Parts for Ge CXE22DP3PED1: Freezer Section Parts

This evaporator cover assembly protects the freezer evaporator and includes the temperature-sensing thermistor to help the control monitor and regulate freezer temperatures. Restores proper airflow and sensing when the original cover or thermistor fails. What it does:

• Shields the evaporator coils from damage and helps direct airflow through the freezer compartment.
• Houses the thermistor that provides temperature feedback to the control for accurate cooling cycles.
• Can reduce abnormal frost buildup or long-run cooling if a damaged cover or faulty thermistor was causing incorrect sensor readings.
• Commonly replaced when you see excessive ice on the evaporator, inconsistent freezer temperatures, or control error codes linked to temperature sensing.

• One evaporator cover assembly with attached thermistor.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle the thermistor and connector carefully; avoid bending or pinching sensor leads.
• Verify proper routing and secure attachment so the cover directs airflow as intended.
• Inspect surrounding seals and fasteners and replace any damaged hardware for a complete repair.

The Defrost Thermistor is an OEM replacement part for GE refrigerators. It monitors temperature to control defrost cycles and prevent frost buildup. Common causes of failure in this thermistor include wear and tear over time, electrical issues, or damage from moisture exposure.

Symptoms of a failing defrost thermistor include:

• Irregular cooling in the refrigerator or freezer compartments
• Excessive ice buildup in the freezer
• Inconsistent or improper defrosting cycles

Replacing the thermistor restores proper temperature and defrost function. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This DC fan and gasket assembly replaces a refrigerator evaporator fan motor and seal to restore airflow across the evaporator for proper cooling performance. It's a direct-fit assembly designed to mount in the evaporator compartment. What it does

• Circulates cold air across the evaporator coil to support consistent cooling
• Gasket seals the fan opening to reduce air bypass and improve airflow efficiency
• Commonly used when fan noise, weak airflow, or uneven cooling are present
• Helps stop intermittent fan operation caused by motor or mounting seal failure

• One DC fan and gasket assembly

• Disconnect power to the appliance before starting any work
• Handle the fan blades and connector carefully to avoid damage to the motor or wiring
• Expect basic disassembly of the evaporator cover; keep fasteners organized for reassembly

This evaporator fan bracket secures the refrigerator's evaporator fan motor and blade assembly to the evaporator housing, keeping the fan properly positioned for reliable airflow and consistent cooling throughout the freezer and fresh-food compartments. What it does:

• Holds the evaporator fan motor and blade in the correct position to maintain steady airflow across the evaporator coil.
• Helps prevent fan wobble or contact with other components that can cause noise or premature wear.
• Supports proper defrost airflow to reduce frost buildup and improve temperature consistency.
• Can resolve symptoms such as a noisy or misaligned evaporator fan, reduced airflow, or uneven cooling when the bracket is damaged or broken.

• One evaporator fan bracket (mount)

• Disconnect power to the appliance before beginning any repair.
• Remove interior panels and the evaporator cover to access the fan assembly; handle the evaporator coil carefully to avoid damage.
• Verify fan motor and blade alignment on the bracket before reassembling; replace any damaged fasteners.

The Freezer Defrost Heater is an OEM part for GE refrigerators. Located within the freezer compartment walls, it facilitates automatic defrost cycles through targeted heat application. Reliable frozen storage depends on an effective defrost heater.  

Causes of failure involve cracking or erosion of heating filaments from repetitive freeze-thaw cycles, loose wire connections preventing electric current flow, or mineral buildup hindering thermal transfer over many years of use.

Symptoms include:

• Ice or frost accumulation inside the freezer requires manual removal
• Foods freezing solidly to shelves and walls  
• Extended defrost time or ineffective melt during automatic cycles

Replacing with this genuine GE heater ensures optimized defrosting for food preservation. Compatible replacements include models for Hotpoint, RCA and select Kenmore branded units seeking to restore automatic function.

The Ice Box Fan is an OEM component for GE refrigerators. Located within the freezer compartment, this fan circulates cold air for proper icemaking and preservation of items stored below. It works in conjunction with the evaporator coils and air ducts to regulate temperatures throughout the fridge. 

Causes of a faulty ice box fan may include a failed motor, worn bushings obstructing smooth operation, or damage to fan blades inhibiting airflow. Mineral deposits can also impact performance over time.

Symptoms of a malfunctioning fan consist of:

• Inconsistent or insufficient icemaking abilities  
• Warm or thawed freezer items despite closed-door
• Strange noises or vibrations upon fan activation
• Visible frost patterns indicating poor air circulation

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. Optimized cooling ensures safe, long-lasting food storage.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.