Frigidaire Freezer Touch Pad

The Control Module is an OEM part for Frigidaire refrigerators. This electronic component manages and regulates the various functions of the refrigerator, including temperature control, defrost cycles, and the operation of fans and compressors.

You should replace the control module if it fails or malfunctions. Causes of a bad control module can include electrical surges, wear and tear over time, or exposure to moisture. Faulty wiring or damaged components within the module can also lead to failure.

Symptoms of a bad control module include:

• Inconsistent or incorrect temperatures in the refrigerator or freezer
• Refrigerator not cooling properly
• Frequent cycling on and off of the compressor
• Error codes displayed on the control panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Note: Control Only - Touchpad and housing no longer included.

The User Control Board is an OEM part for Frigidaire upright freezers. As the central processing unit, this board regulates all electrical components including temperature controls, diagnostic systems, and interface buttons located on the outside of the freezer door.

Symptoms of a failing user control board include:

• Fluctuating or unresponsive temperature settings
• Inoperative display, lights or control buttons
• Error codes and diagnostic problems appearing

Causes can include normal wear from extended use. Exposure to temperature fluctuations inside the freezer can also deteriorate electronic connections over time.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Electronic Control Board is an OEM replacement part for Frigidaire freezers. It functions to operate all freezer systems and components through electronic programming and input received from sensors. 

Causes of a failed control board can include moisture damage impairing circuitry over time, power surges disrupting electronics, or logic and memory failures.

Symptoms of a problematic control include:

• The freezer failing to cool or freeze properly
• Lights or other features not functioning as expected
• Error codes appearing regarding control faults  
• Sensors and components not responding to control signals

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is the electronic control board that governs the appliance's cooling system. It interprets sensor input and user settings to run key components, helping maintain consistent temperatures when the original controller becomes faulty or erratic.

• Monitors temperature sensor feedback and executes cooling cycles to hold the selected setpoint
• Controls major components on applicable models
• May manage additional functions like defrost timing or alarms depending on model design
• Failure can present as warm or unstable temperatures, unit not starting, short-cycling/running constantly, or unresponsive temperature adjustments

• Disconnect power before service; observe ESD precautions and handle the board by its edges
• Note wire/plug locations; transfer connectors to the new board one at a time
• Secure the board in its mounting and ensure all harnesses are fully seated
• Reassemble covers/panels before restoring power and checking operation

This electronic control board manages the appliance's core functions and user inputs so the unit can run cycles, regulate settings, and respond to commands reliably after the original board fails. What it does:

• Receives user inputs and runs timed/temperature/sequence commands for the appliance.
• Controls relays, displays, and sensors linked to normal operation.
• A failed board can prevent cycles from starting or cause unpredictable operation.

• Disconnect all power before servicing to avoid shock or damage.
• Handle the board by its edges and ground yourself to prevent static discharge.
• The connector layout must match your appliance before installation.

This electronic control is the oven's main user interface and control board, restoring reliable cycle selection and display feedback so your range or wall oven responds correctly and settings hold as expected. What it does:

• Interprets button/touchpad inputs and sends commands to heating elements, timers and relays.
• Restores or corrects digital display, clock and oven mode functions.
• Can resolve symptoms such as blank or erratic display, unresponsive controls, incorrect bake/clean cycles, or oven failing to start.
• Works as the central board that coordinates temperature and timing signals for normal oven operation.

• Always disconnect power at the breaker or unplug the appliance before inspecting or replacing controls.
• Handle the board carefully to avoid static discharge; avoid touching circuit traces or components.
• Follow the appliance's service manual or diagram for correct wire connections and panel reassembly.

This is the electronic temperature control board for select refrigerators/freezers with EZ Set controls. It regulates interior temperature based on sensor feedback and user settings to keep food safely stored.

• Monitors temperature sensor(s) and cycles compressor/defrost as designed
• Interfaces with EZ Set user controls to adjust cooling level
• Faulty boards can cause warm or too-cold temperatures, erratic cycling, or unresponsive controls
• May resolve intermittent cooling or control panel issues when properly diagnosed

• Unplug the appliance before servicing; use ESD protection when handling electronics
• Access location varies by model; note all wire connections before removal
• Handle connectors and board carefully; avoid bending pins or stressing harnesses
• After installation, restore power and allow 24 hours for temperatures to stabilize

This white replacement overlay restores the appliance's front finish and control labeling for a clean, factory appearance. It helps protect underlying controls from wear while keeping the console readable. What it does:

• Replaces a worn, faded, cracked, or discolored front overlay for a clean aesthetic
• Restores printed labels and button markings so controls are easy to read
• Protects the underlying control panel from spills and everyday wear
• Matches original fit and appearance for a seamless repair

• One white overlay

• Cosmetic part only; turn power off to the appliance before removing trim or panels
• Remove any clips or screws securing the old overlay and carefully peel away adhesive
• Align the new overlay precisely before securing; avoid stretching or creasing