Parts for Ge MSG28DHCBWW: 06 - Fresh Food Shelves Parts

This upper vegetable pan provides a replacement crisp-drawer liner that restores storage for fruits and vegetables and helps contain spills in the refrigerator. Fits the designated upper crisper location for correct fit and function. What it does:

• Holds produce and small items in the upper crisper area to prevent direct contact with the refrigerator floor
• Contains minor spills and helps keep drawer contents organized
• Replaces cracked, warped, or damaged upper veg pan that no longer supports produce properly
• Restores proper clearance and fit when the original pan is broken or missing

• One upper vegetable (veg) pan

• Remove food and drawers before replacing; handle plastic parts gently to avoid cracking
• Slide the new pan into the same track/orientation as the original until it seats securely
• No tools typically required; if the drawer assembly must be removed, power down and follow the refrigerator manufacturer's service instructions

Left side.

This replacement part is a snack pan slide rail, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This part is able to hold up other trays and racks in the refrigerator and freezer so that extra shelf space can be utilized. These slide rails can also hold up trays that can support heavy bottles and drinks. A new snack pan slide rail might be needed if the current ones have become stripped and are unable to latch onto the shelving to support it. It is common that these parts can become brittle over time as exposure to low temperature wears down the plastic. Be sure the shelving of the appliance is clear before attempting to replace the slide rail. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of appliances made by General Electric.

The Slide Bearing is an OEM part for GE refrigerators. This small but crucial component is typically located on the rails of refrigerator drawers, allowing them to slide in and out smoothly without sticking or jamming. The slide bearing helps reduce friction between the drawer and the frame, protecting the refrigerator's structure from wear and tear while ensuring a quieter, more efficient operation. 

Symptoms of a failing slide bearing include:

• Drawers becoming difficult to open or close
• Squeaking noises during drawer movement
• Increased resistance or jerking when pulling out the refrigerator drawers

Causes of slide bearing deterioration typically involve accumulation of food particles or debris, general wear from frequent use, or inadequate lubrication leading to increased friction and eventual wear out.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This slide rail is an OEM replacement part for GE refrigerators. The slide rail measures 1.25 inches in height, 2 inches in width, and 16 inches in depth.  This durable and reliable slide rail ensures smooth and effortless drawer operation. 

Causes of failure involve repeated impact stresses absorbing the weight of the heavy door opening and closing potentially thousands of daily times over 10-20 years. 

Symptoms of a faulty slide assembly include:

• Difficulty fully opening or closing the oven door  
• Binding, jamming or misalignment of door movement
• Visible bending or warping of metal slide track components
• Loose fasteners connecting assembly to cabinetry 

This OEM replacement part is also compatible with Hotpoint and RCA electric ranges as well.

NOTE: For the right-hand side order WR72X240. For the slide bearing order WR1X2048.

The Slide Assembly RH is an OEM replacement part for GE side-by-side refrigerators. As a replaceable sub-assembly, it restores smooth extension of plastic vegetable/multi-purpose slides on the right interior. The slide measures approximately 16 inches.

Symptoms of a bad slide assembly include: 

• Drawers failing to fully extend or retract inward  
• Difficulty using bins and storage sections 
• Noisy operation of problematic slides
• Stress concentration leading to cracks along slides

Causes stem from extended use gradually degrading nylon rollers and wear strips through inevitable friction. Exposure to excessive weights above slide limits may also bend or warp steel support rails quicker.

This genuine GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Left Hand Slide Assembly is an OEM component for GE bottom-mount refrigerators. It sits on the left side and smoothly guides the refrigerator shelf inserts in and out. This slide measures Approx 10 inches x 1 3/8 inch x 1 5/16 inch.

Symptoms of a faulty slide assembly include:

• Shelves difficult to fully extend or retract
• Grinding or rubbing noises from the shelf area 
• Visible signs of wear to plastic rollers and tracks

Causes relate to typical wear and tear over time under regular use. Improper loading of shelves can also potentially damage slide machinery.

For the right hand side order WR72X242. For the slide bearing order WR1X2048.

This GE replacement restores smooth shelf functionality, compatible with Hotpoint, RCA, and select Kenmore models as well.

The Slide Assembly RH is an OEM part for GE refrigerators. This slide assembly is designed to support and guide the refrigerator's drawers, ensuring smooth opening and closing. The slide measures approximately 10 inches x 1 3/8 inch x 1 5/16 inch. This is the right-hand side. For the left-hand side order WR72X241. For the slide bearing order WR1X2048.

Over time, the slide assembly can become worn out or damaged. Causes of a bad slide assembly can include frequent use, physical damage from overloading the drawers, or wear and tear on the sliding mechanism.

Symptoms of a bad Slide Assembly RH include:

• Difficulty opening or closing the refrigerator drawers
• Drawers not sliding smoothly or getting stuck
• Unusual noises when moving the drawers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a 10-24 x 1.0 inch screw used to secure appliance panels and components. It replaces worn or missing fasteners to restore proper fit and reduce rattling or loose parts for safer, quieter operation. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable
• Stops vibrating or rattling caused by loose or missing screws
• Restores proper grounding/attachment where a threaded fastener is required
• Matches OEM thread size and length for a correct fit when replacing damaged screws

• Use the correct driver bit and turn carefully to avoid stripping the head or threads
• Do not overtighten; snug until secure to prevent damage to mating parts
• Replace like-for-like with the same thread size and length for proper fit
• Disconnect power and follow appliance safety guidelines before accessing internal components