Parts for Ge GSS20GEWECC: 03 - Freezer Section Parts

Push-in plug button cap covers unused holes and secures trim panels on refrigerators. Replace if cracked, broken, missing, or worn for a finished look.

Set of 12 size 8-18 mounting screws for dishwashers. Replaces lost, stripped, or missing screws for secure installation of handles and components.

Seals freezer air duct to maintain proper temperature and airflow. Replace if frost builds up or cold air leaks. Verify fit with your model number.

Refrigerator freezer duct gasket seals the air passage between compartments. Replace if torn or loose to restore proper cooling and prevent frost buildup.

Freezer air duct for side-by-side refrigerators. Directs cold air from freezer to fresh food compartment. Replace if cracked, broken, or missing.

Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.

Mounting screw secures door handles to refrigerator doors. Replace if missing, stripped, or broken. Requires allen wrench for installation. Essential hardware.

This shelf support secures an interior refrigerator shelf in place so food items stay level and storage remains organized. It replaces a cracked or worn support to restore proper shelf seating and stability. What it does

• Holds a refrigerator shelf or shelf trim in the correct position to prevent sagging or tipping
• Restores stable support for glass or wire shelving that no longer stays seated
• Helps eliminate shelf movement that can cause items to slide or spill
• Works where a broken, chipped, or missing support prevents proper shelf alignment

• Disconnect power to the appliance before starting any repair and empty the shelf area
• Remove the affected shelf or trim to access the support; reinstall shelf to confirm correct seating
• Use basic hand tools as needed and avoid forcing parts to prevent further damage
• Replace all affected pieces for consistent shelf alignment

Refrigerator not cooling but freezer works? Frost buildup on back wall? Your evaporator may need replacement. Moderate difficulty repair for most models.

Freezer icing up or frost buildup? This defrost heater melts accumulated ice on evaporator coils. Moderately difficult repair requires panel removal.

Freezer coils icing up and fridge too warm? This defrost thermostat monitors evaporator temperature to prevent overheating. Easy 20-minute DIY fix.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Evaporator fan motor housing for refrigerators. Mounts in the freezer section to enclose the evaporator fan motor. Replace if cracked or broken.

Lower cam riser for refrigerator door hinge. Lifts door for smooth opening and closing. Replace if cracked, worn, or missing to restore proper fit.

Wiring harness that connects the freezer evaporator fan and heater circuit. Replace if your harness is damaged, burned, or has loose connections.

The Front Roller Assembly is an OEM part for GE refrigerators. It's designed to support the front part of the refrigerator, allowing for smooth and easy movement when you need to shift the appliance for cleaning, maintenance, or repositioning. This roller assembly ensures the weight of the refrigerator is evenly distributed, reducing strain on the floor and making it easier to move the refrigerator without damaging the flooring or the appliance itself.

Causes of a bad Front Roller Assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or corrosion over time. 

Symptoms of a bad Front Roller Assembly include:

• Difficulty moving the refrigerator
• Uneven positioning or tilting of the refrigerator
• Excessive noise or resistance when attempting to move the appliance
• Visible wear or damage to the rollers

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Protective cover for the freezer thermistor sensor in side-by-side refrigerators. Replace if cracked, broken, or missing to shield the sensor.

This grille base assembly replaces a damaged or missing kick panel at the refrigerator's lower front to restore appearance and protect components. It provides a finished look and helps keep the condenser area covered. What it does:

• Replaces cracked, warped or broken lower front grille to restore cabinet appearance
• Covers and protects the condenser and components at the refrigerator base
• Helps maintain proper airflow path along the cabinet front by keeping the grille in place
• Prevents debris from entering the lower service area

What's included:

• One grille base assembly

Install notes:

• Designed for front/lower mounting; verify correct orientation before fastening
• Use basic hand tools; avoid overtightening fasteners to prevent cracking
• Disconnect power to the appliance before removing service panels if required for access

Secures the lower front grille or trim panel to prevent rattles and gaps. Replace when clips break or go missing for a snug, aligned fit. Verify compatibility.

Support rod that reinforces the refrigerator door handle assembly. Replace this rod if your handle feels loose, wobbles, or the support bar is cracked or broken.

Illuminates your refrigerator interior. Replace when burned out or flickering. Appliance-rated for durability. Verify wattage and base type match.

Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.

Bisque plastic trim cover that snaps over the refrigerator door hinge. Replace if cracked, broken, or missing to restore a clean appearance.

Hex head mounting screw for refrigerator door hinges. Replace lost, stripped, or missing hardware when installing or reattaching refrigerator doors.

12-24 CA HX 7/8 S

Secures the hinge cover to your refrigerator door or cabinet hinge. Replace this screw if it's missing, stripped, or damaged to stop the cover from loosening.

Protective cap that covers the evaporator fan motor bearing and housing in freezers and refrigerators. Replace if cracked, broken, or missing to prevent debris.

Fixes freezer or fridge light staying on, or ice dispenser not working when door closes. Simple 5-minute DIY fix with putty knife—video included.

If your refrigerator compartment isn't cooling while the freezer stays cold, the evaporator fan motor likely failed. DIY-friendly repair with video guide.

Secures the evaporator fan motor to the refrigerator cabinet. Replace if your original bracket is bent, broken, or cracked to restore proper mounting.

Secures the evaporator fan motor to the freezer evaporator assembly. Replace if cracked, broken, or causing motor vibration and noise issues.

Rattling noise or warm temps? A broken evaporator fan blade disrupts air circulation. This repair takes 30-45 minutes with basic tools and our video guide.

Cushions where the washer lid meets the top panel to soften closure and protect the finish. Replace worn, cracked, or missing bumpers to reduce noise.

Rubber grommet that mounts and cushions the evaporator or condenser fan motor. Replace if cracked, worn, or missing to prevent vibration and noise.

Secures and seals water line connections in your refrigerator's dispensing system. Replace if leaking or loose to prevent water damage. Confirm fit.

Secures water tube to cabinet, preventing kinks and flow issues. Replace if tube is loose, vibrating, or causing noise. Confirm fit with your model number.