Frigidaire Cooktop Control Board

Electronic oven control board that manages the oven's functions and user interface, restoring temperature regulation and bake/broil cycles when the original control fails, helping return normal oven operation. What it does:

• Manages bake, broil and self-clean cycles and communicates with temperature sensors and relays.
• Replaces a failed control that can cause a blank or erratic display, incorrect temperatures, or an oven that won't heat.
• Helps resolve intermittent heating, unexpected shutoffs, and control-panel errors when the board is the root cause.
• Interfaces with the existing wiring harness and oven components to restore electronic control functions.

• Always disconnect power at the breaker before accessing or replacing the control board.
• Handle the board by the edges and avoid static discharge; ground yourself before touching electronics.
• Installation requires basic access to the oven's control cavity and may involve panel removal and reconnecting wiring harnesses.

Electronic clock/timer assembly that displays the time and manages timed cooking functions. Replaces a failed control clock to restore the clock readout, countdown timer and delay-start/timed-cook features. What it does:

• Displays current time and provides minute-timer/countdown functions used for timed cooking.
• Enables delay-start and timed-cook features when paired with the oven control.
• Common symptoms it fixes: blank or flickering display, clock not keeping time, timer not counting down, or unresponsive timer buttons.

• Disconnect power at the breaker before servicing to avoid shock.
• Access typically requires removing the control panel; handle the display lens and PCB carefully.
• Disconnect and reconnect the wiring harness by matching connector shapes; secure mounting screws before restoring power.
• After installation, set the clock and test timer/delay-start functions.

This mechanical timer replaces a failed or unresponsive oven/range timer to restore manual timing and cycle control. It provides a straightforward replacement for units that no longer count down or trigger timed operations. What it does:

• Advances and displays the set time so timed cooking cycles can run and finish as expected
• Starts or stops oven/range operations tied to the mechanical timer mechanism
• Replaces a timer that won't count down, won't stay set, or has a stuck/loose control shaft
• Restores manual countdown/alert functions used for timed cooking

• Disconnect power to the appliance before beginning any repair
• Label and photograph wire locations before removing leads; reinstall wires to the same terminals
• Align the timer shaft and mounting tabs carefully; do not force the shaft or overtighten fasteners

This main electronic control board manages the appliance's functions and user interface, restoring normal cycle selection and timed operations when the original board fails. Replaces a failed control to return reliable electronic control of the unit. What it does:

• Receives user commands and runs the appliance's operating cycles
• Controls timers, relays and display indicators for proper operation
• Common symptom: appliance won't start or respond to controls
• Common symptom: no or erratic display, or cycles stop unexpectedly
• Helps resolve issues caused by burned or shorted control circuitry

• Disconnect power before attempting any service to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use anti-static precautions
• Verify the appliance model and part number before ordering and swapping parts

This is a replacement refrigerator water filter cartridge that helps reduce taste and odor from your drinking water and ice for cleaner, better-tasting results. Ideal for refrigerators that use an inline/cartridge-style filter. What it does:

• Filters chlorine taste and odor to improve water and ice flavor
• Helps reduce common particulates and sediments from the water flow
• Restores normal water dispensing performance when the original filter is exhausted
• Commonly replaced when water tastes off, ice smells, or water flow is reduced

• Replace with the refrigerator powered off or water supply shut off when possible
• Follow refrigerator manufacturer instructions for proper seating, alignment, and filter reset
• Flush several gallons of water through the dispenser after installation to clear air and loose carbon fines
• Dispose of the used cartridge according to local regulations

This is the electronic control board that governs the appliance's main functions and user interface, replacing a failed board to restore normal control and cycle operation. It fits the OEM form and connects to factory wiring. What it does:

• Manages timed cycles, user inputs, and electronic commands for the appliance
• Controls display and indicator responses so settings register correctly
• Helps resolve symptoms like unresponsive controls, incorrect cycle behavior, or blank/error displays
• Interfaces with sensors and relays to coordinate heating, motor, and valve operation

• Disconnect power to the appliance before attempting service to avoid shock
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available

This electronic clock timer assembly controls the oven clock and timed cooking functions so you can set cook times, delays and use the timer/countdown features. It replaces a faulty control module to restore timer and display operation. What it does:

• Shows and keeps the oven clock time; allows setting delayed start and timed cook cycles
• Operates the oven's timer/countdown features and audible alerts
• Responds to front-panel touch pads/buttons for programming and control
• Common symptom: blank or unresponsive display, clock not keeping time, or timer functions not working

• One electronic clock timer/control assembly

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the display and control board carefully; avoid touching circuit traces and use anti-static precautions if available
• Installation typically requires removing the control panel or console

This generator is the OEM replacement rotary cam assembly that times and drives mechanical sequences so your appliance operates correctly. It restores proper cycle sequencing to help eliminate failures caused by a worn or damaged cam. What it does:

• Rotates and indexes internal cams/gears to control mechanical switching and timing
• Ensures correct sequencing of cycles and component engagement
• Commonly replaces noisy, stuck, or non-indexing cam assemblies
• Helps resolve symptoms like intermittent operation, failed cycle changes, or mechanical binding

• One generator (rotary cam assembly) as shown

• Disconnect power before servicing to avoid shock or injury
• Access may require panel removal and basic hand tools
• Verify alignment and timing marks during installation for proper operation

This is the electronic clock and oven control that manages bake and broil functions while displaying time, temperature, and status. Replacing a failed timer restores accurate temperature control and reliable oven operation.

• Regulates oven heating by sending power to bake and broil circuits
• Displays time, set temperature, and cycle status
• Buttons allow setting bake, broil, and timer functions
• Common failure symptoms: no oven heat, inaccurate temperature, unresponsive buttons, error codes, or a blank/partial display

• Disconnect power at the breaker before servicing
• Handle the control carefully; avoid static discharge to the board
• Note wire locations or take photos before removal
• After installation, verify operation and run a test bake

This ignition generator and wiring harness assembly routes power and provides the spark/ignition signal needed for gas appliance burners to light. It replaces a worn or damaged ignition assembly to restore reliable lighting. What it does:

• Sends ignition voltage to the burner igniters and electrodes so burners light reliably
• Routes and secures wiring between the control module and ignition components
• Common failure symptoms: burners won't light, continuous clicking, or intermittent ignition
• Works as the electrical interface between the control and the igniters for safe startup

• One generator and wiring harness assembly

• Disconnect electrical power and turn off the gas supply before starting work
• Follow the appliance OEM diagram for correct routing and connector locations
• Inspect connectors and electrodes for damage and replace if corroded or worn

The Control Board is an OEM part for Frigidaire ranges and ovens. It is responsible for managing various functions and operations of the appliance. This crucial component receives input from the control panel and user settings, and then translates these inputs into commands for the different components of the range, such as the oven heating elements, bake and broil functions, temperature regulation, and timer operations.

Causes of a faulty Control Board can be related to electrical issues, such as power surges, short circuits, or internal component failure due to age or wear and tear.

Symptoms of a bad Control Board can include: 

• Oven not heating or maintaining temperature properly
• Oven control panel not responding or displaying erratic behavior 
• Specific oven functions not working correctly
• Error codes or warning lights illuminated on the control panel

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.