects the ice tray/ice bin to keep ice clean and contained
• Guides ice dispensing and helps maintain proper ice storage alignment
• Commonly replaced when cover is cracked, warped, loose, or missing
• Can reduce accidental spills when removing the ice bin or tray

• One tray cover assembly as shown

• Disconnect power before servicing and work with a dry, empty bin to avoid spills
• Remove the ice bin/tray per your refrigerator's service instructions to access the cover
• Handle clips and tabs gently—plastic parts can be brittle at low temperatures

This vegetable tray assembly is the removable crisper drawer that stores fruits and vegetables to help keep produce organized and contained in the refrigerator. It replaces a cracked, broken, or missing drawer to restore usable storage space. What it does

• Provides a sealed drawer for storing produce and small items
• Restores smooth sliding and proper seating in the refrigerator compartment
• Prevents food from spilling onto lower shelves when closed
• Replaces damaged, cracked, or warped trays that no longer function

• One vegetable tray assembly

• Remove any food and shelves above the drawer before installing
• Slide the new tray into the drawer tracks until it seats; no tools typically required
• Handle with care to avoid chipping or cracking the plastic during installation
• If cleaning is needed, wash with mild soap and warm water; avoid abrasive cleaners

This Vegetable Tray Assembly is the replacement crisper drawer that stores fruits and vegetables while keeping them organized and easy to access. It restores a secure, slide-in storage area in the refrigerator. What it does:

• Replaces a cracked, damaged, or missing vegetable/crisper drawer to restore usable refrigerated storage
• Provides a stable shelf for storing produce and preventing items from falling into lower compartments
• Helps maintain organization and easy access to fresh foods
• Eliminates sticking, jammed, or non-sliding drawers caused by broken tray components

• Remove all food and empty the existing drawer before starting
• Slide the old drawer out and lift to disengage; align and slide the new tray into the same rails until it seats
• Do not force the tray; check for obstructions on the rails or guides before final seating
• If tools are required, use the correct screwdriver and follow manufacturer instructions; disconnect power only if instructed by the appliance manual

This cover assembly replaces a damaged or missing rear housing panel on compatible LG flat-panel TVs, restoring the set's protection and appearance. It provides the outer shell that houses internal components and mounts to the TV chassis. What it does

• Replaces the TV's rear housing to protect internal circuit boards, power supply, and connectors.
• Restores proper mounting points for internal components and external ports.
• Helps prevent dust and debris from entering the TV and interfering with electronics.
• Improves appearance by replacing cracked, warped, or discolored rear panels.

• High-level repair: remove stand and disconnect all power and cables before starting.
• Support the screen and internal components when removing the old cover to avoid stress on the panel.
• Use appropriate non-marring tools and keep track of screws and clips; some fasteners may be reused.

This guide assembly is a molded support/aligning part used inside compatible TVs to secure and guide internal panels and components, helping maintain proper fit and stable operation. What it does:

• Holds and aligns internal panels or trim so screens and bezels sit correctly
• Prevents rubbing, rattling, or misalignment caused by loose or damaged guides
• Restores correct spacing between components after repair or collision
• Helps reduce vibration-related noise when installed properly

• One guide assembly

• Unplug the TV and place on a soft, flat surface before starting disassembly
• Removal typically requires partial cabinet/panel disassembly; keep fasteners organized
• Handle internal components and the guide carefully to avoid cracking plastic or damaging nearby cables

This rail guide assembly supports and guides a refrigerator drawer so it opens and closes smoothly and stays aligned. Replaces a worn or broken guide to restore proper drawer tracking and reduce sticking or binding. What it does:

• Provides a smooth sliding path for the refrigerator drawer to open and close
• Keeps the drawer aligned to prevent tipping or binding under load
• Replaces cracked, worn, or damaged guides that cause rough movement or drawer misalignment
• Works with the matching rail components to maintain proper drawer operation

• Designed for use with compatible refrigerator drawer rails;
• Simple swap-out; remove drawer and mounting screws, replace guide, then reinstall drawer
• Use common hand tools; do not force parts—inspect mating rail for damage
• Disconnect power if required to remove interior panels and follow all safety precautions

This rail guide assembly restores smooth, stable movement for a dishwasher or appliance rack/drawer. It replaces a worn, cracked, or damaged guide so trays slide in and out without sticking or leaning. What it does:

• Guides and supports the appliance rack/drawer during travel for consistent alignment
• Prevents sticking, sagging, and uneven movement caused by broken or worn guides
• Reduces noise from rubbing or misaligned racks as the drawer opens and closes
• Helps maintain proper rack height and positioning for full drawer travel

• Disconnect power and remove contents from the rack/drawer before starting
• Inspect the mounting area and any retaining clips for wear; replace clips if damaged
• Typically secures with clips or screws—use basic hand tools and avoid overtightening
• Test rack movement after installation to ensure smooth operation and correct alignment