Parts for Ge ZISP480DKCSS: Fresh Food Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This top hinge bushing helps the refrigerator door pivot smoothly and reduces metal-on-metal wear. Replacing a worn bushing restores quieter operation and helps the door align and close properly. What it does:

• Provides a low-friction mounting surface for the top hinge pin
• Reduces hinge noise, squeaks, and grinding when opening or closing the door
• Helps maintain proper door alignment and sealing by preventing excess play
• Prevents accelerated wear of the hinge pin and surrounding trim

• Always disconnect power to the appliance before starting any repair
• Support the door securely before removing the hinge to avoid injury or damage
• Inspect hinge pin and surrounding components; replace if heavily worn
• Hand-tighten fasteners, then torque to manufacturer specifications; avoid over-tightening plastic components

This is the gallon-size door bin for the fresh food compartment. It restores secure storage for large containers on the refrigerator door when the original bin is cracked, loose, or missing.

• Holds gallon jugs and tall bottles on the fresh food door
• Helps keep items organized and reduces tipping/spills
• Replaces a broken, warped, or missing door bin
• Corrects issues like the bin not seating, falling off, or reduced door storage

• Compare to your original and install in the same door position; many models use multiple bin widths
• Align rear hooks with the door liner slots and press down until fully seated
• Handle carefully to avoid stress cracks; do not overload after installation
• If the bin is very cold, allow it to warm to room temperature before snapping into place

Restore door storage with this door bin assembly. It replaces a cracked, warped, or missing bin so bottles, condiments, and small items stay organized, easy to grab, and less likely to tip or fall.

• Mounts on the inner door to hold jars, bottles, and condiments
• Restores proper fit when original bin tabs or edges are broken
• Helps keep items upright and reduces spills or rattling
• Common signs it's needed: cracked bin, broken front edge, bin falls off, lost door storage

• Empty the old bin; lift up and pull out of the door channels
• Align the new bin's tabs with the same door slots and press down until it seats securely
• Some bins are position-specific; match the size/shape to the original location
• Disconnect power if working near lighting or controls; handle plastic edges carefully

This replacement door gasket seals the perimeter of a side-by-side refrigerator door to keep cold air in and humidity out. Replacing a worn gasket restores a proper seal to help maintain stable temperatures and reduce frost and condensation.

• Creates an airtight seal between the door and cabinet to maintain set temperatures
• Helps prevent frost/ice buildup and sweating around the door opening
• Can resolve doors that won't fully seal or show visible gaps
• Replaces gaskets that are torn, cracked, shrunken, or warped

• Unplug the refrigerator; let the new gasket warm to room temperature. Soak in warm water if needed to relax folds.
• Remove the old gasket. Starting at the corners, press the new gasket fully into the door channel all the way around.
• Use low heat (hair dryer) sparingly to smooth waves and improve the seal—do not overheat.
• Adjust door alignment if necessary.

This stainless steel hex cap screw fastens appliance panels and components where a 1/4-20 threaded fastener is required. Durable corrosion-resistant finish helps maintain secure mounting and reliable operation. What it does

• Secures panels, brackets, and internal components to frame or chassis.
• Replaces stripped, rusted, or missing mounting screws that cause loose or rattling parts.
• Restores proper alignment and prevents movement that can lead to wear or noise.

• Use the correct 1/4 in hex socket or wrench; avoid rounded or worn tools.
• Tighten until snug; do not over-torque — overtightening can strip threads or crack plastic parts.
• Replace any damaged mating hardware (nuts, clips, or threaded inserts) for a secure fit.
• Power tools may be used carefully on low torque settings to avoid over-driving.