Parts for Ge ZISP480DKCSS: Fresh Food Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This replacement fresh-food shelf restores usable storage and keeps items organized in the refrigerator. Fits into the cabinet to support food containers and bottles for everyday refrigeration. What it does:

• Provides a stable, level surface for storing food and beverages in the fresh-food section
• Replaces cracked, chipped, or missing shelving that causes instability or spills
• Helps restore proper organization and usable storage space inside the refrigerator
• Compatible with models that use the WR32X26801 shelf design

• Slide into the designated shelf supports until fully seated; avoid forcing the shelf past obstructions
• Handle glass shelves with care; use gloves and eye protection if the shelf is cracked
• Disconnect power and remove food from the area if access requires significant repositioning
• If shelf clips or trim are damaged, replace them separately—only the shelf is included

This snack pan assembly is a replacement storage pan designed to hold snacks and small items in the appliance's refrigerated compartment, restoring organized storage and preventing spills from a cracked or damaged pan. What it does

• Provides a dedicated, removable tray for storing snacks and small foods
• Slides into the refrigerator compartment tracks for easy access and removal
• Replaces cracked, warped, or worn snack pans that cause spills or poor fit
• Restores proper storage function and helps keep interior shelves tidy

• Always unplug the appliance or shut off power before installing parts
• Remove food from the compartment and clear surrounding shelves for access
• Handle edges carefully; align the pan with the tracks and slide into place until secured
• Verify smooth operation and proper seating before returning contents to the compartment

This snack pan wire support holds the snack/deli pan or small shelf securely in the refrigerator, restoring stable storage and proper alignment so pans slide and sit without sagging or falling. What it does:

• Supports the snack/deli pan or small wire shelf to prevent sagging and uneven seating
• Keeps pans aligned so they slide smoothly and don't tip or fall
• Stops rattling or shifting caused by a bent or broken support
• Helps maintain organized storage in the compartment where the snack pan sits

• Unplug the appliance or disconnect power before servicing
• Remove the snack pan and any items from the compartment for safe access
• Inspect mounting tabs and slide rails; align and snap or slide the support into place per the original fit
• Handle sharp sheet-metal edges with care and use appropriate tools; replace if mounting tabs are damaged

This front pan seal replaces the worn gasket that seals the refrigerator's front drip/pantry pan, helping keep water contained and directing drainage properly to prevent puddling and odors. Fits the pan edge at the fridge base. What it does

• Creates a tight edge seal along the front of the refrigerator drain/drip pan to keep condensation and defrost water contained.
• Helps direct water toward the drain channel so it can evaporate or flow to the condenser pan.
• Reduces chance of water pooling on the floor near the refrigerator base.
• Can improve odor control by preventing trapped moisture under the pan.

• One front pan seal.

• High-level swap: remove lower kickplate (if present), peel out the old seal and press the new seal into the pan groove; follow OEM instructions for your model.
• Use gentle, even pressure to seat the seal fully into the pan channel; avoid stretching the seal excessively.
• If adhesive is used by the model, only apply OEM-recommended adhesive in small amounts.
• Disconnect power or follow safety steps before working near electrical components.

This inner drawer slide guides and supports a refrigerator drawer/bin so it opens and closes smoothly. Replacing a worn or cracked slide restores proper alignment and easy, consistent movement of the drawer.

• Provides guided travel for the drawer along the cabinet rails
• Helps keep the drawer level and properly aligned to prevent binding
• Replace if the drawer sticks, grinds, jumps track, or won't close fully
• Visible cracks, broken tabs, or excessive wobble indicate a failed slide

• Unplug the refrigerator before servicing; remove the drawer and its contents
• Note the orientation of the old slide and reuse the existing mounting hardware
• Install the new slide in the same position; tighten screws evenly without overtightening
• Test drawer movement and ensure it seats flush and glides smoothly end to end

This right-hand pan side support secures the refrigerator drain/drip pan, helping keep the pan aligned and stable to prevent sagging or movement that can lead to noise or water pooling under the appliance. What it does:

• Holds the drain/drip pan in the correct position at the right side of the cabinet
• Prevents pan sagging that can cause vibration or rubbing noises
• Helps maintain proper pan alignment to reduce the chance of water spills or pooling
• Replaces worn, cracked or broken side supports that no longer secure the pan

• Disconnect power to the appliance before beginning any repair
• Access may require removing the kickplate/grille and/or sliding out the pan
• Handle plastic parts carefully to avoid cracking; confirm correct side (right-hand) before installation
• If fasteners are stripped or damaged, replace them with OEM-recommended hardware

This left-side pan support secures and aligns the refrigerator pan/drawer, restoring stable, level support for smooth drawer movement and proper pan positioning. It's a simple replacement that prevents sagging or misalignment. What it does:

• Supports the refrigerator pan or deli drawer on the left side to keep it level and stable
• Holds the pan in place so drawers slide smoothly and don't catch or tilt
• Failsafe for preventing pan sagging or partial drops when the original clip breaks
• Helps maintain proper airflow and drawer operation by keeping components aligned

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the pan/drawer per your model's diagram to access the support
• Replacement typically snaps or screws into the same bracket location — align tabs and press firmly until seated
• Inspect adjacent supports and mounting clips; replace any damaged pieces to ensure proper fit

This outer drawer slide supports and guides a refrigerator drawer or pantry pan so it opens and closes smoothly. Replacing a worn or cracked slide restores alignment and helps prevent sticking, tipping, or spills.

• Attaches as the outer rail for the sliding drawer assembly
• Provides smooth gliding action and supports the drawer/pan
• Helps keep the drawer level and properly aligned
• Common symptoms: drawer hard to move, tilts or falls, cracked/broken rail, scraping or binding

• Disconnect power; empty and remove the affected drawer
• Remove the shelf/cover if needed to access the slide
• Take out mounting screws/clips; note the slide's orientation
• Install the new slide, ensure rails are parallel, and test drawer travel

A 6 x 1/2 inch pan-head Phillips screw used to fasten panels, trim, brackets and small assemblies on appliances. Replacing worn or missing screws restores secure mounting and reduces vibration or rattling. What it does:

• Fastens panels, brackets and trim where a 6 x 1/2 in. pan-head Phillips screw is required.
• Stops loose or rattling parts caused by missing, stripped or corroded screws.
• Provides the correct head profile for a Phillips driver to allow proper torque and seating.
• Used in non-structural fastening points on appliances.

• Always disconnect power and unplug the appliance before beginning repairs.
• Use the correct-size Phillips screwdriver to avoid cam-out and head damage.
• Do not over-tighten; over-torquing can strip threads or deform mating parts.
• Inspect mating threads and replace damaged components before installation.