Parts for Ge GNS22EGEBFBB: Freezer Section Parts

Mounting screw secures door handles to refrigerator doors. Replace if missing, stripped, or broken. Requires allen wrench for installation. Essential hardware.

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

This self-adhesive foam seal strip replaces worn or missing foam seals to help reduce air leaks and dampen vibration around appliance openings. It restores a tighter fit for doors and panels, improving temperature control and efficiency. What it does:

• Fills gaps and seals edges to help prevent air leakage and improve temperature stability
• Cushions door or panel contact to reduce rattling and wear
• Helps keep out dust, moisture, and drafts in affected areas
• Adhesive backing secures the foam strip for a straightforward repair

• Clean and dry the mounting surface thoroughly before applying to ensure good adhesion
• Measure and trim the strip to fit; press firmly along the length to secure the adhesive
• For best results, apply at room temperature and allow adhesive to set before use

Self-adhesive foam strip seals gaps along doors and panels to reduce air leaks and vibration. Replace when worn or compressed to restore efficiency.

Rubber grommet that mounts and cushions the evaporator or condenser fan motor. Replace if cracked, worn, or missing to prevent vibration and noise.

Secures water tubing to fittings in refrigerators and dishwashers. Replace if leaking, tubing slips off, or clamp is cracked. Confirm fit with model number.

Protective insulation sleeve for refrigerator wiring harnesses. Installs around electrical wiring to prevent heat damage and wear. Replace if cracked or torn.

Mounting screw for refrigerator and freezer internal components. Replace if stripped, missing, or damaged during repairs. Secures panels and parts.

Fix inconsistent temps or ice buildup on evaporator coils? This sensor seal protects accuracy. DIY-friendly with wire splicing. Video guide available.

Protective grille cover that mounts over the temperature sensor in your refrigerator. Replace if cracked, broken, or missing to properly shield the sensor.

Fixes freezer or fridge light staying on, or ice dispenser not working when door closes. Simple 5-minute DIY fix with putty knife—video included.

Illuminates your refrigerator interior. Replace when burned out or flickering. Appliance-rated for durability. Verify wattage and base type match.

Fix a refrigerator that's not cooling properly with this evaporator coil assembly. Restores cooling efficiency when frost buildup or warm temps occur.

Refrigerator light not working or flickering? A faulty light socket often causes this. Simple plug-in repair with no tools required. Video guide available.

Hex head screw for securing interior panels, control covers, and components inside your refrigerator. Replace missing, stripped, or damaged screws.

Rattling noise or warm temps? A broken evaporator fan blade disrupts air circulation. This repair takes 30-45 minutes with basic tools and our video guide.

Wire tie retainer for refrigerators. Secures and organizes internal wiring. Replace if cracked, broken, or missing to keep wires properly bundled.

Rubber grommet that mounts and cushions the evaporator or condenser fan motor. Replace if cracked, worn, or missing to prevent vibration and noise.

Secures the evaporator fan assembly to the freezer compartment wall. Replace this mounting bracket if cracked, broken, or missing hardware slots.

Secures the evaporator fan assembly behind the rear freezer panel. Replace if cracked, rusted, or missing to restore proper fan mounting and clearance.

Mounting screw for freezer interior components and panels. Replace if stripped, corroded, or missing to secure shelves, racks, or trim properly.

Fixes freezer icing and loud humming after 3 weeks. Maintains proper cooling temperatures. Terminal connectors for easy installation without splicing.

Ice maker not filling or water spilling? This fill cup directs water into the ice maker mold for proper ice production. Simple clip-on install.

Freezer coils icing up and fridge too warm? This defrost thermostat monitors evaporator temperature to prevent overheating. Easy 20-minute DIY fix.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Fridge warm but freezer cold? Your evaporator fan motor likely failed. Fixes air circulation issues. Moderate DIY repair with basic tools.

Rubber bumper that cushions and mounts the evaporator fan motor assembly. Replace if cracked, deteriorated, or missing to reduce vibration and noise.

Secures and seals water line connections in your refrigerator's dispensing system. Replace if leaking or loose to prevent water damage. Confirm fit.

Ice maker not producing ice or stopped working? This ice maker kit restores ice production. Includes full assembly for harvesting and ejecting ice.

A small replacement plug that seals the evaporator cover opening to help prevent airflow leaks and contain moisture inside the freezer compartment. Simple, inexpensive fix for cover damage or missing plugs. What it does:

• Seals an opening in the evaporator cover to maintain proper airflow paths
• Helps reduce moisture and ice buildup around the evaporator area
• Keeps debris and contaminants out of the evaporator housing
• Restores a secure fit where the original plug was lost or broken

• One evaporator cover plug

• Disconnect power to the appliance before starting any work
• Remove the evaporator cover fasteners to access the plug location; install by pressing the plug into the opening until it seats
• Handle the evaporator and tubing carefully to avoid damage; avoid sharp tools near the coil