Parts for Ge PSS25NCNABB: 06 - Freezer Shelves Parts

Size: 10-32 GXTT FLP.595 S

This silicon controlled rectifier (SCR) is a replacement control semiconductor that helps regulate power to heating elements and motors, restoring proper cycle control and heat delivery in compatible appliances. What it does:

• Controls and chops AC power to heating elements or motor circuits for variable heat/speed control
• Can stop intermittent or no-heat conditions caused by a failed SCR in oven, range, or similar appliances
• Helps restore stable thermostat/regulation behavior when the original SCR is not switching correctly
• Commonly used where precise power control is required in the appliance's control board or module

• One silicon controlled rectifier (SCR) as shown

• High-level, service-only replacement — disconnect power before starting work
• Verify correct part number on the appliance and transfer heat sinks or mounting hardware if required
• Use proper ESD precautions when handling semiconductor components

This replacement painted #8-18 screw secures panels and components on select appliances, restoring proper fit and reducing vibration. Use it when original fasteners are missing, stripped, or corroded to help keep parts aligned and stable. What it does:

• Fastens trim, panels, brackets, and small components in appliance assemblies
• Replaces stripped, rusted, or missing #8-18 fasteners that cause loose parts
• Helps eliminate rattles and misalignment from loose or damaged screws
• Matches the painted finish for a cleaner, OEM-like appearance

• Use the correct driver bit and avoid over-torquing to prevent stripping
• Inspect mating threads and replace if damaged before installing
• Disconnect power to the appliance if working near electrical components; follow all safety precautions

The Handle is an OEM replacement part for GE Refrigerators. It allows for convenient access and opening of the refrigerator or freezer door. The handle is designed to withstand frequent use and open and close smoothly without issue. 

Symptoms of a bad Handle include:

• The handle is loose or wobbly
• Difficulty in opening the refrigerator door
• The handle detaching from the door
• Visible cracks, breaks, or wear on the handle

Causes of a bad Handle can be regular wear and tear over several years of use, Handle damage from being pulled too forcefully, or impact damage from moving or transporting the Refrigerator improperly. 

This Genuine OEM GE replacement Handle is also compatible with some Hotpoint, RCA and select Kenmore refrigerators.

This freezer shelf trim replaces a damaged or missing edge piece on the freezer shelf. It attaches to the shelf/frame to provide a finished lip that helps contain items and restores the shelf's original fit and appearance.

• Provides the finished edge on a freezer shelf to help keep items from sliding off
• Attaches to the shelf/frame for a secure, correct fit
• Replace when cracked, warped, loose, or missing
• Common symptoms include a broken or jagged shelf edge, trim that won't stay attached, or items slipping off the shelf

• Unplug the refrigerator and remove items from the affected shelf
• Remove the shelf if needed; release and remove the old trim
• Align the new trim with the shelf/frame and press until fully seated and secure
• Do not force parts together; inspect the shelf/frame for damage before reassembly

This slide-out freezer shelf restores a smooth, stable storage surface and easy access in the freezer compartment. Replace a cracked, hard-to-slide, or missing shelf to regain capacity, organization, and the spacing your freezer was designed for.

• Provides a level storage surface and slides forward for better visibility and reach
• Secures into the side supports/rails at the designated freezer position
• Helps maintain intended spacing and airflow between freezer sections
• Typical symptoms: cracked or broken shelf, damaged tabs, won't slide smoothly, sits unevenly, or missing shelf

• Remove items from the area and support the shelf with both hands when removing/placing
• Align with the side supports/rails and slide fully into place; verify correct front/back orientation
• Do not force; ensure it is seated in the correct slots before loading
• Handle edges carefully; wear cut-resistant gloves to prevent injury

The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer.

Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing.

Symptoms of a bad handle include:

• Loose, sagging, or unstable grip that does not feel secure
• Broken, cracked, or disconnected parts
• Chipped or faded surfaces affecting the appearance
• Difficulty or inability to open the drawer

This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer.

Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing.

Symptoms of a bad handle include:

• Loose, sagging, or unstable grip that does not feel secure
• Broken, cracked, or disconnected parts
• Chipped or faded surfaces affecting the appearance
• Difficulty or inability to open the drawer

This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This short freezer basket wire provides a sturdy support frame for the freezer compartment, helping organize frozen food and improving access. It replaces a damaged or missing basket wire to restore proper storage functionality. What it does:

• Supports and contains frozen items on a freezer shelf or drawer
• Restores proper fit and alignment for a short/freezer basket assembly
• Helps prevent items from shifting or falling through shelf openings
• Used when wire is bent, broken, or missing and basket stability is compromised

• One short freezer basket wire

• Remove food and unplug or power off the appliance before starting work
• Typically secures to existing shelf or drawer mounts—inspect mounts for damage before reinstalling
• Handle wire edges carefully to avoid cuts; wear gloves if needed

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly. It replaces worn or broken slides to restore proper basket movement and prevent sagging or jamming. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Supports basket weight to prevent tilting or sagging
• Replaces worn, cracked, or damaged slides that cause sticking or misalignment
• Helps reduce noise from a loose or unstable basket

• Disconnect power to the appliance before beginning repair
• You may need to remove the basket to access the slide; keep fasteners for reassembly
• Install by aligning the slide in its track and securing any clips or screws as required

This left-side basket support slide holds and guides a refrigerator's slide-out basket, restoring smooth movement and proper alignment so the basket opens and closes without sagging or binding. What it does:

• Supports the left side of a slide-out refrigerator basket or drawer
• Guides the basket along its track for smooth, controlled sliding
• Prevents sagging, misalignment, or catching when opening or closing the basket
• Helps maintain even spacing and stable basket seating during use

• One left-side support slide

• Disconnect power and remove food/ice from the area before starting
• Typical installation involves removing the drawer, aligning the slide, and securing it in the existing mounts or clips
• Use basic hand tools; do not force parts into position—verify proper seating and smooth operation before reassembly