Parts for Ge ZIC360NXBLH: 03 - Freezer Section, Trim & Components Parts

This is a large adhesive logo nameplate that attaches to the front of a range or cooktop. It provides brand identification and a finished look to the appliance exterior. Replace this nameplate if it has fallen off, become discolored, or is peeling away from the surface.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Interior light not working when door opens? This light switch controls refrigerator illumination. DIY-friendly install takes 30-45 minutes with video.

Plastic tubing that routes water through your refrigerator's system. Replace if cracked, brittle, kinked, or leaking to restore proper flow and prevent damage.

A left-hand top door closure assembly that secures and cushions the refrigerator door at the upper hinge for smoother closing, improved alignment, and a tighter seal. Restores proper door movement and reduces rattling or sag. What it does

• Guides and cushions the top of the door at the hinge so the door closes smoothly and stays aligned.
• Helps maintain an effective seal to reduce air leaks and temperature fluctuations.
• Reduces door wobble, sagging, or rattling caused by worn or broken closure components.
• Works with the top hinge area; symptom linkage is safe and commonly accepted (door failing to close fully, door misalignment, or excessive movement).

• Disconnect power to the appliance and remove food/items from the door area before starting.
• Support the door while removing or installing hinge/closure hardware to prevent dropping or damage.
• Uses basic hand tools; follow OEM service instructions or model-specific diagrams for correct hinge orientation and torque.

Fixes uneven cooling in fresh food section. This air diffuser directs chilled air for consistent temperatures. Simple DIY repair restores airflow.

Ice maker water fill tube kit for refrigerators. Replaces cracked, damaged, or leaking tubing that routes water from inlet to ice maker. Includes mounting hardware.

Replace your damaged or missing refrigerator toe kick grille. This front base panel covers the bottom opening beneath the door. Ideal for cracked or worn grilles.

Left hand base channel provides lower cabinet support for your freezer. Replace if cracked, bent, or damaged to restore proper alignment and stability.

Size: 10-32 GXTT FLP.595 S

Spring should have GOLD color.

Bottom hinge bushing guides the refrigerator door hinge pin for smooth pivoting. Replace if worn, cracked, or missing to restore proper alignment.

Ice maker not filling or water spilling? This fill cup directs water into the ice maker mold for proper ice production. Simple clip-on install.

This corner key assembly secures and finishes a refrigerator door corner, restoring proper alignment and a clean appearance. It replaces a cracked, broken, or missing corner piece to help the door close evenly and look factory-original. What it does:

• Provides structural support at the door corner to maintain proper edge alignment
• Covers and protects the underlying corner area from damage and wear
• Helps reduce visible gaps or misalignment that can affect sealing
• Restores the cabinet's finished appearance after impact or deterioration

• One corner key assembly

• Disconnect power to the appliance before starting any repair
• Remove door or trim per manufacturer instructions to access the corner area
• Install with original fasteners or clips; do not force or over-torque plastic snaps
• If hinge or door alignment issues persist, inspect associated hinges and gaskets

Removable plastic bin that collects and stores ice from your ice maker. Replace if cracked, broken, or missing to restore proper ice storage.

Large freezer basket for bottom-mount refrigerators. Replaces cracked, broken, or missing storage baskets in the freezer compartment. Direct fit.

Freezer drawer slide rail for bottom-mount refrigerators. Replace if drawer is difficult to open, rail is cracked, or drawer jams when sliding out.

Slide support assembly that stabilizes and guides your refrigerator freezer drawer. Replace when the original is cracked, broken, or worn to restore alignment.

Truss head screw for refrigerator assembly and panel mounting. Replace missing, stripped, or damaged screws during repairs or part installations.

Phillips pan head tapping screw for refrigerators and freezers. Secures panels, brackets, and internal components. Replace missing or stripped screws.

Size: 10-32 GXTT FLP.595 S

Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.

Small freezer basket for bottom-mount refrigerators. Organizes frozen items in the freezer drawer. Replace if cracked, broken, or missing. Easy install.

Mounts to the freezer wall to hold the upper basket in place. Replace if broken, missing, or cracked to restore proper alignment and smooth sliding.

Plastic guide that supports and aligns the upper freezer shelf along its track. Replace if cracked, broken, or worn to restore smooth sliding motion.

Upper freezer basket slide rail for bottom-mount refrigerators. Guides the top basket for smooth gliding. Replace if cracked, warped, or broken.

Upper case hinge for refrigerator doors. Secures and allows smooth door pivoting. Replace if cracked, broken, or worn to restore proper door alignment.

Freezer drawer slide shim for bottom-mount refrigerators. Replaces worn, cracked, or missing shims that support smooth drawer operation.

Right side case trim for refrigerators. Covers the side panel edge for a finished look. Replace if cracked, broken, or missing for proper appearance.

This is a right-side hinge assembly that attaches the front base grille to the refrigerator cabinet. It allows the grille to pivot open for access to the condenser coils and other components beneath the unit. Replace this hinge if the grille is sagging, won't stay closed, or the hinge tabs are broken or cracked.

Left-side grill hinge secures your refrigerator's lower access panel. Replace when bent, worn, broken, or missing to restore stable alignment and operation.

Left-hand link actuator for refrigerator linkage systems. Replaces worn, broken, or damaged actuators that cause erratic movement in mechanical linkages.

White 12-24 screw secures panels, trim, and brackets inside your refrigerator. Replace missing, stripped, or damaged fasteners to restore stability.

This is a small metal shear pin used in the refrigerator's ice maker or door hinge assembly. It acts as a mechanical safety component designed to break under excessive force, protecting more expensive parts from damage. Replace this pin if it has snapped or sheared off, causing the connected component to become loose, misaligned, or non-functional.

This track shelf is the replacement door shelf track that secures a refrigerator door shelf in place, restoring stable storage and preventing the shelf from shifting or falling during normal use. What it does:

• Provides the mounting channel that a door shelf or retainer sits in to hold items on the refrigerator door
• Replaces a cracked, worn, or broken track that lets a door shelf tilt or slide out
• Restores proper shelf alignment so door bins sit securely and items stay in place
• Compatible with typical snap-in or screw-mounted door shelf assemblies

• Remove all items from the door shelf and, if needed, remove the shelf before replacing the track
• Power off or unplug the appliance only if access requires it; otherwise take care to avoid sharp edges
• Align the track with the door mounting locations and press or secure into place until fully seated
• If hardware is present, retain and reuse existing screws/clips; replace only with manufacturer-specified fasteners

A single replacement screw used to secure appliance panels, trim, and internal brackets so components stay aligned and reduce rattling. Simple, direct-fit fastener for restoring proper mounting and stable operation. What it does:

• Secures panels, mounting brackets, trim pieces and other appliance components
• Helps stop rattling, vibration, or loose panels caused by missing or stripped fasteners
• Restores proper alignment of doors and access panels when original screw is lost or damaged
• Matches the OEM fastening point for a straightforward hardware replacement

• Disconnect power to the appliance before working on electrical components or access panels
• Use the correct screwdriver to avoid stripping the head; match drive type to the screw
• Tighten firmly but do not overtighten—stop when snug to avoid damaging threads or parts
• Keep removed fasteners organized and compare with the replacement to ensure correct fit